Phase‐Change and Ovonic Materials (Fourth Edition)

Pierre Noé,Bart J. Kooi,Matthias Wuttig

DOI: https://doi.org/10.1002/pssr.202300129

2023-08-05

physica status solidi (RRL) - Rapid Research Letters

Abstract:physica status solidi (RRL) – Rapid Research Letters, Volume 17, Issue 8, August 2023.

physics, condensed matter, applied,materials science, multidisciplinary

What problem does this paper attempt to address?

Phase‐Change and Ovonic Materials (fifth edition)

Pierre Noé,Bart J. Kooi,Matthias Wuttig

DOI: https://doi.org/10.1002/pssr.202400239

2024-10-06

physica status solidi (RRL) - Rapid Research Letters

Abstract:physica status solidi (RRL) – Rapid Research Letters, Volume 18, Issue 10, October 2024.

physics, condensed matter, applied,materials science, multidisciplinary
Phase Transitions and Anti-Ferroelectric Behaviors in Hf1-xZrxO2 Films

Zeping Weng,Liang Zhao,Choonghyun Lee,Yi Zhao

DOI: https://doi.org/10.1109/led.2023.3311316

IF: 4.8157

2023-01-01

IEEE Electron Device Letters

Abstract:In this letter, we systematically studied the relationship between ferroelectricity/anti-ferroelectricity and the corresponding phase structures in Hf1-xZrxO2 (HZO) films. Our findings, obtained through ab initio simulations, indicate that the orthorhombic-I phase exhibits greater stability compared to the orthorhombic-III and tetragonal phases in the HZO system. Atomic-resolution C s-corrected scanning transmission electron microscopy revealed a direct correlation between anti-ferroelectricity and orthorhombic-I phase in HZO materials. Furthermore, the reversible transition between the tetragonal and orthorhombic-I phases has been identified as a contributing factor to the anti-ferroelectric properties observed in thin HZO films. The development of phase-engineered AFE HZO, as demonstrated in this work, holds significant promise for advanced embedded DRAM and non-volatile memory applications.
Phase transitions and ferroelectrics: revival and the future in the field

J.Kreisel,B.Noheda,B.Dkhil

DOI: https://doi.org/10.1080/01411590903335249

2009-09-14

Abstract:It appeared worthwhile to us to present a state-of-the-art look at the field of ferroelectrics. We are certainly not attempting to provide a complete review of all aspects of the field of ferroelectrics over the last years but we wish to transport a flavour of the current excitement in the field through the (subjective) choice of four specific examples of current interest: (i) Piezoelectrics and the morphotropic phase boundary, (ii) Multiferroics, (iii) The effect of high pressure on ferroelectrics and (iv) Strain-engineering in ferroelectric oxide thin films. For each topic we will try to work out both current interesting approaches and an outlook into future challenges. Throughout our discussion, the reader is referred to a list of significant review articles, books and papers in the field.

Materials Science
Phase transitions and Raman effect in from first principles

Sohm Apte and Alexander A. Demkov

DOI: https://doi.org/10.1103/physrevmaterials.8.116202

IF: 3.98

2024-11-05

Physical Review Materials

Abstract:Erbium oxide ( ) is a rare earth sesquioxide with possible applications in CMOS as a gate dielectric, in photovoltaics, and in scalable optical quantum computing technology. Further, erbium exhibits photoluminescence in the telecom band at $1540\phantom... [Phys. Rev. Materials 8, 116202] Published Mon Nov 04, 2024

materials science, multidisciplinary
Unraveling Crystallization Mechanisms and Electronic Structure of Phase‐Change Materials by Large‐Scale Ab Initio Simulations (Adv. Mater. 11/2022)

Yazhi Xu,Yuxing Zhou,Xu‐Dong Wang,Wei Zhang,En Ma,Volker L. Deringer,Riccardo Mazzarello

DOI: https://doi.org/10.1002/adma.202270084

IF: 29.4

2022-03-01

Advanced Materials

Abstract:Advanced Materials, Volume 34, Issue 11, March 17, 2022.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Thermodynamic and Phase-Field Studies of Phase Transitions, Domain Structures, and Switching for Ba(Zr Ti1−)O3 Solid Solutions

Yu Hui Huang,Jian-Jun Wang,Tian Nan Yang,Xiao Xing Cheng,Bing Liu,Yong Jun Wu,Long-Qing Chen

DOI: https://doi.org/10.1016/j.actamat.2020.01.019

IF: 9.4

2020-01-01

Acta Materialia

Abstract:While extensive experimental activities have been carried out to study the phase transitions and ferroelectric properties of BaZrxTi1-xO3 solid solutions, the corresponding theoretical understanding is largely lacking due to the unavailability of thermodynamic potentials for this system. In this work, an eighth-order polynomial of thermodynamic potential for BaZrxTi1-xO3 (x <= 0.3) solid solutions is established based on the existing potential coefficients of BaTiO3 and theexperimentally measured phase diagram of BaZrxTi1-xO3 solid solutions. It is then employed to predict and understand the domain structures and switching for BaZrxTi1-xO3 (x <= 0.3) single crystals using phase-field simulations. The simulated domain structures and switching are consistent with thermodynamic analysis and available experimental measurements, validating the established thermodynamic potential. It is expected that this thermodynamic potential will find wide applications to studying the phase transitions and ferroelectric properties of BaZrxTi1-xO3 (x <= 0.3) bulk and nanoscale materials. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Reversible Thermally Driven Phase Change of Layered In2Se3 for Integrated Photonics.

Jianghong Wu,Yuting Ye,Jialing Jian,Xiaoping Yao,Junying Li,Bo Tang,Hui Ma,Maoliang Wei,Wenbin Li,Hongtao Lin,Lan Li

DOI: https://doi.org/10.1021/acs.nanolett.3c01247

IF: 10.8

2023-01-01

Nano Letters

Abstract:Two-dimensional In2Se3, an unconventional phase-change material, has drawn considerable attention for polymorphic phase transitions and electronic device applications. However, its reversible thermally driven phase transitions and potential use in photonic devices have yet to be explored. In this study, we observe the thermally driven reversible phase transitions between α and β' phases with the assistance of local strain from surface wrinkles and ripples, as well as reversible phase changes within the β phase family. These transitions lead to changes in the refractive index and other optoelectronic properties with minimal optical loss at telecommunication bands, which are crucial in integrated photonic applications such as postfabrication phase trimming. Additionally, multilayer β'-In2Se3 working as a transparent microheater proves to be a viable option for efficient thermo-optic modulation. This prototype design for layered In2Se3 offers immense potential for integrated photonics and paves the way for multilevel, nonvolatile optical memory applications.
Phase Stability, Phase Transformations, and Reactive Phase Formation

Sinn-wen Chen

DOI: https://doi.org/10.1007/s11837-009-0012-z

2009-01-01

JOM

Abstract:This special topic in JOM, Phase Stability, Phase Transformations, and Reactive Phase Formation, is sponsored by the Alloy Phases Committee and presents fi ve articles. In the fi rst paper, K. Suganuma and coworkers, from Osaka University, Japan, give a comprehensive overview of high-temperature lead-free solders including their properties and phase formation. High-temperature, lead-free soldering is a key technology for electronics components and assemblies, and requires a high level of process control. The interconnections must withstand temperatures beyond 250oC for a short period and offer high reliability against thermal cycling as well as good heat dissipation. Therefore, a robust design concept is needed based on materials science in order to obtain the new technology. Y.-C. Wu et al., from National Tsing Hua University, Taiwan, study phase ordering transformation of L1 0 ordered FePt fi lm by controlling stress and diffusion. The ordering process of a disordered FePt is controlled by a kinetic process. The paper proposes several ways to accelerate phase transformation at low temperature. An extra driving force for diffusion was provided by ion irradiation or dynamic stress; the diffusion length was diminished by using atomic-scale multilayer deposition. In addition, the novel sputtering scheme, atomic-scale multilayer deposition, can effectively promote the (001) texture of L1 0 FePt grown on amorphous substrates without any underlayer J.P. Chu from National Taiwan University of Science and Technology, Taiwan, reports an interesting phase transformation phenomenon, annealing-induced amorphization in a copper-based (Cu 51 Zr 42 Al 4 Ti 3 ) glass-forming thin fi lm. Chu found that upon annealing in the supercooled liquid region, a fully amorphous structure is developed and this leads to a softening this study, suffer from lower toughness caused by secondary phase precipitation especially when these steels undergo thermal treatments. In this study the infl uence of thermal treatment parameters on the precipitation of these secondary phases was investigated. A phase is a homogeneous region of matter and is the building block of materials. Different spatial arrangements of molecules lead to different phases and result in different materials properties. These fi ve articles clearly indicate that “phases” are important for all kinds of materials including structural materials, magnetic materials, glasses, and electronic materials. It can be noticed as well that the contributors are from different regions of the world. As one of the oldest committees in TMS, the Alloy Phases Committee clearly indicates the very early awareness of the importance of “phase” in material studies by the TMS members. The Alloy Phases Committee has also sponsored a Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials symposium at the TMS Annual Meeting for eight consecutive years. In the foreword of the January 2009 Journal of Electronic Materials special issue, it is mentioned that the internationalized “phase” ( , , фаза, fase, faza) is the key word. The same globalized spirit should be shared. Although it might not necessarily get hotter and more crowded, the world of materials science has undoubtedly become more fl attened, and global cooperation will be the key for the future.
Phase-change materials: The view from the liquid phase and the metallicity parameter

Shuai Wei,Pierre Lucas,C. Austen Angell

DOI: https://doi.org/10.1557/mrs.2019.207

IF: 5

2019-09-01

MRS Bulletin

Abstract:Abstract

materials science, multidisciplinary,physics, applied
Monatomic Phase-Change Switch

Xu-Dong Wang,Wei Zhang,En Ma

DOI: https://doi.org/10.1016/j.scib.2022.01.020

IF: 18.9

2022-01-01

Science Bulletin

Abstract:In the 1960s,Stanford Ovshinsky pioneered electrically con-trolled ovonic threshold switching(OTS)and ovonic memory switching(OMS),using amorphous chalcogenide materials[1].As sketched in Fig.1a,under small externally applied voltage bias the"amorphous OFF"state allows only a low electric current,thanks to the highly resistive nature of the glassy material.
Deciphering the Phase Transition-Induced Ultrahigh Piezoresponse in (K,na)nbo3-Based Piezoceramics.

Mao-Hua Zhang,Chen Shen,Changhao Zhao,Mian Dai,Fang-Zhou Yao,Bo Wu,Jian Ma,Hu Nan,Dawei Wang,Qibin Yuan,Lucas Lemos da Silva,Lovro Fulanović,Alexander Schökel,Peitao Liu,Hongbin Zhang,Jing-Feng Li,Nan Zhang,Ke Wang,Jürgen Rödel,Manuel Hinterstein

DOI: https://doi.org/10.1038/s41467-022-31158-x

IF: 16.6

2022-01-01

Nature Communications

Abstract:Here, we introduce phase change mechanisms in lead-free piezoceramics as a strategy to utilize attendant volume change for harvesting large electrostrain. In the newly developed (K,Na)NbO3 solid-solution at the polymorphic phase boundary we combine atomic mapping of the local polar vector with in situ synchrotron X-ray diffraction and density functional theory to uncover the phase change and interpret its underlying nature. We demonstrate that an electric field-induced phase transition between orthorhombic and tetragonal phases triggers a dramatic volume change and contributes to a huge effective piezoelectric coefficient of 1250 pm V-1 along specific crystallographic directions. The existence of the phase transition is validated by a significant volume change evidenced by the simultaneous recording of macroscopic longitudinal and transverse strain. The principle of using phase transition to promote electrostrain provides broader design flexibility in the development of high-performance piezoelectric materials and opens the door for the discovery of high-performance future functional oxides.
An Interesting Functional Phase Change Material VO2: Response to Multivariate Control and Extensive Applications in Optics and Electronics

Yu Liu,Anqi Liu,Xiaomei Chai,Yi Yang,Min Lu,Xu Bai,Yongyi Chen,Yu Zhang

DOI: https://doi.org/10.1002/aelm.202300699

IF: 6.2

2023-12-19

Advanced Electronic Materials

Abstract:VO2 is a classical strongly correlated material. At TC = 68 °C, the insulator‐metal phase transition occurs, and with the structural transition from monoclinic to tetragonal rutile phase, the optical and electrical properties have undergone tremendous changes. The phase transition can respond to a variety of external excitations, such as thermal, electric, light, strain and magnetic. The magical changes in physical properties and multiple stimulus response characteristics make VO2 have application potential in the field of optical and electrical devices. At present, it is widely used in the fields of optical/electrical switch components, neural networks, mechanical structures and smart windows. Under physical conditions such as TC = 68 °C, Vanadium dioxide (VO2) undergoes a reversible transformation from a monoclinic phase to a tetragonal rutile phase. This transformation is accompanied by a series of changes in physical properties, including transmittance, conductivity, and refractive index, which make it an excellent functional material. Based on this, VO2 has been extensively researched and applied in the fields of electronics and optics, yielding remarkable results and making it a hot research material. This paper reviews the phase transition mechanisms and optical/electrical properties of VO2, as well as its phase transition hysteresis. From the application perspective, this paper summarizes the modulation content under various external excitations and the element doping effects. Finally, this paper summarizes the classic VO2‐based devices, and points out the development direction and potential of VO2 in optics and electronics. This review provides a systematic summary of VO2, which is useful for its practical applications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Femtosecond x-ray diffraction reveals a liquid–liquid phase transition in phase-change materials

Peter Zalden,Florian Quirin,Mathias Schumacher,Jan Siegel,Shuai Wei,Azize Koc,Matthieu Nicoul,Mariano Trigo,Pererik Andreasson,Henrik Enquist,Michael J Shu,Tommaso Pardini,Matthieu Chollet,Diling Zhu,Henrik Lemke,Ider Ronneberger,Jörgen Larsson,Aaron M Lindenberg,Henry E Fischer,Stefan Hau-Riege,David A Reis,Riccardo Mazzarello,Matthias Wuttig,Klaus Sokolowski-Tinten,Michael J. Shu,Aaron M. Lindenberg,Henry E. Fischer,David A. Reis

DOI: https://doi.org/10.1126/science.aaw1773

IF: 56.9

2019-06-14

Science

Abstract:Structural switch for fast switching Phase-change materials are important for computer memory. They can quickly switch from glassy to crystalline using a thermal pulse and then lock in that structure for a long time at lower temperature. Zalden et al. probed the underlying atomic structure of two phase-change materials during this switching using ultrafast x-rays and simulations (see the Perspective by Rao et al. ). A liquid-liquid phase transition in both materials allowed fast switching at high temperatures. The lower-temperature glass locks in the structure, allowing for long-term memory storage. Science , this issue p. 1062 ; see also p. 1032

multidisciplinary sciences
Stimuli-Responsive Phase Change Materials: Optical and Optoelectronic Applications

Irene Vassalini,Ivano Alessandri,Domenico de Ceglia

DOI: https://doi.org/10.3390/ma14123396

IF: 3.4

2021-06-19

Materials

Abstract:Stimuli-responsive materials offer a large variety of possibilities in fabrication of solid- state devices. Phase change materials (PCMs) undergo rapid and drastic changes of their optical properties upon switching from one crystallographic phase to another one. This peculiarity makes PCMs ideal candidates for a number of applications including sensors, active displays, photonic volatile and non-volatile memories for information storage and computer science and optoelectronic devices. This review analyzes different examples of PCMs, in particular germanium–antimonium tellurides and vanadium dioxide (VO2) and their applications in the above-mentioned fields, with a detailed discussion on potential, limitations and challenges.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
On the Phase Transitions That Cannot Materialize

Yuri Mnyukh

DOI: https://doi.org/10.48550/arXiv.1310.5009

2013-12-25

Abstract:The succession of suggested mechanisms of solid-state phase transitions - Second-order, Lambda, Martensitic, Displacive, Topological, Order-Disorder, Soft-mode, Incommensurate, Scaling and Quantum - are analyzed and explained why they cannot be realized in nature. All of them assume a cooperative structural rearrangement as opposed to the only real one which is simply a variant of the crystal growth. Like all kinds of crystal growth, a solid state phase transition proceeds by molecule-by-molecule building building the crystal of a different structure, while the surrounding original crystal is used as the building material.

Materials Science
Monatomic phase change memory

Martin Salinga,Benedikt Kersting,Ider Ronneberger,Vara Prasad Jonnalagadda,Xuan Thang Vu,Manuel Le Gallo,Iason Giannopoulos,Oana Cojocaru-Mirédin,Riccardo Mazzarello,Abu Sebastian

DOI: https://doi.org/10.1038/s41563-018-0110-9

2019-02-01

Abstract:Phase change memory has been developed into a mature technology capable of storing information in a fast and non-volatile way, with potential for neuromorphic computing applications. However, its future impact in electronics depends crucially on how the materials at the core of this technology adapt to the requirements arising from continued scaling towards higher device densities. A common strategy to finetune the properties of phase change memory materials, reaching reasonable thermal stability in optical data storage, relies on mixing precise amounts of different dopants, resulting often in quaternary or even more complicated compounds. Here we show how the simplest material imaginable, a single element (in this case, antimony), can become a valid alternative when confined in extremely small volumes. This compositional simplification eliminates problems related to unwanted deviations from the optimized stoichiometry in the switching volume, which become increasingly pressing when devices are aggressively miniaturized. Removing compositional optimization issues may allow one to capitalize on nanosize effects in information storage.

Applied Physics
Surface Chemical-Modification of Inorganic Solids for Engineering the Phase Transitions and Smart Applications

Zejun Li,Yingcheng Zhao,Changzheng Wu

DOI: https://doi.org/10.1360/n032018-00025

2018-01-01

Scientia Sinica Chimica

Abstract:The electron-electron correlation in low-dimensional inorganic solid materials leads to many novel phase transition behaviors, such as metal-insulator transition, superconductivity, charge density wave and giant magnetoresistance effect, etc. Adjusting parameters by external fields can change the equilibrium relationship between ordered phases, realize the phase transition between different competing phases, and induce new physical properties and even new quantum critical phenomena. These phase-transition materials have great potential to be used in advanced electronic components and smart response devices in the future. It is known that low-dimensional inorganic phase-transition solids have large specific surface area and electronic correlation effects. Surface chemical modification opens up a new research space for the regulation of their phase transitions and complex interactions, which is not only helpful to explore physical laws and new quantum orders of low-dimensional correlated electron systems, but also of great significance to understand the microscopic origin of these complex physical phenomena. In this review, we focus on a series of recent advances about the regulation of phase transitions of low-dimensional inorganic solids by surface chemical modification strategies, and investigate their smart response to external light and magnetism under the limited dimension.
Phase Change February [From the Editor’s Desk]

Robert H. Caverly

DOI: https://doi.org/10.1109/mmm.2023.3336508

IF: 3.0619

2024-02-01

IEEE Microwave Magazine

Abstract:Since the early days of electrical energy sources (from equipment such as Leyden jars by von Kleist and van Musschenbroek and Otto von Guerickes electrostatic generator [1]), there has always been a need to disconnect the energy source from its load. In the early days, this was a manual operation and most likely involved simply cutting or removing the wires from the source. As the early electrical engineers ingenuity prevailed, however, mechanical, and then electromechanical, control devices were invented, with the subsequent new applications that came from those. Fast forward to later years, and vacuum tubes (or valves), then solid-state control devices operated by voltages, currents, or photons, and then finally MEMS control devices were invented, with new applications being created that literally span the spectrum of dc to daylight. Recently, a new switching technique has been advanced using so-called phase change materials, which go from a high-impedance state to a low-impedance state by the application (or removal) of heat. I have been interested in solid-state control devices for many years, and so I was intrigued when Tejinder Singh and Pierre Blondy of the IEEE Microwave Theory and Technology Society (MTT-S) Technical Committee 6 (TC-6) on RF MEMS and Microwave Acoustics contacted me to organize this months focus issue on control devices using these phase change materials. Tejinder and Pierre have selected three articles on phase change materials, and I encourage you to start your reading of the focus issue papers with their Guest Editorial column where they introduce the articles and provide a little background on TC-6. I would like to thank Tejinder and Pierre not only for organizing the issue but also serving as authors on two of the three focus issue features. I know you will find this months focus on phase change material devices interesting. We also have a fourth paper to round out the technical portion of the issue written by Dipankar Shakya et al. [A1] where the authors describe a facility that is open to all.

telecommunications,engineering, electrical & electronic
Publisher's Note: Phonon Instability and Pressure-Induced Isostructural Semiconductor-Semimetal Transition of Monoclinic VO 2 [phys. Rev. B 94, 205127 (2016)]

Huabing He,Heng Gao,Wei Wu,Shixun Cao,Jiawang Hong,Dehong Yu,Guochu Deng,Yanfeng Gao,Peihong Zhang,Hongjie Luo,Wei Ren

DOI: https://doi.org/10.1103/physrevb.95.079901

2017-01-01

Abstract:Received 31 January 2017DOI:https://doi.org/10.1103/PhysRevB.95.079901©2017 American Physical SocietyPhysics Subject Headings (PhySH)Research AreasBand gapPhase transitionsPressure effectsSemiconductorsPhysical SystemsCrystal structuresElectronic structurePeierls transitionStrongly correlated systemsTechniquesBand structure methodsDensity functional theoryCondensed Matter, Materials & Applied Physics
Phase Properties of Different HfO2 Polymorphs: A DFT-Based Study

Emiliano Laudadio,Pierluigi Stipa,Luca Pierantoni,Davide Mencarelli

DOI: https://doi.org/10.3390/cryst12010090

IF: 2.7

2022-01-10

Crystals

Abstract:Background: Hafnium Dioxide (HfO2) represents a hopeful material for gate dielectric thin films in the field of semiconductor integrated circuits. For HfO2, several crystal structures are possible, with different properties which can be difficult to describe in detail from an experimental point of view. In this study, a detailed computational approach has been shown to present a complete analysis of four HfO2 polymorphs, outlining the intrinsic properties of each phase on the basis of atomistic displacements. Methods: Density functional theory (DFT) based methods have been used to accurately describe the chemical physical properties of the polymorphs. Corrective Hubbard (U) semi-empirical terms have been added to exchange correlation energy in order to better reproduce the excited-state properties of HfO2 polymorphs. Results: the monoclinic phase resulted in the lowest cohesive energy, while the orthorhombic showed peculiar properties due to its intrinsic ferroelectric behavior. DFT + U methods showed the different responses of the four polymorphs to an applied field, and the orthorhombic phase was the least likely to undergo point defects as oxygen vacancies. Conclusions: The obtained results give a deeper insight into the differences in excited states phenomena in relation to each specific HfO2 polymorph.

materials science, multidisciplinary,crystallography

Phase‐Change and Ovonic Materials (Fourth Edition)

Phase‐Change and Ovonic Materials (fifth edition)

Phase Transitions and Anti-Ferroelectric Behaviors in Hf1-xZrxO2 Films

Phase transitions and ferroelectrics: revival and the future in the field

Phase transitions and Raman effect in from first principles

Unraveling Crystallization Mechanisms and Electronic Structure of Phase‐Change Materials by Large‐Scale Ab Initio Simulations (Adv. Mater. 11/2022)

Thermodynamic and Phase-Field Studies of Phase Transitions, Domain Structures, and Switching for Ba(Zr Ti1−)O3 Solid Solutions

Reversible Thermally Driven Phase Change of Layered In2Se3 for Integrated Photonics.

Phase Stability, Phase Transformations, and Reactive Phase Formation

Phase-change materials: The view from the liquid phase and the metallicity parameter

Monatomic Phase-Change Switch

Deciphering the Phase Transition-Induced Ultrahigh Piezoresponse in (K,na)nbo3-Based Piezoceramics.

An Interesting Functional Phase Change Material VO2: Response to Multivariate Control and Extensive Applications in Optics and Electronics

Femtosecond x-ray diffraction reveals a liquid–liquid phase transition in phase-change materials

Stimuli-Responsive Phase Change Materials: Optical and Optoelectronic Applications

On the Phase Transitions That Cannot Materialize

Monatomic phase change memory

Surface Chemical-Modification of Inorganic Solids for Engineering the Phase Transitions and Smart Applications

Phase Change February [From the Editor’s Desk]

Publisher's Note: Phonon Instability and Pressure-Induced Isostructural Semiconductor-Semimetal Transition of Monoclinic VO 2 [phys. Rev. B 94, 205127 (2016)]

Phase Properties of Different HfO2 Polymorphs: A DFT-Based Study