Abstract:Electrochemical electric double layer capacitors (EDLC) known as supercapacitors are used for high power density, long cycle life and good reversibility of charge/discharge processes[1]. Recent years, many Schiff base transition metal composites acting as an electroactive electrode material deposited on carbon nanotubes(CNTs) have been researched[2]. However, the CNTs tend to be random orientation, twining round and cross linked. So it urgently need to be addressed. In this paper, a given mass of NH4BF4 was added to CNTs and the electrode was prepared by the homodispersion of the raw support material in N-methyl- 2-pyrrolidone (NMP) through sonicating. The slurry was coated on a Ti sheet with the coating mass of 0.3 mg. The electropolymerization of Ni(salen) on the resulting electrode was conducted in a closed three-electrode compartment cell adopted chronoamperometry method. The introduction of NH4BF4 to the CNTs with a specific percentage (5wt. %, 10wt. %, 15 wt. %), and the modified samples were named as NBF5, NBF10, NBF15 respectively and the CNTs without NH4BF4 were taken as a control group and named as NBF0. As the cyclic voltammetric data summarized in Table 1, the values of apparent surface coverage(Γ) and doping level(n) of NBF5, NBF10 and NBF15 didn't appear to be much different from those of NBF0. However, the specific capacitance varied a lot. It can be seen that Cm of NBF15 is the most among the samples. Figure 1 depicts the GCD plots of the composite and CNTs at the current density of 1.0 mA cm-2. CNTs have symmetric change in the charge/discharge process which is the characteristic of high Coulombic efficiency. It is clear that the composites possess longer charge/discharge time than CNTs which indicating that poly[Ni(salen)] contributes the pseudo-capacitance derived from reversible redox switching between neutral and oxidative states on the basis of electric double-layer capacitance of MWCNTs. Because of the introduction of NBF, it became difficult for CNTs to twint together disorderly. And the morphylogy of the electrode support got homogeneous. NBF-containing carbon nanotube could provide basic sites, and consequently improved the deposition of polymer and enhance the performance of the electrode material. Acknowledgement This work is financially supported by the National Natural Science Foundation of China (No. 51372021). References [1] D. Kaufman, K.L. Hudson, R. Mcclamrock. Science. 343 (2014) 1210–1211. [2] Y. Zhang, J. Li, F. Gao, F. Kang, X. Wang, F. Ye, J. Yang. Electrochim. Acta. 76 (2012) 1–7. Figure 1

Investigating the suitability of pristine and defective C 3 N monolayer as supercapacitor electrodes: DFT calculations

Hierarchical nanohybrids with porous CNT-networks decorated crumpled graphene balls for supercapacitors.

Functionalised Biphenylene and Graphenylene: Excellent Choices for Supercapacitor Electrode

Modified 3D Graphene for Sensing and Electrochemical Capacitor Applications

Computational study of intrinsic defects on the electronic properties and quantum capacitance of Sc2CF2 monolayer

Validating Superior Electrochemical Outcome for Supercapacitor Application through First-Principles Calculations

Construction of 3D CrN@nitrogen-doped carbon nanosheet arrays by reactive magnetron sputtering for the free-standing electrode of supercapacitor

Ti–Cr–N Nanopyramid/Nitrogen-Doped Carbon Quantum Dot/Stainless Steel Mesh as a Flexible Supercapacitor Electrode

First-principles study on the effect of atomic swap on the electronic properties and quantum capacitance of Sc2CF2 monolayer

Defective Super-Long Carbon Nanotubes and Polypyrrole Composite for High-Performance Supercapacitor Electrodes

Nickel Cobalt Sulfide core/shell structure on 3D Graphene for supercapacitor application

The Electrochemical Performance of Nitrogen-Containing Carbon Nanotubes As the Electrode Material of Supercapacitors

In situ synthesis of C3N4/PPy/MnO2 nanocomposite as a high performance active material for asymmetric supercapacitor

High performance of 3D silicon nanowires array@CrN for electrochemical capacitors

In situ growth and anchoring NiCo2O4 nanowires on self-supported 3D holey graphene framework for supercapacitor

Synthesis of 2D layered Nb2SnC at low sintering temperature and its application for high-performance supercapacitors

CVD-Synthesis of MCMB/CNTs Hybrids with Low Specific Surface Area for Supercapacitors

Synthesis, characterization and charge storage properties of C 60 -fullerene microparticles as a flexible negative electrode for supercapacitors

Application of 3dg/cb/mno2 Electrode Material in Supercapacitors

A Three-Dimensional Ordered Mesoporous Carbon/carbon Nanotubes Nanocomposites for Supercapacitors

Highly conductive KNiF3@carbon nanotubes composite materials with cross-linked structure for high performance supercapacitor