Abstract:Seismic risk assessment on a regional scale requires an estimation of ground motion intensity and its spatial variation over large geographical areas. This task is particularly challenging in the presence of very soft soil deposits where significant amplification occurs at specific frequencies that are often referred to as local resonances. It is often not feasible to conduct a nonlinear site response analysis at thousands of sites of interest across a region such as an urban area due to the computational effort involved and the required detailed information on soil profiles at each site. Thus, in regional seismic risk analyses the hazard is typically represented by a field of response spectral ordinates estimated by ground motion models. This study proposes a simplified site response analysis procedure to improve the characterization of spectral ordinates to be used in regional seismic risk assessments. In the proposed procedure, reduced-order models are used to conduct site response analysis using very few parameters to transform response spectra at rock outcrop into response spectra at the surface of each of the sites. A particular emphasis is given to soft-soil sites characterized by low shear-wave velocities overlaid on rock or firm soils. A non-uniform continuous shear beam model with a parabolic variation of shear modulus along the depth and modal damping is used in combination with Random Vibration Theory. It is shown that the proposed approach provides better estimates than those of ground motion models or physics-based ground motion simulation models which often cannot capture the local resonances. Site-specific validation of the shear beam model and overall simplified site response analysis is performed at four soft-soil sites in San Francisco, California. Despite its simplicity, it is shown that the proposed procedure adequately captures the amplitudes and spectral shapes of the motions. It is also shown that in conjunction with ground motion models or physics-based models, the proposed simplified site response analysis procedure can be used to efficiently simulate the seismic hazard on a regional scale through an example of a regional seismic hazard analysis of 160 softer soil sites in Downtown San Francisco during the Loma Prieta earthquake.

Earthquake response prediction of seismically isolated buildings based on the response spectrum method considering changes in characteristics of lead rubber bearings due to repeated deformations

EARTHQUAKE RESPONSE PREDICTION OF SEISMICALLY ISOLATED BUILDINGS BASED ON RESPONSE SPECTRUM METHOD CONSIDERING CHANGES IN CHARACTERISTICS OF LEAD RUBBER BEARINGS DUE TO REPEATED DEFORMATION

A new average response spectrum method for linear response analysis of structures to spatial earthquake ground motions

A Direct Displacement-Based Design Procedure for Base-Isolated Building Structures with Lead Rubber Bearings (Lrbs)

Seismic responses of multi-story building isolated by Lead-Rubber Bearings considering effects of the vertical stiffness and buckling behaviors

Application of Response Spectrum Analysis of Multiply Supported System, with the Multi-Directional Excitations and Residual Rigid Response

Influence of ground motion characteristics on the heating effect of lead‐rubber bearings in base‐isolated structures

Performance of a passive rate‐independent damping device in a seismically isolated multistory building

Modeling and Response Prediction in Performance-Based Seismic Evaluation: Case Studies of Instrumented Steel Moment-Frame Buildings

Estimation of inelastic displacement ratio spectrum for existing RC structures via displacement response spectrum

An Analytical Method for Elastic Seismic Response of Structures Considering the Effect of Ground Motion Duration

Seismic performance of buildings with novel self‐centering base isolation system for earthquake resilience

Influence of ground-motion duration on seismic performance of shallow-founded buildings in liquefiable soils: An effective stress analysis approach

Analytical model for response spectral ratio considering the effect of earthquake scenarios

Characteristics of Response Spectra for Long-Periods of Main-Shock Recordings of the Chi-Chi Earthquake

A Critical Evaluation of the Coefficient Method, Capacity Spectrum Method and Modal Pushover Analysis for Irregular Steel Buildings in Seismic Zones

General evaluation method of seismic resistance of residential house under multiple consecutive severe ground motions with high intensity

Performance‐Based Seismic Design With Consideration of Safe Storage From Errors in Reinforced Concrete Member Estimated Yield Deformation

Simplified site response analysis for regional seismic risk assessments

Real‐time hybrid simulation for investigating the seismic response of a bridge isolated with lead rubber bearings

Shaking Table Test and Dynamic Response Prediction on an Earthquake-Damaged RC Building