Abstract:The diluted layer‐by‐layer (N‐LBL) strategy is employed to fabricate all‐polymer solar cells (all‐PSCs). Such film‐forming strategy combined the advantage of traditional bulk‐heterojunction and LBL methods, and thus exhibited suitable donor–acceptor interfaces and optimal photon utilization behaviors. Consequently, a high short‐circuit current density over 26 mA cm−2 and promising power conversion efficiencies of 18.33% are realized for N‐LBL prepared all‐PSCs. Disordered polymer chain entanglements within all‐polymer blends limit the formation of optimal donor–acceptor phase separation, and thus the performance of all‐polymer organic solar cells (all‐PSCs). Considering the challenge and importance of morphology regulation in all‐PSCs, a diluted layer‐by‐layer (N‐LBL) strategy is thereby adopted to fine‐tuning the properties of all‐polymer blends. When comparing the traditional PM6:PY‐IT based bulk‐heterojunction (BHJ) film and PM6/PY‐IT layer‐by‐layer (LBL) film, the N‐LBL film, which is prepared from diluted PM6 (with 3% PY‐IT) bottom layer and diluted PY‐IT (with 6% PM6) top layer, displayed a clearer bi‐continuous fibrillar network and a higher exciton generation process. Benefiting from these unique characters, the all‐PSC consisting the N‐LBL active layer exhibited a short‐circuit current density over 26 mA cm−2 and a power conversion efficiency (PCE) of 18.33%, which are both higher than those of BHJ (16.88%) and LBL (17.13%) devices. Moreover, the universality of the dilution strategy in other all‐polymer blends (PM6 and PY‐DT, PM6 and PY‐FT‐o) is also demonstrated with unanimously improved device performance. This work underscores the effectiveness of the diluted layer‐by‐layer method in tuning the morphologies and charge dynamics for high‐performance all‐PSCs.

Optimizing Double‐Fibril Network Morphology via Solid Additive Strategy Enables Binary All‐Polymer Solar Cells with 19.50% Efficiency

Solid additive engineering enables high-efficiency and eco-friendly all-polymer solar cells

High performance all-polymer solar cells enabled with solvent and solid dual additives

Improved Molecular Ordering in a Ternary Blend Enables All‐Polymer Solar Cells over 18% Efficiency

Manipulating Polymer Backbone Configuration via Halogenated Asymmetric End-Groups Enables Over 18% Efficiency All-Polymer Solar Cells

Asymmetrified Benzothiadiazole-Based Solid Additives Enable All-Polymer Solar Cells with Efficiency Over 19

Isomerized Green Solid Additive Engineering for Thermally‐Stable and Eco‐Friendly All‐Polymer Solar Cells with Approaching 19% Efficiency

Morphology Optimization Via Side Chain Engineering Enables All Polymer Solar Cells with Excellent Fill Factor and Stability

An Optimized Fibril Network Morphology Enables High‐Efficiency and Ambient‐Stable Polymer Solar Cells

Fine Optimization of Morphology Evolution Kinetics with Binary Additives for Efficient Non-Fullerene Organic Solar Cells

A polymer acceptor with double-decker configuration enhances molecular packing for high-performance all-polymer solar cells

Multifunctional Solid Additive Enabling All-Polymer Solar Cells with Improved Efficiency, Photostability and Mechanical Durability

Improving Miscibility of Polymer Donor and Polymer Acceptor by Reducing Chain Entanglement for Realizing 18.64% Efficiency All Polymer Solar Cells

Binary All‐polymer Solar Cells with a Perhalogenated‐Thiophene‐Based Solid Additive Surpass 18% Efficiency

Effective Regulation of Morphologies and Exciton‐Generation Process Enables Quasi‐Planar All‐Polymer Organic Solar Cells Exceed 18% Efficiency

Layer-by-layer processed binary all-polymer solar cells with efficiency over 16% enabled by finely optimized morphology

High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing.

Approaching 19% Efficiency and Stable Binary Polymer Solar Cells Enabled by a Solidification Strategy of Solvent Additive

Nonfullerene Acceptors with Enhanced Solubility and Ordered Packing for High-Efficiency Polymer Solar Cells

Realizing 19.05% Efficiency Polymer Solar Cells by Progressively Improving Charge Extraction and Suppressing Charge Recombination

End‐extended Conjugation Strategy to Reduce the Efficiency‐Stability‐Mechanical Robustness Gap in Binary All‐Polymer Solar Cells