Abstract:A new technology to the pharmaceutical field is presented: surface decontamination by plasmas The technology is comparable to established barrier systems like e-beam, volatile hydrogen peroxide, or radiation inactivation of microbiological contaminations. This plasma technology is part of a fully automated and validated syringe filling line at a major pharmaceutical company and is in production operation. Incoming pre-sterilized syringe containers ("tubs") are processed by plasma, solely on the outside, and passed into the aseptic filling isolator upon successful decontamination. The objective of this article is to present the operating principles and develop and establish a validation routine on the basis of standard commercial biological indicators. Their decontamination efficacies are determined and correlated to the actual inactivation efficacy on the pharmaceutical packaging material.The reference setup is explained in detail and a short presentation of the cycle development and the relevant plasma control parameters is given, with a special focus on the in-process monitor determining the cycle validity. Different microbial inactivation mechanisms are also discussed and evaluated for their contribution and interaction to enhance plasma decontamination. A material-dependent inactivation behavior was observed. In order to be able to correlate the tub surface inactivation of Geobacillus stearothermophilus endospores to metallic biological indicators, a comparative study was performed. Through consistently demonstrating the linear inactivation behavior between the different materials, it becomes possible to develop an effective and time-saving validation scheme. Lay abstract: The challenge in new decontamination systems lies in a thorough validation of the inactivation efficacy under different operating regimes. With plasma, as an ionized gas, a new barrier concept is introduced into pharmaceutical aseptic processing of syringes. The presented system operates in vacuum and only decontaminates the outer surface of pre-sterilized syringe containers ("tubs"), before they are transferred into the aseptic area. The plasma does not penetrate into the tub. This article discusses the phase from development and test germ selection, across the identified sporicidal mechanisms, to a proposal for a validation scheme on the basis of commercially available biological indicators. A special focus is placed on an extensive investigation to establish a link between the tub surface microbial kill (polystyrene and Tyvek(and (2)) ) and biological indicator inactivation (stainless steel). Additionally, a rationale is developed on how an optical in-process monitor can be applied to establish a validatable limit on the base of the predetermined inactivation data of Geobacillus stearothermophilus endospores.

Assessment of the efficacy of a low temperature hydrogen peroxide gas plasma sterilization system

Cost analysis of three low-temperature sterilization systems at Saint Barnabas Medical Center

Comparison of Ion Plasma, Vaporized Hydrogen Peroxide, and 100% Ethylene Oxide Sterilizers to the 12/88 Ethylene Oxide Gas Sterilizer

Bactericidal effects of nonthermal low-pressure oxygen plasma on S. typhimurium LT2 attached to fresh produce surfaces

Challenging the Sterrad 100NX sterilizer with different carrier materials and wrappings under experimental "clean" and "dirty" conditions

Evaluation of pyrogens remaining on reusable medical devices after washing and sterilization

Comparative evaluation of the microbicidal activity of low-temperature sterilization technologies to steam sterilization

[Low Temperature Oxygen Plasma Sterilization Effect on Pseudomonas Aeruginosa].

1419. Evaluation of a vaporized hydrogen peroxide sterilization technology for duodenoscopes

Sterilization of Bacteria with Low-Pressure Low-Temperature Plasma Discharge

Terminal sterilization of medical devices using vaporized hydrogen peroxide: a review of current methods and emerging opportunities

Plasma Decontamination: A Case Study on Kill Efficacy of Geobacillus stearothermophilus Spores on Different Carrier Materials

New sterilisation technologies--are they applicable for endoscopic surgical instruments?

Analysis of sterilization efficiency and application cost of three low temperature sterilization methods

Recent Advances in Prion Inactivation by Plasma Sterilizer

Costs of low-temperature plasma sterilization compared with other sterilization methods

Non-traditional sterilization techniques for biomaterials and medical devices

OBSERVATION ON STERILIZATION EFFICACY OF HYDROGEN PEROXIDE VAPOR IN BIOSAFETY LABORATORY

Low temperature air plasma sterilization on Pseudomonas aeruginosa

Low-Temperature Sterilization by Atmospheric Pressure Plasma Jet

Contamination of bronchoscopes with Mycobacterium tuberculosis and successful sterilization by low-temperature hydrogen peroxide plasma sterilization