Abstract:The electrodeposition of a Cu–Sn binary alloy on stainless steel from a cyanide-free alkaline electrolyte containing EDTA·2Na and C4H4O6KNa was investigated to explore the possibility of a cyanide-free double complexing system that maintains the decorative quality and coating performance. The Cu–Sn co-deposition occurred at −0.95 Vvs.Hg|HgO, and the height of cathode peak A from the BR bath was −0.0280 A. EDTA·2Na could simultaneously complex with Cu ions and Sn ions, while C4H4O6KNa could only complex with Cu ions, which was shown through the analysis of the cyclic voltammetry (CV) curves together with the nuclear magnetic resonance (NMR) results. The molar concentration ratio and sum of the two main salts or the two complexing agents, and the pH of the electroplating solutions were shown to influence the surface micromorphology, composition and phase structure of the Cu–Sn coatings. The scanning electron microscopy (SEM) analysis showed that the Cu–Sn coating obtained from the bath with EDTA-tartrate double complexing agents exhibited smaller grain sizes than that obtained from the bath with the single EDTA or tartrate complexing agent, and the smallest grain size of 0.2 μm was obtained from the BR bath. In addition to being smaller than the others, this coating contained uniform particle sizes. The energy-dispersive X-ray spectroscopy (EDS) analysis indicated that the composition of the Cu–Sn coating obtained from the BR bath was 92.8 wt% Cu and 7.2 wt% Sn, and this coating was golden in colour. X-ray diffraction (XRD) showed that the Cu–Sn coatings were crystalline and were composed of a mixture of Cu, Cu6Sn5, [Cu, Sn] and Cu10Sn3 phases, indicating the formation of Cu–Sn binary alloy. These results may provide theoretical guidance for the electrodeposition technology of other alloy coatings.

Synthesis of Cu-As Alloys from Simulated Copper Electrolyte by a Controllable Electroplating Method

Electrochemical Analysis of Cathode in TSV Copper Electroplating

Study on Cu-Sn Alloy Electrodeposition

Electrochemical Redox of Arsenic (III) and Cu (II) Mixtures with Ultraflat Au(111) Thin Films in Water

Effect of deposition potential on electrodeposition of Sn-Ag-Cu ternary alloy solderable coating in deep eutectic solvent

Synthesis of coplanar quaternary ammonium salts with excellent electrochemical properties based on an anthraquinone skeleton and their application in copper plating

Corrosion Behaviour of Cu-Sn-Zn Ternary Alloy Electrodeposited via Less Hazardous Electrolyte

Electrodeposition, Structural, and Corrosion Properties of Cu Films from A Stable Deep Eutectics System with Additive of Ethylene Diamine

Co-treatment of copper electrolytic sludges and copper scraps for the recycled utilization of copper and arsenic

Study on alkaline and acid-alkaline chemical plating of Cu

Study on electrodeposition and corrosion resistance of Cu-Sn alloy prepared in ChCl-EG deep eutectic solvent

Composition and structure of arsenic–antimony alloy electrodeposited from acidic chloride solution

The electrodeposition of low-Sn imitation gold Cu–Sn alloy from EDTA-tartrate double complexing agents

Study on the Behavior of Zn–Fe Alloy Electroplating

Study on Electroless Deposition Using Glyoxylic Acid As Reducing Agent for Copper Interconnection

Effects of Fe(III) and Cu(I) on Electrodeposition and Microstructure Characterization for Acid Plating Bath

Properties and Microstructure Regulation of Electrodeposited Ultra-thin Copper Foil in a Simple Additive System

Electrodeposition and characterization of Zn–Sn alloy coatings from a deep eutectic solvent based on choline chloride for corrosion protection

Composition-Tunable Properties of Cu(Ag) Alloy for Hybrid Bonding Applications

Boosted direct electrochemical reduction of As(III) from arsenic wastewater via Cu(II)-assisted codeposition on a CuIn alloy electrode

Electrocrystallization of Cu, Sn, and Сu-Sn alloys from sulfate electrolytes in the presence of thiourea and N -octylpyridinium bromide: Experimental and computational studies