Abstract:The lengthened ion pathway in restacked 2D materials greatly limits the electrochemical performance of practically dense film electrodes (mass loading >10 mg cm−2). Typical strategies such as the insertion of nanomaterials and 3D‐structure design is expected to reduce the volumetric capacitance of Ti3C2Tx electrodes, diminishing the dominating advantage of Ti3C2Tx over other electrode materials. Here, a novel, facile, and controllable H2SO4 oxidation method is developed for alleviating the restacking issue of Ti3C2Tx film with few electrochemically inactive side‐products such as TiO2. A hierarchical ion path "highway" in Ti3C2Tx film is fabricated with porous structure, atomic‐level increased interlayer spacing, and reduced flake size (through probe‐sonication). As a result, ultra‐high rate performance is obtained with high volumetric capacitance. For a ≈1.1 µm thick Ti3C2Tx film, capacitance retention of 64% is obtained (208 F g−1/756 F cm−3) when the scan rate is increased from 5 to 10,000 mV s−1. Even at higher mass loadings exceeding 12 mg cm−2 (48 µm thickness), the rate capability is still comparable to unoptimized Ti3C2Tx electrodes with low mass loading (1 mg cm−2). Consequently, a high areal capacitance of ≈3.2 F cm−2 is achieved for pathway‐optimized thick Ti3C2Tx film, which is of great significance for practical applications.

Validating Superior Electrochemical Outcome for Supercapacitor Application through First-Principles Calculations

Electrochemistry of Titanium Carbide MXenes in Supercapacitor

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

Development of MXene‐Enabled Titanium Carbide (TiC) Impurities‐Based Electrodes for the Fabrication and Circuit‐Level Testing of Gel‐Based Supercapacitors

Synthesis of Ti2CTx MXene As Electrode Materials for Symmetric Supercapacitor with Capable Volumetric Capacitance

Achieving High Pseudocapacitance of 2D Titanium Carbide (mxene) by Cation Intercalation and Surface Modification

Rational Fabrication of Flower-Like VS2-decorated Ti3C2 MXene Heterojunction Nanocomposites for Supercapacitance Performances

Origin of Theoretical Pseudocapacitance of Two-Dimensional Supercapacitor Electrodes Ti3C2T2 (T = Bare, O, S)

Two-dimensional V4C3 MXene As High Performance Electrode Materials for Supercapacitors

Surface nitrogen-modified 2D titanium carbide (MXene) with high energy density for aqueous supercapacitor applications

Enhanced electrochemical validation of metal organic frameworks-derived TiO2/Fe-TiO2 as an active electrode for supercapacitors

Optimizing Ion Pathway in Titanium Carbide MXene for Practical High‐Rate Supercapacitor

Construction of high-performance solid-state asymmetric supercapacitor based on Ti3C2Tx MXene/CuS positive electrode and Fe2O3@rGO negative electrode

Achieving of Flexible, Free‐Standing, Ultracompact Delaminated Titanium Carbide Films for High Volumetric Performance and Heat‐Resistant Symmetric Supercapacitors

Rational design of Ti3C2/carbon nanotubes/MnCo2S4 electrodes for symmetric supercapacitors with high energy storage

Enhanced supercapacitive performance of manganese oxides doped two-dimensional titanium carbide nanocomposite in alkaline electrolyte

In-situ Functionalization of Metal Electrodes for Advanced Asymmetric Supercapacitors

PrMnCo-Ti3C2 MXene nanocomposite-based supercapacitor for the optimization of electrochemical performance

Computational studies on electrochemical performances of doped and substituted $Ti_3C_2O_2$ MXene

Ag-Nanoparticle-Decorated 2D Titanium Carbide (mxene) with Superior Electrochemical Performance for Supercapacitors

Wet-Chemical Synthesized TiN-CuO Nanocomposite: Advancing Supercapacitor Technology with High Energy and Power Density