Abstract:The feature of instrumented indentation test (IIT) makes it suitable for the characterization of local constitutive behavior in a small volume of solids. In the present study, the relationship between the shape of the normalized loading P-h curve and the indenter tip rounding radius, and the influences of the constitutive parameters of a Ludwik-type isotropic hardening model on the shape and the initial slope of the normalized unloading P-h curve were investigated by theoretical analysis and sophisticated numerical sensitivity analysis. From the analytical results, a two-stage analytical approach that can inversely identify multiconstitutive parameters simultaneously was proposed. In the first stage, by considering the least-square distance between the experimental and the simulated normalized loading P-h curves (g(h/hmax)) as the objective and C1 in the tip area function as the input variable, the tip rounding was identified by a single-objective optimization procedure. With the optimal tip rounding, a multiobjective optimization procedure was then performed to identify the constitutive parameters of the target materials. The initial slope of the normalized unloading P-h curve (ΔS’(P/Pmax-h/hmax)), absolute value of the differences between the simulated and the experimental maximum load (ΔPmax), initial slope of the unloading P-h curve (ΔS), and contact hardness (ΔH) were set as objectives, while all the material parameters except the Poisson's ratio (v) were considered as input variables. Results of the numerical verification with a set of arbitrarily selected constitutive parameters and the experimental verification on Ti-18 (a near-β high-strength titanium alloy) fit fairly well with uniaxial tensile parameters. With regard to T40, the identified true stress-true plastic strain curve is about 20% higher than the uniaxial tensile curve. One possible explanation is the occurrence of the strength differential and anisotropy effects during the plastic deformation process of α-phase titanium. It is worthy to be noticed that the present study may propose a new way to calibrate the tip area function directly on the target material without any standard indentation sample and improve the quality of the identification of the material constitutive parameters by IIT.

Stress–Strain Curve Estimation from Load–depth Curve of Spherical Indentation Test Based on Finite Element Analysis and Optimization

Determining engineering stress-strain curve directly from the load-depth curve of spherical indentation test

A Critical Appraisal of the Instrumented Indentation Technique and Profilometry‐Based Inverse Finite Element Method Indentation Plastometry for Obtaining Stress–Strain Curves

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Representative Stress-Strain Curve by Spherical Indentation on Elastic-Plastic Materials

Experimental Methodology for Obtaining the Flow Curve of Sheet Materials in a Wide Range of Strains

Analysis of Microindentation Unloading Curves based on Representative Strain Approach with Closed-Form Applications

Research on Determining Elastic–Plastic Constitutive Parameters of Materials from Load Depth Curves Based on Nanoindentation Technology

Study of plastically deformed region underneath the ball in indentation tests and evaluation of mechanical properties of materials through finite element simulation and a hybrid algorithm

New Approach to Stress-Strain Curve Prediction Using Ball Indentation Test

Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves

Identification of Material Properties Using Indentation Test and Shape Manifold Learning Approach

Study on Concavity-Convexity Transition of Loading Curve for Spherical Indentation

Analysis of FEM Cubic Representative Volume Element along Specified Stress Path

Inverse Identification of Constitutive Parameters with Instrumented Indentation Test Considering the Normalized Loading and Unloading P-h Curves

Three-dimensional Finite Element Analysis of Shallow Indentation of Rough Strain-Hardening Surface

An Energy-Based Method to Extract Plastic Properties of Metal Materials from Conical Indentation Tests

Measuring Material Plastic Properties with Optimized Representative Strain-Based Indentation Technique

Determining plastic properties of a material with residual stress by using conical indentation

Conversion of the kinetic indentation diagrams of ball indenter into stress-strain curves for metallic structural materials

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain