Experimental study of viscous oil-water core-annular flow in horizontal pipe

Mohamed Hassan Alashker,Ali Abdelaziz Zahran,Mohamed Elfaisal Elrefaie,Ali Abuelezz

DOI: https://doi.org/10.1177/09544062231206666

2023-12-18

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Transporting viscous oils through pipelines is usually challenging due to their very high viscosity. Significant friction reduction in the transportation of viscous oils through pipelines using an ecologically friendly way is the most appealing feature of the core annular Flow (CAF) technique. An experimental study has been conducted to investigate the flow patterns and pressure gradient of viscous oil-water two-phase flow in a horizontal acrylic pipe with a 50 mm inner diameter. The test section was equipped with a fluid lubrication injector element to artificially provide CAF. The pressure gradient measurements were focused on the CAF pattern. The prediction models of the CAF pressure gradient were reviewed and evaluated. An empirical prediction model of CAF pressure gradient was developed, relying on both the present and previously published experimental results. The flow patterns were classified into five patterns. It was observed that the CAF occupied a large region in the constructed flow pattern map and its frictional pressure gradient closely resembles that of water flowing alone. It was found that the developed empirical model provided quite good predictions of the experimental pressure gradients and significantly outperformed the original model. The reviewed prediction models in this area for CAF either overpredicted or underpredicted the experimental pressure gradients. Some of these models considered the extensive effect of viscous oil adhered to the inner wall of the pipe, while others neglected the effect entirely.

engineering, mechanical