Abstract:Al-Zn-Mg-Cu aluminum alloys are typically heat-treatable aluminum alloys. The heat treatment has a significant effect on the microstructure and mechanical properties of Al-Zn-Mg-Cu alloy. In this study, the solid solution temperature of achieving ultra-high strength in wire-arc additive manufactured 7B55 aluminum alloy was systematically investigated. The results showed that the microstructure of the as-deposited 7B55 aluminum alloy was composed of equiaxed grains with an average grain size of 4.2 ± 0.5 μm. A large number of the second phases were continuously distributed along grain boundaries. The precipitated phases within grains were mainly composed of the larger η phases and the smaller η′ phases, and the amount of precipitated phases was fewer. The second phases distributed along grain boundaries gradually dissolved into α-Al matrix with the increase of solid solution temperature, resulting in a higher supersaturation of the α-Al matrix and more homogeneous distribution of alloy elements. Combined with the results of DSC analysis, the optimal solid solution temperature of the 7B55 aluminum alloy was determined to be 480 °C. After solid solution of 480 °C,the microstructure was still composed of equiaxed grains with an average grain size of 4.8 ± 0.4 μm. The size of the grain did not grow significantly. A larger number of nanoscale fine GP zones, η′ phases and secondary Al 3 (Sc,Zr) particles were precipitated within the grains during subsequently artificial aging process, resulting in a significant increase in tensile properties. The ultimate tensile strength (UTS), yield strength (YS) and elongation (EL) reached 621 MPa, 555 MPa and 5.73%, respectively, which was significantly higher than the strength level of WAAM aluminum alloy reported among all the existing literature.

Microstructure and mechanical properties of wire arc additively manufactured 205A high strength aluminum alloy: The comparison of as-deposited and T6 heat-treated samples

Enhanced High-Temperature Strength and Ductility of Wire Arc Additive Manufactured Al-Ce-Mg Alloys with Fine Α-Al/al11ce3 Eutectics

Microstructural and mechanical properties of wire-arc additively manufactured Al–Zn–Mg aluminum alloy: The comparison of as-deposited and heat-treated samples

Mechanical properties and precipitation behavior of the heat-treated wire + arc additively manufactured 2219 aluminum alloy

Microstructure and Mechanical Properties of Wire + Arc Additively Manufactured 2024 Aluminum Alloy Components: As-deposited and Post Heat-Treated

Microstructure and mechanical properties of wire arc additive manufactured ZL205A alloy

Microstructure evolution and mechanical properties of wire-arc-additively manufactured Al–Cu–Mg–Ag alloy

Microstructure and Mechanical Properties of Al-Cu-Mg Alloy Fabricated by Double-Wire CMT Arc Additive Manufacturing

Microstructure and mechanical properties of 1 double-wire + arc additively manufactured Al-2 Cu-Mg alloys 3

Effect of Thermo-Mechanical Treatment on Microstructure and Mechanical Properties of Wire-Arc Additively Manufactured Al-Cu Alloy

Microstructure and properties research of Al-Zn-Mg-Cu alloy with high strength and high elongation fabricated by wire arc additive manufacturing

Wire arc additive manufacturing of the Al-5.55Cu alloy: Insight the effect of intrinsic heat treatment on microstructure and mechanical properties

Observation of In-Situ Tensile Wire-Arc Additively Manufactured 205A Aluminum Part: 3D Pore Characteristics and Microstructural Evolution

Microstructure evolution and mechanical properties of wire arc additively manufactured Mg-Gd-Y-Zr alloy by post heat treatments

The heterogeneous band microstructure and mechanical performance in a wire + arc additively manufactured 2219 Al alloy

Microstructure Evolution of Wire-Arc Additively Manufactured 2319 Aluminum Alloy with Interlayer Hammering

Study on the solid solution temperature of achieving ultra-high strength in wire-arc additive manufactured Al-Zn-Mg-Cu aluminum alloy

The structure and mechanical properties of high-strength aluminum alloys fabricated with wire arc additive manufacturing

Microstructure tuning enables synergistic improvements in strength and ductility of wire-arc additive manufactured commercial Al-Zn-Mg-Cu alloys

Microstructure evolution and mechanical properties of the wire + arc additive manufacturing Al-Cu alloy

Microstructure evolution and mechanical properties of the wire plus arc additive manufacturing Al-Cu alloy