Abstract:Summary Batch transportation of oil and water is a new transportation method in oil and gas gathering and transportation pipelines. Its corrosion inhibition effect has been preliminarily verified in a horizontal pipe experiment. However, achieving overall visualization in traditional loops is difficult, resulting in limited flow pattern classification and analysis of influencing factors. Combining the advantages of the traditional flow loop and the wheel flow loop, we introduce in this paper a round-head straight pipe loop and analyze the influence of key factors on the evolution of the flow pattern of the oil-water interface and the dimensionless length of the oil-water film (L~o, L~w) on the pipe wall through computational fluid dynamics (CFD) numerical simulation. The results show that the batch transportation of oil and water using the round-head straight pipe loop is more in line with the flow characteristics of oil and water two-phase flow in gathering pipelines. Three distinct three-layered flow patterns were identified, which are Flow Pattern I (oil-in-water in the upper layer, annular flow in the middle layer, and oil as the annular phase, water as the core phase, and oil-in-water in the lower layer, abbreviated as DW/O-AN-DW/O), Flow Pattern II (oil phase in the upper layer, annular flow in the middle layer, water as the annular phase, oil as the core phase, and oil in the lower layer, abbreviated as O-AN-O), and Flow Pattern III (oil phase in the upper layer, water-in-oil dispersion flow in the middle layer, and oil in the lower layer, abbreviated as O-DO/W-O). Additionally, parametric analysis reveals that the velocity of the rigid body (ν) has the greatest influence on the coverage rate of the oil film on the pipe wall, followed by the viscosity of crude oil. The density of crude oil has the least influence. The round-head straight pipe loop model offers an accurate simulation of the process of oil and water batch transportation in actual production pipelines. Therefore, the corrosion mitigation efficiency increases with the increase in oil viscosity when the viscosity of the oil lies within the range of 0.01–1 Pa·s. This increase is due to the formation of a more stable oil film on the pipe wall at higher viscosities. When the speed of the rigid body ranges from 0.5 to 1 m/s, due to the small fluid velocity, the erosion effect on the oil film on the pipe wall is relatively small, and the corrosion mitigation efficiency remains stable within a wide range.

Two-Phase Crude Oil-Water Flow Through Different Pipes: An Experimental Investigation Coupled with Computational Fluid Dynamics Approach

Assessment of Ansys-Fluent Code for Computation of Two-Phase Flow Characteristics: A Comparative Study of Water-Air and Silicone Oil-Air In A Vertical Pipe

Oil-Water Two-Phase Flow with Three Different Crude Oils: Flow Structure, Droplet Size and Viscosity

A Unified Model of Oil/Water Two-Phase Flow through the Complex Pipeline

Investigation of nano composite heat exchanger annular pipeline flow using CFD analysis for crude oil and water characteristics

Understanding two‐phase flow behaviour: CFD Assessment of silicone oil–air and water–air in an intermediate vertical pipe

Hydrodynamic Modeling of Oil–Water Stratified Smooth Two-Phase Turbulent Flow in Horizontal Circular Pipes

Experimental Investigation of Oil-Water Two-Phase Flow in Horizontal, Inclined, and Vertical Large-Diameter Pipes: Determination of Flow Patterns, Holdup, and Pressure Drop

An experimental study on pressure drop of air-oil flow in horizontal pipes using two synthetic oils

Computational fluid dynamics (CFD) simulation of three-phase non-Newtonian slurry flows in industrial horizontal pipelines

Experimental study of horizontal two- and three-phase flow characteristics at low to medium liquid loading conditions

Experimental Investigation of Interfacial Wave in Stratified Low-Viscosity-oil and Water Flow in Horizontal and Upward Pipes

Direct numerical simulation of two-phase pipe flow: influence of the domain length on the flow regime

Computational Fluid Dynamics Simulation of Oil-Water Batch Transport in a Pumpless Virtual Flow Loop

Experimental investigation of oil–water flow in the horizontal and vertical sections of a continuous transportation pipe

Experimental study of viscous oil-water core-annular flow in horizontal pipe

CFD Simulation of Two-Phase Vertical Annular Flow in Both Upward and Downward Direction in a Small Pipe

Experimental and CFD‐Based Simulation of Oil‐in‐Water Emulsion Flow‐through Pipeline

Experimental Investigation of the Flow Characteristics in Crude Oil Containing Sand and Gas Flowing Along Vertical Pipelines

Flow pattern, pressure drop and inclination analysis on liquid-liquid two phase flow of waxy crude oil in pipelines using PIPESIM

Experimental investigation on flow patterns and pressure gradients of shale oil-water flow in a horizontal pipe