Abstract:Porous inserts and nanofluids are among the conventional methods for the amelioration of heat transfer in industrial systems. The heat transfer rate could also be improved by utilizing porous substances with a higher thermal conductivity in these systems. This research work presents a two-dimensional (2D) numerical examination of the laminar forced convection of an Al2O3-CuO-carboxy methyl cellulose (CMC) non-Newtonian hybrid nanofluid within an annular pipe in a porous medium. The porous medium was inserted within two inner or outer wall cases. For hybrid nanofluid flow modeling in porous media, a Darcy–Brinkman–Forchheimer formulation was employed. Additionally, a power-law technique was utilized as a fluid viscosity model for the considered non-Newtonian fluid. The governing equations were discretized according to the finite volume method (FVM) using the computational fluid dynamics (CFD) software package ANSYS-FLUENT. The cylinder walls' thermal boundary conditions were exposed to a constant heat flux. For various Darcy numbers, the impacts of different volume fractions of the hybrid nanofluid (0% to 5%), the total Nusselt number, the pressure drop, and the performance number (PN) were evaluated. The outcomes indicate that the heat transfer coefficient increases considerably with a decrease in the Darcy number (0.1 to 0.0001), as well as with an increase in the porous thickness ratio. Moreover, it was found that the nanoparticles' increased volume fraction would ameliorate the heat transfer and, more considerably, the PN factor. Furthermore, according to the outcomes in both cases I and II for a constant porous thickness ratio and Darcy number (rp=1,Da=0.0001) and a high volume fraction (φ=5%), the maximum total Nusselt number reached 1274.44. Moreover, applying a volume fraction of 5% with Da=0.1 and rp=1 reached the highest value of the PN index equal to 7.61, which is augmented as roughly 88% compared to the case of a zero volume fraction.

Investigation of nano composite heat exchanger annular pipeline flow using CFD analysis for crude oil and water characteristics

Two-Phase Crude Oil-Water Flow Through Different Pipes: An Experimental Investigation Coupled with Computational Fluid Dynamics Approach

CFD analysis on heat and flow characteristics of double helically coiled tube heat exchanger handling MWCNT/water nanofluids

Investigation on the enhancement of heat transfer in counterflow double-pipe heat exchanger using nanofluids

Friction Factor And Heat Transfer Of Nanofluids Containing Cylindrical Nanoparticles In Laminar Pipe Flow

Numerical evaluation of the heat transfer in a shell and corrugated coil tube heat exchanger with three various water‐based nanofluids

Heat transfer innovation of engine oil conveying SWCNTs-MWCNTs-TiO2 nanoparticles embedded in a porous stretching cylinder

Computational analysis of radiative engine oil-based Prandtl–Eyring hybrid nanofluid flow with variable heat transfer using the Cattaneo–Christov heat flux model

A numerical exploration of the comparative analysis on water and kerosene oil-based Cu–CuO/hybrid nanofluid flows over a convectively heated surface

A Computational Fluid Dynamics Study of Laminar Forced Convection Improvement of a Non-Newtonian Hybrid Nanofluid within an Annular Pipe in Porous Media

Experimental investigation for heat transfer performance of CuO-water nanofluid in a double pipe heat exchanger

Computational Modelling and Simulations to Study the Thermal Enhancement in Nanofluid Flow in Undulating Wavy Cavity of a Cylinder: Finite Element Analysis

Analysis of homogeneous steady state nanofluid surrounding cylindrical solid pipes

The study of heat transfer and laminar flow of kerosene/multi-walled carbon nanotubes (MWCNTs) nanofluid in the microchannel heat sink with slip boundary condition

Analysis of carbon nanotubes-based nanofluid with paraffin oil in 3D MHD Darcy-Forchheimer flow through a bi-directional stretchable surface: Application to heat exchanger systems

Computational investigation on the energy efficiency of heat exchangers using Al2O3 nanofluids

A numerical study of water based nanofluids in shell and tube heat exchanger

An experimental study on MWCNT–water nanofluids flow and heat transfer in double-pipe heat exchanger using porous media

Two-phase simulation of nanofluid flow in a heat exchanger with grooved wall

Evaluating the efficiency and effectiveness of non-Newtonian fluid flow in a double-pipe heat exchanger with porous medium via numerical simulation

Experimental study of viscous oil-water core-annular flow in horizontal pipe