Origin of Theoretical Pseudocapacitance of Two-Dimensional Supercapacitor Electrodes Ti3C2T2 (T = Bare, O, S)

Lijing Wang,Jin Wang,Zhenzhou Zhang,Linxia Wang,Weihua Wang,Jieyu Liu,Zhanglian Hong,Kyeongjae Cho,Weichao Wang

DOI: https://doi.org/10.1039/c9ta03529j

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:A high theoretical limit of supercapacitance of MXene Ti3C2 is predicted based on rigid band approximation (RBA).

What problem does this paper attempt to address?

MXene-transition Metal Sulfide Composite Electrodes for Supercapacitors: Synthesis and Electrochemical Characterization

Xujiang Liang,Yuanqing Chen,Zhichao Jiao,Muslum Demir,Miao Du,Jiujin Han

DOI: https://doi.org/10.1016/j.est.2024.111634

IF: 9.4

2024-01-01

Journal of Energy Storage

Abstract:MXenes are gaining attention due to their unique 2D layered structures, but face limitations like restacking. Transition metal sulfides (TMS) are promising for energy applications, yet suffer from poor conductivity and volume changes during ion processes, leading to capacity fading. Therefore, we borrowed the structure of ZIF-L with a large specific surface area to synthesize TMS. Constructing heterostructures with metallic conductive MXenes and electrochemically active TMSs emerges as a promising strategy to enhance electrochemical performance and address these challenges. In the present paper, Ti 3 C 2 T X Mxene is successfully combined with TMS by a facile in-situ reaction. Based on the electrochemical analysis, Mxene/CoS/NF heterostructure electrode presents an area capacitance of 0.91 mAh/cm 2 , which is 9.78 times of that of pure MXene at a current density of 2 mA/cm 2 . Impressively, the assembled asymmetric supercapacitor retains a commendable 85.21 % of its original capacity even after 10,000 cycles. The power density of the assembled supercapacitor is 49.15 mW cm -3 , and the energy density is 1.42 mWh cm -3 . This underscores a practical and effective avenue for advancing research on Mxene-based electrodes.
Unveiling the Pseudocapacitance of Ti2C Monolayer for High Performance Electrochemical Capacitor: a First-Principles Study

Xiao Ji,Jianjun Jiang

DOI: https://doi.org/10.1149/ma2015-02/9/593

2015-01-01

ECS Meeting Abstracts

Abstract:Two-dimensional (2D) transition-metal (TM) compound nanomaterials have been widely investigated for electrochemical capacitor due to their high-surface-area and large potential of providing pseudocapacitance. Very recently, a new family of 2D materials called MXenes were synthesized and have been considered as one of the most promising pseudocapacitor electrode materials with respect to both power density and energy density. In this work, we employ first-principles calculations to study the electronic structures and redox potential and diffusion of Li on Ti2C monolayer, a representative MXene, based on density functional theory (DFT). The electronic structures indicate a significant redox pseudocapacitance characteristics as an anode with the redox potential at about 0.25 V and 0.75 V refer to the standard hydrogen electrode. Moreover, the calculated metallic behavior and low Li ions diffusion barriers suggest that Ti2C monolayer would manifest a low resistance in charging/discharging process. Our findings provide an evidence that the Ti2C monolayer is a promising electrochemical capacitor electrode material. Figure a shows the crystal structure of Ti2C monolayer in the top view and side view. The Ti and C are revealed by yellow and blue spheres, respectively. On the top view, the lighter yellow spheres consist of the first layer with the third layer formed by dim ones. Relative dispositions of PDOS and Integral DOS of d-orbitals of Ti atoms in Ti2C monolayers are shown in Figure b both on the vacuum scale and with respect to the SHE reference. The dot dashed red lines indicate the Fermi level positions of Ti2C monolayer. The light blue region represents the electrolyte window. To deliberate the diffusion of Ti2C monolayer, three pathways (Figure c) and corresponding energy barriers (Figure d) are considered. Figure 1
Probing the electrochemical capacitance of MXene nanosheets for high-performance pseudocapacitors.

Xiao Ji,Kui Xu,Chi Chen,Bao Zhang,Yunjun Ruan,Jia Liu,Ling Miao,Jianjun Jiang

DOI: https://doi.org/10.1039/c5cp07311a

IF: 3.3

2016-01-01

Physical Chemistry Chemical Physics

Abstract:Pseudocapacitors, which can store more energy at high charge/discharge rates, have attracted considerable attention. The performance of a pseudocapacitive material mainly depends on the interaction between electrode materials and the electrolyte ions. However, the understanding of the interaction is still limited. Here, the performance of Ti2CT2 (T = O, F, and OH) nanosheets as pseudocapacitor electrode materials has been investigated through a novel first-principles approach. The results suggest that O-terminated Ti2C nanosheets are shown to be pseudocapacitive cathode materials. The pseudocapacitance is attributed to the large intrinsic capacitance of Ti2CO2 nanosheets and contact adsorbed cations. The former mainly decides the capacity of charges and the latter reduces the change of potential in the electrode. The integral capacitance and Na-ion capacity of Ti2CO2 nanosheets are simulated to be 291.5 F g(-1) with a broad potential window range from 0 to 2.80 V (versus Na/Na+). Low diffusion energy barriers on Ti2CO2 and Ti2CF2 nanosheets indicate fast transportation and high charge and discharge rate for Na-ions. Our results provide insight into the origin of pseudocapacitance on stacked two-dimensional materials.
The Role Of Terminations And Coordination Atoms On The Pseudocapacitance Of Titanium Carbonitride Monolayers

Wenqiang Zhang,Chuan Cheng,Peilin Fang,Bin Tang,Jindou Zhang,Guoming Huang,Xin Cong,Bao Zhang,Xiao Ji,Ling Miao

DOI: https://doi.org/10.1039/c5cp06986f

IF: 3.3

2016-01-01

Physical Chemistry Chemical Physics

Abstract:Nowadays, MXenes have received extensive concern as a prominent electrode material of electrochemical capacitors. As two important factors to the capacitance, the influence of the intrinsical terminations (F, O and OH) and coordination atoms (C and N) is investigated using first-principles calculations. According to the density of states aligned with the standard hydrogen electrode, it turns out that a Ti3CNO2 monolayer is proven to show an obvious pseudocapacitive behavior, while the bare, F and OH terminated Ti3CN monolayers may only present electrochemical double layer characters in an aqueous electrolyte. Moreover, the illustration of molecular orbitals over the Fermi level are mainly contributed by the d-orbitals of Ti atoms coordinated with O and N atoms, indicating that the redox pseudocapacitance of the Ti3CNO2 monolayer is promoted by the coordination N atoms. Then the superiority of N bonded Ti atoms in accepting charges can be visualized through the charge population. Further, the larger ratio of C/N in the coordination environment of Ti atoms indicates that more electrons can be stored. Our investigation can give an instructional advice in the MXenes-electrode production.
Achieving High Pseudocapacitance of 2D Titanium Carbide (mxene) by Cation Intercalation and Surface Modification

Jian Li,Xiaotao Yuan,Cong Lin,Yanquan Yang,Liang‐Zhong Xu,Xin Du,Jinglin Xie,Jianhua Lin,Junliang Sun

DOI: https://doi.org/10.1002/aenm.201602725

IF: 27.8

2017-01-01

Advanced Energy Materials

Abstract:Supercapacitors attract great interest because of the increasing and urgent demand for environment‐friendly high‐power energy sources. Ti 3 C 2 , a member of MXene family, is a promising electrode material for supercapacitors owing to its excellent chemical and physical properties. However, the highest gravimetric capacitance of the MXene‐based electrodes is still relatively low (245 F g −1 ) and the key challenge to improve this is to exploit more pseudocapacitance by increasing the active site concentration. Here, a method to significantly improve the gravimetric capacitance of Ti 3 C 2 T x MXenes by cation intercalation and surface modification is reported. After K + intercalation and terminal groups (OH − /F − ) removing , the intercalation pseudocapacitance is three times higher than the pristine MXene, and MXene sheets exhibit a significant enhancement (about 211% of the origin) in the gravimetric capacitance (517 F g −1 at a discharge rate of 1 A g −1 ). Moreover, the as‐prepared electrodes show above 99% retention over 10 000 cycles. This improved electrochemical performance is attributed to the large interlayer voids of Ti 3 C 2 and lowest terminated surface group concentration. This study demonstrates a new strategy applicable to other MXenes (Ti 2 CT x , Nb 2 CT x , etc.) in maximizing their potential applications in energy storage.
Two-dimensional V4C3 MXene As High Performance Electrode Materials for Supercapacitors

Xin Wang,Shuai Lin,Haiyun Tong,Yanan Huang,Peng Tong,Bangchuan Zhao,Jianming Dai,Changhao Liang,Hai Wang,Xuebin Zhu,Yuping Sun,Shixue Dou

DOI: https://doi.org/10.1016/j.electacta.2019.03.205

IF: 6.6

2019-01-01

Electrochimica Acta

Abstract:Two-dimensional (2D) MXenes such as Ti3C2, Ti2C, Mo2C, and Mo133C have shown excellent electrochemical performances as supercapacitor electrodes, and the exploration of new and/or high-capacity MXene-based supercapacitor electrode materials is an active field. In this work, 2D multi-layered V4C3 MXene has been synthesized by selectively etching Al from V4AlC3 and it shows a high capacitance of 209 F g(-1) at 2 mV s(-1), good rate performance, and stable long cyclic performance with capacitance retention rate of 97.23% after 10000 cycles at 10 A g(-1) in 1 M H2SO4. Importantly, the pseudocapacitance (similar to 100.1 F g(-1)) accounts for about 37% of the total capacity (similar to 268.5 F g(-1)) for V4C3 MXene electrode. Therefore, the high specific capacitance of V4C3 MXene is not only due to their wide interlayer spacing (similar to 0.466 nm), large specific surface areas (similar to 31.35 m(2) g(-1)) and pore volumes (similar to 0.047 cm(3) g(-1)), and good hydrophilicity but also attributed to the abundant valence states of vanadium (+2, +3, and +4). The high rate performance and excellent cycling stability of V4C3 MXene electrodes are mainly attributed to the high electronic conductivity (1137 S m(-1) at 300 K). The present work provides another promising MXene-based supercapacitor electrode material. (C) 2019 Elsevier Ltd. All rights reserved.
Interlayer Engineering of Ti3C2Tx MXenes Towards High Capacitance Supercapacitors.

Minmin Hu,Renfei Cheng,Zhenjiang Li,Tao Hu,Hui Zhang,Chao Shi,Jinxing Yang,Cong Cui,Chaolan Zhang,Hailong Wang,Bingbing Fan,Xiaohui Wang,Quan-Hong Yang

DOI: https://doi.org/10.1039/c9nr08960h

IF: 6.7

2019-01-01

Nanoscale

Abstract:Electrochemical pseudocapacitors store energy via intercalation or electrosorption and faradaic charge transfer with redox reactions. MXenes represent the promising intercalation pseudocapacitive electrode materials for supercapacitors due to their ultrahigh theoretical capacitances. Achieving a high capacitance will greatly advance the large-scale applications as in power grids. However, a rational design concept has not been exploited to achieve the theoretical limit. Here, we show how interlayer engineering helps to achieve the limit. Interlayer engineering in this manner simultaneously creates a broadened yet uniform interlayer spacing - providing a "highway" for fast ion diffusion, and incorporates heteroatoms with lower electronegativity - offering "trucks" (redox active sites) on such a "highway" for speeding charge transfer, enabling high capacitance. Following the concept, through annealing the as-prepared Ti3C2Tx MXene under an ammonia atmosphere, the engineered MXene delivers much improved capacitance with excellent rate performance and cyclability. The overall performance of the engineered MXene outperforms that of all other pseudocapacitive electrode materials.
Electrochemistry of Titanium Carbide MXenes in Supercapacitor

Tingting Jiang,Yichen Wang,George Z. Chen

DOI: https://doi.org/10.1002/smtd.202201724

IF: 12.4

2023-05-03

Small Methods

Abstract:Titanium carbide MXenes offer interesting electrical and electrochemical properties and are being explored for uses in energy storage devices, particularly supercapacitors. Novel electrode materials are always explored to achieve better performance of supercapacitors. Titanium carbide MXenes, Ti3C2Tx, are one of the very promising candidates for electrode materials in supercapacitors due to their unique structural and ion storage properties as 2D materials. Their large specific surface area, adjustable functionalized surface terminals, high electrical conductivities, hydrophilicity, and high Faradaic capacitance, also known widely but confusingly as pseudocapacitance, are highly desirable for making high‐performance electrodes with increased dis‐/charging rates and capacities. Herein, some selective electrochemical considerations of Ti3C2Tx MXenes for uses in supercapacitors are critically reviewed and assessed, aiming at a better fundamental understanding of the electrochemical basics and processes in Ti3C2Tx MXene‐based electrode materials for supercapacitor applications.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Intensifying Electrochemical Activity of Ti3C2Tx MXene via Customized Interlayer Structure and Surface Chemistry

Minmin Hu,Lihong Chen,Yunqi Jing,Yuanyuan Zhu,Jun Dai,Alan Meng,Changlong Sun,Jin Jia,Zhenjiang Li

DOI: https://doi.org/10.3390/molecules28155776

IF: 4.6

2023-08-01

Molecules

Abstract:MXene, a new intercalation pseudocapacitive electrode material, possesses a high theoretical capacitance for supercapacitor application. However, limited accessible interlayer space and active sites are major challenges to achieve this high capacitance in practical application. In order to stimulate the electrochemical activity of MXene to a greater extent, herein, a method of hydrothermal treatment in NaOH solution with reducing reagent-citric acid is first proposed. After this treatment, the gravimetric capacitance of MXene exhibits a significant enhancement, about 250% of the original value, reaching 543 F g−1 at 2 mV s−1. This improved electrochemical performance is attributed to the tailoring of an interlayer structure and surface chemistry state. An expanded and homogenized interlayer space is created, which provides enough space for electrolyte ions storage. The –F terminations are replaced with O-containing groups, which enhances the hydrophilicity, facilitating the electrolyte's accessibility to MXene's surface, and makes MXene show stronger adsorption for electrolyte ion-H+, providing sufficient electrochemical active sites. The change in terminations further leads to the increase in Ti valence, which becomes more prone to reduction. This work establishes full knowledge of the rational MXene design for electrochemical energy storage applications.

chemistry, multidisciplinary,biochemistry & molecular biology
Pseudocapacitance of Bimetallic Solid‐Solution MXene for Supercapacitors with Enhanced Electrochemical Energy Storage

Zhiquan He,Li Yao,Wei Guo,Nana Sun,Fadi Wang,Yuhang Wang,Rongming Wang,Fengping Wang

DOI: https://doi.org/10.1002/adfm.202305251

IF: 19

2023-09-15

Advanced Functional Materials

Abstract:A chemically stable bimetallic solid‐solution MXene Ti2VC2 and its application as high capacitance and long lifetime proton pseudocapacitor electrodes are demonstrated. The hydrogel Ti2VC2 film show impressive volumetric capacitance (2670 F cm−3), surpassing the performance of most state‐of‐the‐art supercapacitor materials. The pseudocapacitance mechanism combines with pseudo‐intercalation and surface redox is revealed through in situ and ex situ experimental studies. MXenes, a family of 2D transition metal carbides, are considered promising high‐rate pseudocapacitive materials because of their metallic‐like conductivity and transition metal oxide‐like surfaces. Currently, nearly 50 stoichiometric MXenes have been synthesized. However, only a few MXenes, such as Ti3C2, have shown stable pseudocapacitive charge storage so far. Further improving the inherent pseudocapacitance of MXenes without losing their cyclability remains a challenge. Herein, a mild method is reported to produce highly stable bimetallic solid‐solution MXene Ti2VC2 using a solution of potassium fluoride and hydrochloric acid. The electrochemical properties of resulting multilayered clay‐like and delaminated Ti2VC2 films are investigated, exceeding the performance of typical Ti3C2 in acidic electrolytes. These electrodes deliver up to 2000 F cm−3 and retain more than 90% of their initial capacitance after 20 000 cycles, surpassing most state‐of‐the‐art supercapacitor materials known. The pseudocapacitive charge storage of Ti2VC2 is deeply investigated through in situ and ex situ experimental studies, confirmed the pseudocapacitive mechanism is a combination of hydrated H+ intercalation and surface redox. This work provides a practical route toward future rational design on the atomic scale for high‐performance pseudocapacitive materials.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Unraveling the Different Charge Storage Mechanism in T and H Phases of MoS2

Bao Zhang,Xiao Ji,Kui Xu,Chi Chen,Xiong,Junlin Xiong,Yifeng Yao,Ling Miao,Jianjun Jiang

DOI: https://doi.org/10.1016/j.electacta.2016.09.059

IF: 6.6

2016-01-01

Electrochimica Acta

Abstract:Two-dimensional MoS2 is a promising candidate for high performance electrochemical capacitors. However, the understanding of different capacitive performances of MoS2 with different phases is still limited. Herein, the pseudocapacitive and electrical double layer characters in T and H phases of MoS2 monolayer are systematically studied, by using first-principles calculations and molecular dynamic simulations. The electronic levels referenced to the vacuum level are utilized to discuss the intrinsic pseudocapacitive characters. The large density of states of T-MoS2 located at 0.25 V versus the standard hydrogen electrode indicates possible redox pseudocapacitance. Contrastively, the large band gap of H-MoS2 limits its pseudocapacitive behavior. Furthermore, the reaction with the Li atom is employed to shed more light on the possible redox behavior. The different shifts of Fermi levels in H and T phase confirm their different capacitive properties. Moreover, the electrical double layer capacitances character of MoS2 in aqueous solution is also investigated. The H-MoS2 exhibits similar double layer character with T-MoS2. The calculated double layer capacitances of MoS2 are comparable with graphene, and can reach 9.07 mu F/cm(2) and 7.42 mu F/cm(2) for anode and cathode, respectively. The combined calculations shed more light to explore other two-dimensional transition-metal dichalcogenides as supercapacitors electrode materials. (C) 2016 Elsevier Ltd. All rights reserved.
High-Capacitance Mechanism for Ti3C2Tx MXene by in Situ Electrochemical Raman Spectroscopy Investigation.

Minmin Hu,Zhaojin Li,Tao Hu,Shihao Zhu,Chao Zhang,Xiaohui Wang

DOI: https://doi.org/10.1021/acsnano.6b06597

IF: 17.1

2016-01-01

ACS Nano

Abstract:MXenes represent an emerging family of conductive two-dimensional materials. Their representative, Ti3C2Tx, has been recognized as an outstanding member in the field of electrochemical energy storage. However, an in-depth understanding of fundamental processes responsible for the superior capacitance of Ti3C2Tx MXene in acidic electrolytes is lacking. Here, to understand the mechanism of capacitance in Ti3C2Tx MXene, we studied electrochemically the charge/discharge processes of Ti3C2Tx electrodes in sulfate ion-containing aqueous electrolytes with three different cations, coupled with in situ Raman spectroscopy. It is demonstrated that hydronium in the H2SO4 electrolyte bonds with the terminal O in the negative electrode upon discharging while debonding occurs upon charging. Correspondingly, the reversible bonding/debonding changes the valence state of Ti element in the MXene, giving rise to the pseudocapacitance in the acidic electrolyte. In stark contrast, only electric double layer capacitance is recognized in the other electrolytes of (NH4)2SO4 or MgSO4. The charge storage ways also differ: ion exchange dominates in H2SO4, while counterion adsorption in the rest. Hydronium that is characterized by smaller hydration radius and less charge is the most mobile among the three cations, facilitating it more kinetically accommodated on the deep adsorption sites between the MXene layers. The two key factors, i.e., surface functional group-involved bonding/debonding-induced pseudocapacitance, and ion exchange-featured charge storage, simultaneously contribute to the superior capacitance of Ti3C2Tx MXene in acidic electrolytes.
Quantum capacitance of supercapacitor electrodes based on M 2 C MXenes with pure -O and mixed termination: A first-principles study

Hai-Tao Yan,Rui-Zhou Zhang,Xiao-Hong Li,Hong-Ling Cui

DOI: https://doi.org/10.1016/j.jelechem.2023.117529

IF: 4.598

2023-05-10

Journal of Electroanalytical Chemistry

Abstract:MXenes have drawn great attention as potential electrode material because of the high capacitive performance. However, there are little information about the quantum capacitance (C diff ) and surface storage charge (Q) of M 2 C MXene with pure -O and mixed surface termination. In this paper, density functional theory (DFT) is utilized to explore the C diff and Q of M 2 CO 2 monolayers with 3d, 4d and 5d transitional metals (TM) in aqueous and ionic/organic systems. The most stable configurations for the studied systems are confirmed. Sc 2 CO 2 , Zr 2 CO 2 and Hf 2 CO 2 monolayers are potential cathode materials. Ti 2 CO 2 monolayer is a potential anode material. The wide voltage has little influence on the electrode type of materials. M 2 CO 2 monolayers gradually transfer from cathode to anode material with the weakening metallicity of transitional metal atom. M 2 C MXenes with mixed configuration are further explored. M 2 CO 0.42 F 1.19 (OH) 0.39 (M=Sc, Cr, Nb, Ta) are cathode materials in aqueous system, M 2 CO 0.42 F 1.19 (OH) 0.39 (M=Ti, V, Zr, Mo, Hf, W) are suitable for anode materials.

chemistry, analytical,electrochemistry
Ultrahigh gravimetric and volumetric capacitance in Ti3C2Tx MXene negative electrode enabled by surface modification and in-situ intercalation

Weifeng Liu,Yifan Zheng,Zhi Zhang,Yanan Zhang,Yonghui Wu,Hanxiao Gao,Jun Su,Yihua Gao

DOI: https://doi.org/10.1016/j.jpowsour.2021.230965

IF: 9.2

2022-02-01

Journal of Power Sources

Abstract:Two-dimensional titanium carbide (MXene) has attracted significant attentions in supercapacitors owing to its high metallic conductivity and excellent chemical properties. However, the inherent restacking issue and –F surface termination severely limit the energy storage. Here, an effective strategy to construct high-performance Ti3C2Tx MXene (A-Ti3C2Tx/PANI) based on the synergistic effect of modified surface termination, expanded interlayer spacing and three-dimensional structure is reported. Benefiting from the interconnected structure, enhanced electrochemical activity and efficient ion/electron transport layer, the prepared negative electrode demonstrates an outstanding specific capacitance of 652.3 F g−1 at 1 A g−1 (∼3 times of the pristine MXene), an impressive rate capability with 81% capacitance retention at 50 A g−1, and excellent cycling stability with above 99% capacitance retention after 10, 000 cycles. In addition, a symmetric supercapacitor is fabricated using A-Ti3C2Tx/PANI, and it delivers a high energy density of 20.3 Wh kg−1. Furthermore, the prepared free-stranding film electrode based on A-Ti3C2Tx/PANI shows a high volumetric capacitance of 2368 F cm−3. The improved gravimetric and volumetric capacitances surpass almost all the reported MXene-based electrodes. This study demonstrates a new strategy to enhance the electrochemical performance of Ti3C2Tx electrode and could be a universal way applicable to other MXenes.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Enhancing Capacitance Performance of Ti3C2Tx MXene as Electrode Materials of Supercapacitor: From Controlled Preparation to Composite Structure Construction

Xiaobei Zang,Jiali Wang,Yijiang Qin,Teng Wang,Chengpeng He,Qingguo Shao,Hongwei Zhu,Ning Cao

DOI: https://doi.org/10.1007/s40820-020-0415-5

2020-03-20

Abstract:Abstract Ti 3 C 2 T x , a novel two-dimensional layer material, is widely used as electrode materials of supercapacitor due to its good metal conductivity, redox reaction active surface, and so on. However, there are many challenges to be addressed which impede Ti 3 C 2 T x obtaining the ideal specific capacitance, such as restacking, re-crushing, and oxidation of titanium. Recently, many advances have been proposed to enhance capacitance performance of Ti 3 C 2 T x . In this review, recent strategies for improving specific capacitance are summarized and compared, for example, film formation, surface modification, and composite method. Furthermore, in order to comprehend the mechanism of those efforts, this review analyzes the energy storage performance in different electrolytes and influencing factors. This review is expected to predict redouble research direction of Ti 3 C 2 T x materials in supercapacitors.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Validating Superior Electrochemical Outcome for Supercapacitor Application through First-Principles Calculations

Sheheera Irfan,Yasir Abdul Haleem,Muhammad Usman,Naseeb Ahmad,Muhammad Arshad,Muhammad Imran Irshad,Muhammad Farooq Saleem,Muhammad Habib,Rashid Khan,Sebahat Altundag

DOI: https://doi.org/10.1039/d3nj05075k

IF: 3.3

2024-02-10

New Journal of Chemistry

Abstract:This work explores the characteristics of two-dimensional (2D) Titanium Carbide (Ti3C2 MXene) and utilizes First Principle calculations to weigh its potential for supercapacitor applications. Scanning electron microscope images confirm the platelet-like morphology and Energy-dispersive X-ray spectroscopy (EDX) analysis supports the extraction of Aluminum from the MAX phase. The Fourier-transform infrared spectroscopy (FTIR) confirms the presence of oxygen-based functional groups on the surface, whereas, X-ray diffraction (XRD) patterns validate the hexagonal crystalline structure. Cyclic voltammetry (CV) analysis reveals the presence of redox peaks, indicating the pseudocapacitive behaviour of the fabricated electrode. Additionally, galvanostatic charge-discharge (GCD) measurements yield a calculated specific capacitance of 370 F/g. Electrochemical impedance spectroscopy (EIS) substantiates the low impedance resulting from the platelet-like structure by adequate adsorption/desorption of cations. The utilization of First-Principle density functional theory (DFT) calculations reveals the merging of conduction and valence bands, signifying effective conductivity. Both the total and partial density of states cross the Fermi level, indicating a highly efficient charge mobility process. The combination of prominent surface redox reactions and excellent conductivity contributes to the superior specific capacitance of the fabricated electrode. Overall, these results highlight the excellent electrochemical outcomes, declaring Ti3C2 MXene electrode as an aspirant for supercapacitor applications.

chemistry, multidisciplinary
Computational studies on electrochemical performances of doped and substituted $Ti_3C_2O_2$ MXene

Mandira Das,Subhradip Ghosh

DOI: https://doi.org/10.48550/arXiv.2204.08704

2022-04-19

Abstract:Using Density functional theory (DFT) in conjunction with a solvation model we have investigated the phenomenon of eletrode-electrolyte interaction at the electrode surface and its consequences on the electrochemical properties like the charge storage and total capacitance of doped and substituted oxygen functionalised Ti$_{3}$C$_{2}$ supercapcitor electrode. We have studied nitrogen doped, nitrogen substituted and molybdenum substituted Mxenes in acidic electrolyte H$_{2}$SO$_{4}$ solution. By considering nitrogen doping at different sites, we found that the greatest capacitance is obtained for doping at functional sites. Our results agree well with the available experiment. We also found that the enhancement in capacitances due to nitrogen doping is due to amplifications in the pseudocapcitances. We propose that the primary mechanism leading to the enhanced value of the capacitances due to nitrogen doping is surface redox activity. The performances for substituted systems, on the other hand, are degraded in comparison to the pristine ones. This suggests that better storage capacities in Ti$_3$C$_{2}$O$_{2}$ electrode can be obtained by doping only. We provide insights into the reasons behind contrasting behaviour in doped and substituted systems and suggest ways to further improve the capacitances in doped system.

Materials Science
New Ti3-yNbyC2Tx MXenes As High-Rate and Ultra-Stable Electrode Materials for Supercapacitors

Qiang Wang,Xiao Zhang,Zhipeng Chen,Yuxin Zhao,Wei Yao,Jianguang Xu

DOI: https://doi.org/10.1016/j.jallcom.2023.170128

2022-01-01

Abstract:Despite being a promising supercapacitor electrode material, the development of Ti3C2Tx has still been limited by many obstacles, such as restacking Ti3C2Tx nanosheets and non-electrochemically active fluorine terminations on the surface. Herein, new double transition metal Ti3-yNbyC2Tx MXenes are prepared by etching Ti3-yNbyAlC2 solid solution MAX precursors obtained by self-propagating high-temperature synthesis method for the first time. The synthesized Ti3-yNbyC2Tx MXenes exhibit larger interlayer spacing and more surface-O terminations than Ti3C2Tx, resulting in superior rate performance and high cycling stability as supercapacitors electrode materials. In particular, Ti2.9Nb0.1C2Tx demonstrates a high volumetric specific capacity of 1014 F cm-3 at a scan rate of 2 mV s-1, superior rate performance with a volumetric specific capacity of 422 F cm-3 at a scan rate of 2000 mV s-1, and ultra-long cycling life up to 84000 cycles at a current density of 10 A g-1. This work expands the practical applicability of the MXenes family in energy storage applications and provides a promising strategy to tailor the MXenes interlayer structure and surface chemistry.(c) 2023 Elsevier B.V. All rights reserved.
Retraction of "Surface Functional Groups and Interlayer Water Determine the Electrochemical Capacitance of Ti3C2Tx MXene".

Cong Cui,Jinxing Yang,Xiaohui Wang,Zhaojin Li,Renfei Cheng,Yi Yang,T. Hu,Minmin Hu

DOI: https://doi.org/10.1021/acsnano.1c01871

IF: 17.1

2021-03-23

ACS Nano

Abstract:MXenes, an emerging class of conductive two-dimensional materials, have been regarded as promising candidates in the field of electrochemical energy storage. The electrochemical performance of their representative Ti3C2Tx, where T represents the surface termination group of F, O, or OH, strongly relies on termination-mediated surface functionalization, but an in-depth understanding of the relationship between them remains unresolved. Here, we studied comprehensively the structural feature and electrochemical performance of two kinds of Ti3C2Tx MXenes obtained by etching the Ti3AlC2 precursor in aqueous HF solution at low concentration (6 mol/L) and high concentration of (15 mol/L). A significantly higher capacitance was recognized in a low-concentration HF-etched MXene (Ti3C2Tx–6M) electrode. In situ Raman spectroscopy and X-ray photoelectron spectroscopy demonstrate that Ti3C2Tx–6M has more components of the −O functional group. In combination with X-ray diffraction analysis, low-field 1H nuclear magneti...

Chemistry,Medicine,Materials Science

Origin of Theoretical Pseudocapacitance of Two-Dimensional Supercapacitor Electrodes Ti3C2T2 (T = Bare, O, S)

MXene-transition Metal Sulfide Composite Electrodes for Supercapacitors: Synthesis and Electrochemical Characterization

Unveiling the Pseudocapacitance of Ti2C Monolayer for High Performance Electrochemical Capacitor: a First-Principles Study

Probing the electrochemical capacitance of MXene nanosheets for high-performance pseudocapacitors.

The Role Of Terminations And Coordination Atoms On The Pseudocapacitance Of Titanium Carbonitride Monolayers

Achieving High Pseudocapacitance of 2D Titanium Carbide (mxene) by Cation Intercalation and Surface Modification

Two-dimensional V4C3 MXene As High Performance Electrode Materials for Supercapacitors

Interlayer Engineering of Ti3C2Tx MXenes Towards High Capacitance Supercapacitors.

Electrochemistry of Titanium Carbide MXenes in Supercapacitor

Intensifying Electrochemical Activity of Ti3C2Tx MXene via Customized Interlayer Structure and Surface Chemistry

Pseudocapacitance of Bimetallic Solid‐Solution MXene for Supercapacitors with Enhanced Electrochemical Energy Storage

Unraveling the Different Charge Storage Mechanism in T and H Phases of MoS2

High-Capacitance Mechanism for Ti3C2Tx MXene by in Situ Electrochemical Raman Spectroscopy Investigation.

Quantum capacitance of supercapacitor electrodes based on M 2 C MXenes with pure -O and mixed termination: A first-principles study

Ultrahigh gravimetric and volumetric capacitance in Ti3C2Tx MXene negative electrode enabled by surface modification and in-situ intercalation

Enhancing Capacitance Performance of Ti3C2Tx MXene as Electrode Materials of Supercapacitor: From Controlled Preparation to Composite Structure Construction

Validating Superior Electrochemical Outcome for Supercapacitor Application through First-Principles Calculations

Computational studies on electrochemical performances of doped and substituted $Ti_3C_2O_2$ MXene

New Ti3-yNbyC2Tx MXenes As High-Rate and Ultra-Stable Electrode Materials for Supercapacitors

Retraction of "Surface Functional Groups and Interlayer Water Determine the Electrochemical Capacitance of Ti3C2Tx MXene".