Thermal performance of double-layer pipe-embedded envelope with low-grade energy for heating

Sihang Jiang,Fuhai Zha,Yaxin Zhao,Xianting Li

DOI: https://doi.org/10.1016/j.jobe.2023.107489

IF: 7.144

2023-08-06

Journal of Building Engineering

Abstract:Heat dissipation through a non-transparent envelope contributes significantly to the heating load during winter. The traditional single-layer pipe-embedded external wall (SPEW) can utilize low-grade energy to reduce the heat transfer through the envelope but can hardly be used for direct room heating. This study proposes a double-layer pipe-embedded external wall (DPEW) to utilize low-temperature hot water to reduce heat loss and provide indoor heating in winter. A numerical model of DPEW is developed to analyze its heat transfer performance. After experimental validations, the model is used to investigate the heat transfer performance of DPEW with different water temperatures, ambient temperatures, and envelope structures. The results show that (1) for the outer pipes of DPEW, water with a temperature lower than the room temperature (e.g., 12 °C) can be employed to reduce heat loss through the wall; for inner pipes of DPEW, water with a temperature slightly higher than the room temperature (e.g., 22 °C) can be employed for direct room heating; (2) the insulation layer thickness of the DPEW can be reduced to be significantly smaller than that of a conventional wall; an insulation layer between the two layers of embedded pipes is necessary to reduce heat transfer between water pipes; (3) the effect of water temperature on the heating capacity of DPEW is more significant than that of ambient temperature; increasing the pipe diameter and decreasing the pipe spacing can improve the heating capacity of DPEW.

construction & building technology,engineering, civil