Abstract:A new technology to the pharmaceutical field is presented: surface decontamination by plasmas The technology is comparable to established barrier systems like e-beam, volatile hydrogen peroxide, or radiation inactivation of microbiological contaminations. This plasma technology is part of a fully automated and validated syringe filling line at a major pharmaceutical company and is in production operation. Incoming pre-sterilized syringe containers ("tubs") are processed by plasma, solely on the outside, and passed into the aseptic filling isolator upon successful decontamination. The objective of this article is to present the operating principles and develop and establish a validation routine on the basis of standard commercial biological indicators. Their decontamination efficacies are determined and correlated to the actual inactivation efficacy on the pharmaceutical packaging material.The reference setup is explained in detail and a short presentation of the cycle development and the relevant plasma control parameters is given, with a special focus on the in-process monitor determining the cycle validity. Different microbial inactivation mechanisms are also discussed and evaluated for their contribution and interaction to enhance plasma decontamination. A material-dependent inactivation behavior was observed. In order to be able to correlate the tub surface inactivation of Geobacillus stearothermophilus endospores to metallic biological indicators, a comparative study was performed. Through consistently demonstrating the linear inactivation behavior between the different materials, it becomes possible to develop an effective and time-saving validation scheme. Lay abstract: The challenge in new decontamination systems lies in a thorough validation of the inactivation efficacy under different operating regimes. With plasma, as an ionized gas, a new barrier concept is introduced into pharmaceutical aseptic processing of syringes. The presented system operates in vacuum and only decontaminates the outer surface of pre-sterilized syringe containers ("tubs"), before they are transferred into the aseptic area. The plasma does not penetrate into the tub. This article discusses the phase from development and test germ selection, across the identified sporicidal mechanisms, to a proposal for a validation scheme on the basis of commercially available biological indicators. A special focus is placed on an extensive investigation to establish a link between the tub surface microbial kill (polystyrene and Tyvek(and (2)) ) and biological indicator inactivation (stainless steel). Additionally, a rationale is developed on how an optical in-process monitor can be applied to establish a validatable limit on the base of the predetermined inactivation data of Geobacillus stearothermophilus endospores.

Challenging the Sterrad 100NX sterilizer with different carrier materials and wrappings under experimental "clean" and "dirty" conditions

Radiation and Ethylene Oxide Terminal Sterilization Experiences with Drug Eluting Stent Products

Comparing Medium Pressure Dielectric Barrier Discharge (DBD) Plasmas and Classic Methods of Surface Cleaning/activation of Pure Mg for Biomedical Applications

Preliminary Results for a New Final Package Test to Assess the Quality of Sterile Package Systems

The Effect of Radiation on a Variety of Pharmaceuticals and Materials Containing Polymers

Assessment of the efficacy of a low temperature hydrogen peroxide gas plasma sterilization system

Plasma Decontamination: A Case Study on Kill Efficacy of Geobacillus stearothermophilus Spores on Different Carrier Materials

Comparison of Ion Plasma, Vaporized Hydrogen Peroxide, and 100% Ethylene Oxide Sterilizers to the 12/88 Ethylene Oxide Gas Sterilizer

Cost analysis of three low-temperature sterilization systems at Saint Barnabas Medical Center

OBSERVATION ON STERILIZATION EFFICACY OF GLUTARALDEHYDE DISINFECTOR ON MEDICAL APPLIANCES AND MEDICAL- CATHETERS

1419. Evaluation of a vaporized hydrogen peroxide sterilization technology for duodenoscopes

Comparative evaluation of the microbicidal activity of low-temperature sterilization technologies to steam sterilization

Evaluation of Sterilisation Techniques for Regenerative Medicine Scaffolds Fabricated with Polyurethane Nonbiodegradable and Bioabsorbable Nanocomposite Materials

The novel sterilization device: the prototype testing

Efficacy of an experimental gaseous ozone-based sterilization method for clear aligners

Compatibility of Polyvinyl Chloride (PVC) Medical Devices and Other Polymeric Materials with Reactive Ion Etching (RIE) and Inductively Couple Plasma (ICP) Sterilization Using a Quality by Design (QbD) Approach

Impact of sterilization treatments on biodegradability and cytocompatibility of zinc-based implant materials

Terminal sterilization of medical devices using vaporized hydrogen peroxide: a review of current methods and emerging opportunities

Characterization of sterilization techniques on a microfluidic oxygen delivery device

Evaluating the Potential, Applicability, and Effectiveness of Ozone Sterilization Process for Medical Devices

Numerical and experimental investigation of the steam penetration in narrow channels during a dynamic steam sterilization cycle