Abstract:Mg-Zn-Sn-Mn alloy is a new type of age hardening wrought Mg alloy. However, the precipitation behavior of the alloy is still not well understood. A solution-treated Mg-6Zn-4Sn-1Mn alloy is selected as the experimental alloy in this paper. The hardening behavior, precipitate microstructure and precipitation sequence of the solution-treated alloy during single aging and double aging at 180 °C are systematically studied by means of XRD, OM, SEM, TEM, EDS and microhardness. The results show that four types of precipitated phases are successively precipitated in the experimental alloy during the aging treatment, namely, G.P. zone parallel to the (0001)α base plane, rod-like β1′(MgZn2) phase perpendicular to the (0001)α base plane, disc-like β2′ (MgZn2) phase parallel to the (0001)α base plane, and irregular β' (Mg2Sn or Mg3Sn) phase. The habitual plane of most β' phases is the (0001)α basal plane, and a small part of the β' phase forms a certain angle with the (0001)α basal plane. A large number of finely dispersed G.P. zones can provide the heterogeneous nucleation sites for the β1′ phase during the pre-aging stage, which promotes the nucleation of the precipitates during the second aging, so the peak aging hardness (87HV) of the double-aged alloy is much higher than that of the single-aged alloy (74HV), and the peak aging time (6 h) during second aging of the double aging is shorter than that (12 h) of single aging. The possible precipitation sequence of Mg-6Zn-4Sn-1Mn alloy during the isothermal aging treatment can be obtained, that is, α-Mn→β1′ (MgZn2)→β (MgZn) in the Mn-rich zone, and SSSS→G.P. zones→β1′ (MgZn2)→β2′(MgZn2)→β' (Mg2Sn or Mg3Sn)→(β (MgZn) and β (Mg2Sn)) in Zn-rich and Sn-rich zone.

Improvement in the age-hardening response of Mg–7Sn alloy by compressive stress-assisted aging

Remarkable age-hardening response and microstructural evolution of Mg-7Sn alloy

The Effect of Al on Microstructure and Properties of Cu-15Ni-8Sn During the Aging

Improvement of mechanical properties of hot extruded and age treated Mg–Zn–Mn–Ca alloy through Sn addition

Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration

Effects of Mg2Sn precipitation on the age-hardening and deformation behaviour of a Mg-Sn-Al-Zn alloy

Microstructure evolution and age-hardening response in Mg-Sn-Sm alloys under a wide range of Sm/Sn ratio

Enhanced Age-Hardening Response and Microstructure Study of an Ag-modified Mg–Sn–Zn Based Alloy

Improved age-hardening behavior of Mg-Sn-Mn alloy by addition of Ag and Zn

Aging hardening and precipitate behavior of a solution-treated Mg-6Zn-4Sn-1Mn (wt.%) wrought Mg alloy

Research Progress in Age-Hardenable Mg-Sn Based Alloys

Enhancement of Hardening and Thermal Resistance of Mg–Sn-based Alloys by Addition of Cu and Al

Effect of Sn addition on age-hardening and precipitation behavior of Al-Mg-Si alloys with different Mg/Si ratios

Influence of Sn and Zn on age-hardening behavior of Mg-6Al magnesium alloy

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Microstructure modification and precipitation strengthening for Mg–6Zn–1Mn–4Sn–0.5Ca through extrusion and aging treatment

Effect of a Trace Addition of Sn on the Aging Behavior of Al–Mg–Si Alloy with a Different Mg/Si Ratio

Pre-strain mediated fast natural aging in a dilute Mg-Zn-Ca-Sn-Mn alloy

Improving the Mechanical Properties of an Age-Hardenable Magnesium Alloy via Regulating Precipitate Scale and Building Dislocation Configuration

Study on the work-hardening behavior and tissue property analysis of high-strength magnesium alloy

Combined effect of Sn addition and pre-ageing on natural secondary and artificial ageing of Al–Mg–Si alloys