Abstract:The deep-v planing hull is designed to operate at high speeds because most of the hull’s weight is supported by the hydrodynamic lift acting on the hull base. Planing hull form characteristics such as deadrise angle, chines, and extended stern significantly affect the ship’s hydrodynamic performance. The addition of the interceptor is an innovation to reduce the total resistance of the ship by controlling the trim angle. However, the form of the ship’s stern is not always the same; thus, it needs to be studied based on the form of the ship’s stern. The extended stern form refers to modifying the hull geometry at the rear, particularly the stern extension beyond its conventional length. This research aimed to analyze the hydrodynamic performance of the interceptor at the extended stern angle. Furthermore, Computational Fluid Dynamics (CFD) simulations were performed to analyze the effect of the extended stern form. A numerical model of the deep-V planing hull with variations of the stern extension was developed, and the flow behavior around the hull was analyzed using CFD techniques. Simulations were conducted under various operating conditions, including different speeds and interceptor strokes. The results indicated that the extended stern's different forms could affect the ship's resistance, trim, and heave. The reduction in resistance was seen at moderate speeds, thereby reducing steep trim angles. The greater the extended stern angle, the more significant the reduction in ship resistance at Fr 0.58 by 26%. Likewise, the combination of interceptor and extended stern experienced a decrease in resistance in the semi-displacement phase with a percentage of 33% resistance, 66% trim, and 47% heave. The interceptor stroke (d) depended on the boundary layer (h). The extended stern with angles of 10°, 20°, and 30° were found to have d/h ratios of 0.38, 0.37, and 0.34. However, it should be noted that extending the stern without interceptors and with interceptors at high speeds could result in a dangerous increase in resistance on high-speed vessel.

The Prediction of Hydrodynamic Performance of Pinisi Ship

Research on the Hydrodynamic Performance of a Pentamaran in Calm Water and Regular Waves

Numerical Study of Hydrodynamic Performance of A High Maneuverability Ocean Engineering Ship with Pod Propeller Design

Performance evaluation on the designed v-shaped monohull ship models

KAJIAN SEAKEEPING KAPAL FERRY RO-RO 750 GT BERBASIS PENGUJIAN HIDRODINAMIKA

Fluid Dynamic Simulation of Sail Design Performance on Sail-Assisted Ship; A Preliminary Study

Preliminary Study of Ship Maneuvering Prediction of Container Ship

Influence of the canal width and depth on the resistance of 750 DWT Perintis ship using CFD simulation

Analysis of Stern Shape Effect on Pre-Duct Propeller Performance Based on Numerical Simulation

Analysis Of The Effect Of Side Hull Position On Rolling Motion Characteristics On Trimaran Ship

Investigation on hydrodynamics of fast ships with different bowshapes in waves and restricted waters

Design of Hybrid Hull Ship by B-NINE TEAM to The National Unmanned Fast Boat Contest 2019

Resistance Analysis of Rescue Boat in Calm Water Condition

Comparison of Selected Parametric Methods for Prediction of Inland Waterways Ship Hull Resistance in Towing Tank Test

STUDI PERANCANGAN KAPAL FERRY RO-RO MODEL KATAMARAN DI PERAIRAN DANAU TOBA

A Study of Hybrid Prediction Method for Ship Parametric Rolling

Performance of Rescue Boat Operation when Operated in Waves

Analysis of plated-hull structure strength against hydrostatic and hydrodynamic loads: A case study of 600 TEU container ships

Advancing Interceptor Design: Analyzing the Impact of Extended Stern Form on Deep-V Planing Hulls

Numerical Evaluation of Transversal Strength of Traditional Fishing Vessel in Penajam Paser Utara, East Kalimantan, Indonesia

Numerical Estimation of Hull Hydrodynamic Derivatives in Ship Maneuvering Prediction