Abstract:Nanocomposite permanent magnets can achieve excellent magnetic properties due to the hardening of a soft phase by hard phase within the length of exchange coupling. The performance of exchange coupling nano-composite magnets can be optimized through the design of appropriate microstructure by micromagnetic modeling. In this study, we performed a micromagnetic simulation for isotropic exchange coupling nano-composite Nd2Fe14B/alpha-Fe permanent magnet in which grain sizes and volume fractions of magnetically hard Nd2Fe14B phase and soft alpha-Fe phase vary independently, ranging in grain size from 5 nm to 40 nm and in the volume fraction of alpha-Fe from 10% to 60%. When the grain size of the hard phase is 5 nm, and that of the soft phase is 10 nm, respectively, with the volume fraction of the soft phase of 30%, the highest (BH)(max) of 197 kJ/m(3) can be reached. Furthermore, considering the effects of the grain sizes of the hard and soft phases, we suggest that the grain size of the hard phase plays a more critical role in enhancing maximum energy product (BH)(max). The micromagnetic modeling with the variation of grain size and volume faction has been performed with a grain boundary (GB) phase. It was found that when the thickness of the GB phase is very small (similar to 1nm), there is little difference between the simulated results with the GB phase and without GB phase. On the other hand, the coercivities and (BH)(max) decrease significantly due to the increase of soft phase when the thickness of GB phase is 5 nm.

Microstructure and Magnetic Properties of Copper Mold Cast Nd‐Fe‐B Magnets Investigated by Phase‐field and Micromagnetic Simulations

Changes of microstructure and magnetic properties of Nd–Fe–B sintered magnets by doping Al–Cu

Mechanical properties and microstructure of Nd-Fe-B magnet diffused by low melting point alloys

The magnetic, structure and mechanical properties of rapidly solidified (Nd7Y2.5)–(Fe64.5Nb3)–B23 nanocomposite permanent magnet

Understanding the role of Cu element in nanocrystalline hot deformed Nd-Fe-B magnets

Microstructure and Phase Evolution Mechanism in Hot-pressed and Hot-deformed Nd-Fe-B Magnets with Nd85Cu15 Addition

Microstructure and Phase Evolution Mechanism in Hot-pressed and Hot-deformed Nd-Fe-B Magnets with Nd<sub>85</sub>Cu<sub>15</sub> Addition

Synthesis, Structural and Magnetic Properties of the Nanocomposite Fe63B23Nd7Y3Nb3Cr1 Magnets

Magnetic Properties Evolution with Grain Boundary Phase Transformation and Their Growth in Nd-Fe-Cu-Ga-B Sintered Magnet During Post-Sinter Annealing Process

Effect of Nd-Co on microstructure and magnetic properties of Nd-Ce-Y-Fe-B sintered magnets

Effect of post-sintering annealing on microstructure and coercivity of Al85Cu15-added NdFeB sintered magnets

Magnetic properties of Nd6Fe13Cu single crystals

Effect of microstructure on magnetic properties of Nd-Fe-B permanent magnet

Micromagnetic study for optimum performance of isotropic Nd<sub>2</sub>Fe<sub>14</sub>B/α-Fe nanocomposite bulk magnets

Micromagnetic study for optimum performance of isotropic Nd<sub>2</sub>Fe<sub>14</sub>B/-Fe nanocomposite bulk magnets

Coercivity Enhancement of Low Rare Earth Nd–Fe–B Sintered Magnets by Optimizing Microstructure

Nanoscale Structure and Magnetic Properties of Nd-Fe-nb-b-c Permanent Magnets

Microstructure and Magnetic Properties in Mn-doped Nd–Fe–B Magnets

Effect of Nb Doping on Microstructure and Magnetic Properties of Hot-Deformed Nd-Fe-B Magnets with Nd-Cu Eutectic Diffusion

Effect of Cu and Cu–Ti additions on the microstructures and magnetic properties of Nd2Fe14B–α-Fe nanocomposite magnets

Micromagnetic Simulation for Optimizing Nanocomposite Nd2Fe14B/α-Fe Permanent Magnets by Changing Grain Size and Volume Fraction