Abstract:In this paper, the seismic collapse fragility analysis of special steel moment-resisting frame (MRF) buildings with strength and stiffness deterioration is comprehensively evaluated, taking into account the effect of record selection based on the spectral shape parameters. For this purpose, three special steel moment-resisting frame buildings, including 3, 10, and 20-story structures as representatives of low-rise, mid-rise, and high-rise buildings, are investigated. The modified bilinear Ibarra-Medina-Krawinkler (IMK) relation is used for modeling the concentrated plasticity and considering cyclic degradation in beams and columns under earthquake effects in Incremental Dynamic Analysis (IDA). The ground motion records are selected and categorized based on the three parameters, including the epsilon, SaRatio , and N p from a large database consisting of 2000 earthquake records. The records are divided into 7 groups using the epsilon parameter. The SaRatio and N p parameters further divide the records into 5 categories. Additionally, a randomly selected set of 200 earthquake records is used. The effects of hysteretic deterioration and spectral shape parameters of earthquake records on the median IDA curves, collapse fragility curves, and collapse capacity of the steel MRF structures are investigated. In addition to the hysteretic deterioration of steel structural members based on the results of the previous experiments, different values of the deterioration parameter (λ) are used in the nonlinear time history analyses to parametrically study the effect of deterioration on the collapse capacity. Finally, the effect of various parameters on the seismic collapse capacity of the structures in the form of Tornado diagrams is illustrated. The results demonstrate that the randomly selected records yield results close to the records sets with N p = 1, SaRatio = 1, and ε = 0. Furthermore, for a constant deterioration level, increasing epsilon and SaRatio , and decreasing N p lead to an increase in the collapse capacity of the structures. The results also show that the effect of deterioration on the collapse capacity of the buildings, especially the low-rise 3-story building, is significant.

A Critical Evaluation of the Coefficient Method, Capacity Spectrum Method and Modal Pushover Analysis for Irregular Steel Buildings in Seismic Zones

Probabilistic Seismic Performance Assessment of Tall RC Special Moment-resisting Frame Buildings Equipped with Buckling-restrained Braces under Near-field Excitations

Seismic collapse fragility analysis of steel moment-resisting frames (MRFs) with stiffness and strength deterioration considering the spectral shape of ground motion records

Vertical Geometric Irregularity Effect on Performance-Based Seismic Design for Moderate Rise RC Moment Resisting Frame Buildings

Instrumental Assessment of the Predictive Capability of Nonlinear Static Analysis Procedures for Seismic Evaluation of Buildings

Modeling and Response Prediction in Performance-Based Seismic Evaluation: Case Studies of Instrumented Steel Moment-Frame Buildings

Performance-based versus conventional seismic design: comparative assessment on a 4-story RC moment frame

Fragility-Based Performance Evaluation of Asymmetric Single-Story Buildings in Near Field and Far Field Earthquakes

Assessment of modal pushover analysis for mid-rise concrete buildings with and without viscous dampers

Performance‐Based Seismic Design With Consideration of Safe Storage From Errors in Reinforced Concrete Member Estimated Yield Deformation

Evaluation of Modal and Traditional Pushover Analyses in Frame-Shear-Wall Structures

A pushover seismic analysis method for asymmetric and tall buildings

Performance Comparisons of Seismic Assessment Methods with PSD Test Results of a Deficient RC Frame

Comparative Assessment of Performance-Based Design Methodologies Applied to a R.C. Shear-Wall Building

Seismic performance assessment of conventional construction concrete moment-resisting frame buildings in Canada using the FEMA P695 methodology

Seismic demand assessment of code-designed continuity plate in panel zone

Evaluation of Modal and FEMA Pushover Analyses: SAC Buildings

Incremental dynamic analysis and FEMA P695 seismic performance evaluation of a cold‐formed steel–framed building with gravity framing and architectural sheathing

Seismic performance factors of quarter-elliptic-braced steel moment frames (QEB-MFs) using FEMA P695 methodology

A modal nonlinear static analysis method for assessment of structures under blast loading

Review on Recent developments in the performance-based seismic design of reinforced concrete structures