Abstract:Acceptance sampling plans used in a typical quality control process, are developed to provide optimal sample size(s) and acceptance (rejection) criterion. In order to apply a sampling plan, a knowledge of acceptable quality level (AQL), a lot tolerance percent defective (LTPD), and the specification of two types of errors (type I and type II) are required. The traditional methods assume that quality control inspectors, inspection tools, and computation processes are free from any errors under normal conditions. However, it has been shown that in practice inspectors, inspection tools as well as computation processes are all erroneous. These errors will have significant impact on sample size(s), decision criterion, average outgoing quality (AOQ), and the operating characteristics curve (OC Curve).The impact of imperfect inspection on AOQ, sample size(s), and OC curves for a two stage sampling plan are presented in this paper. In a two stage sampling plan, the decision to reject or accept a lot is made through two tandem stages of the inspection process. The first stage inspection is performed at the low level component, where m components constitute a single item. An acceptance decision for a single item is made based on the observed number of defects (non-conformities), while an acceptance decision of a given lot depends on the number of defective (non-conforming) items.A simulation program has been developed to investigate the sensitivity of AOQ and OC curves when one or both types of errors (type I and type II) deviate from their specified levels. The computational experiments show that inspection errors cause the discrepancies between the computed values and the specified values. The analysis of simulation results leads us to conclude that, when inspection errors are present, the traditional sampling plans without inclusion of inspection errors are misleading and incorrect.

Modified chain sampling plans for lot inspection by variables and attributes

A new approach of chain sampling inspection plan

Two-Stage Chain Sampling Inspection Plans with Different Sample Sizes in the Two Stages

Developing a variables modified chain sampling plan with Taguchi capability index

Chain Sampling Inspection Plans Based on Bayesian Methodology

Attribute Sampling Plan for Submitted Lots Based on Prior Information and Bayesian Approach

Chain sampling plan for variables inspection

A modified chain group sampling inspection plan for the time truncated life test and it’s applications

Developing a variables multiple dependent state sampling plan with simultaneous consideration of process yield and quality loss

Developing a sampling plan by variables inspection for controlling lot fraction of defectives

Lot-dependent sampling plans for qualifying long-term production capability with a one-sided specification

Developing a skip-lot sampling scheme by variables inspection using repetitive sampling as a reference plan

Analysis of two stage sampling plan with imperfect inspection

An adjustable inspection scheme for lot sentencing based on one-sided capability indices

Time truncated life tests for new attribute sampling inspection plan and its applications

Chain Sampling Scheme under Constant Inspection Errors

A new acceptance sampling plan using Bayesian approach in the presence of inspection errors

A Method of Sampling Inspection

Process‐capability‐qualified adjustable multiple‐dependent‐state sampling plan for a long‐term supplier–buyer relationship

Optimal designing of skip-lot sampling plan with a provision for reducing the normal inspection using the Taguchi process capability index

Designing of a mixed-chain sampling plan based on the process capability index with chain sampling as the attributes plan