Abstract:Performances of point contact EHL on multilayered or coated substrates have been analyzed in this paper via computer simulations, with emphasis on comparing the effects of Newtonian and non-Newtonian lubricants. The lubrication system consists of a rigid ball in contact with a smooth coated flat. The coating is perfectly bonded to an elastic substrate and it has a uniform thickness. The rigid ball has surface velocity U relative to the contact point. The hydrodynamic pressure p is governed by a generalized Reynolds equation in which the non-Newtonian effects of lubricants are characterized by two factors whose values are determined based on lubricant rheology. The Papkovich-Neuber potentials were employed to get the response functions in frequency domain for layered contact problems, and the influence coefficients relating pressure to surface displacements and stresses can be obtained via invert Fourier transform. The surface deformation was then calculated in terms of the pressure-displacement influence coefficients and the DC-FFT method was used to speed up the computation. The distributions of pressure, film thickness and subsurface stress have been analyzed for lubricants with different rheological behaviors, from which pressure and film thickness profiles along the rolling direction are calculated for Newtonian and Non-Newtonian lubricants. The central film thickness become thicker for stiffer coatings in the case of Newtonian lubricants, but the trend is reversed for Non-Newtonian lubricants. The surface stresses along the rolling direction show a spike corresponding to the pressure, which is more significant with stiffer coatings in the Newtonian case, but the spike is less visible for Non-Newtonian lubricants.

A traction coefficient formula for EHL point contacts operating in the linear isothermal region

EHL Properties of Roller Contacts and Its Application Part Ⅱ: A Numerical Analysis of EHL for Engineering Logarithmic Roller

A Thermal Equilibrium Analysis of Line Contact Hydrodynamic Lubrication Considering the Influences of Reynolds Number, Load and Temperature

Rolling Traction in Isoviscous-Rigid, Piezoviscous-Rigid, and Elastohydrodynamic Lubrication Regimes at Line Contact

A fast calculation approach for elastohydrodynamic finite line contacts applicable to online calculations of rolling bearing models

An analytical friction model for point contacts subject to boundary and mixed elastohydrodynamic lubrication

Finite element analysis of transient thermomechanical rolling contact using an efficient arbitrary Lagrangian–Eulerian description

Generalisation of the linear theory of rolling contact to a single double-elliptic contact region and its application to solve non-Hertzian contact problems using extended FASTSIM

Numerical Analysis Of Point Contact Ehl On Coated Substrates

Thermal Non-Newtonian EHL Analysis of Rib-Roller End Contact in Tapered Roller Bearings

Finite element modelling of frictional thermomechanical rolling/sliding contact using an arbitrary Lagrangian–Eulerian formulation

Elastohydrodynamic Traction and Film Thickness at High Speeds

A Computer Thermal Model of Mixed Lubrication in Point Contacts

A full numerical solution for transient elastohydrodynamic contacts with an eyring fluid

A Mixed Elastohydrodynamic Lubrication Model With Asperity Contact

Distribution and diagram of stress in three-dimensional non-newtonian EHL contacts

Numerical evaluation of the transient response due to non-smooth rolling contact using an arbitrary Lagrangian–Eulerian formulation

Generalised scaling law for soft contact tribology: Influence of load and asymmetric surface deformation

Effects of differential scheme and viscosity model on rough-surface point-contact isothermal EHL

An Engineering Approach to Hertzian Contact Elasticity—Part I

EHL Performance of the Lubricant with Shear Strength: Part I — Boundary Slippage and Film Failure