Abstract:The paper presents results of numerical simulations and experimental investigations of a cyclone with a square inlet and different dimensions of a vortex finder. Investigations were conducted for five, different cyclone models. The main goal of the research was to determine the influence of cyclone vortex finder geometry (diameter, length) on key parameters for a cyclone operation, such as: gas flow pattern, gas velocity and pressure distribution, pressure drop and collection efficiency. The analysis of flow pattern inside the cyclone was carried out with the use of CFD (Computational Fluid Dynamics) simulations, verified using CTA (Constant Temperature Anemometry). Similarly, pressure distributions, pressure drop and collection efficiency for cyclones were determined numerically and with measurements. The study demonstrated that dimensions of the vortex finder have a significant effect on a cyclone performance. The numerical visualisations of flow showed some unfavorable and beneficial effects and phenomena that may occur in cyclones. Moreover, the smallest pressure drop (305 Pa) was predicted for the cyclone with a maximum diameter of the vortex finder (De = 0.105 m), the largest (358 Pa) when this diameter was the smallest (De = 0.075 m). The tests did not show any significant influence of the vortex finder length on the pressure drop in a cyclone. A different tendency was observed in the case of collection efficiency. The maximum value of this parameter (89.5%) was predicted for the cyclone with the shortest vortex finder (s = 0.060 m), minimum (85.5%) when the vortex finder was the longest (s = 0.220 m). In this case, however, tests did not show a significant impact of an outlet diameter on the collection efficiency. Results and conclusions presented in this paper can be practically used for design optimization of cyclone separators, and also to select their operating parameters.

Performance analysis of the cyclone separator with a novel clean air inlet installed on the roof surface

Performance Evaluation of a New Micro Gas Cyclone Using Simulation and Experimental Studies to Capture Indoor Fine Particles

Performance analysis of multi-inlet cyclone separators considering different shapes and locations of the inlet ducts

Micro Gas Cyclone Design and Performance Evaluation to Collect Dust Particles

Study of the performance and flow field of a new spiral-roof cyclone separator

Numerical Investigation of Inlet Height and Width Variations on Separation Performance and Pressure Drop of Multi-Inlet Cyclone Separators

Numerical and Experimental Analysis of Flow Pattern, Pressure Drop and Collection Efficiency in a Cyclone with a Square Inlet and Different Dimensions of a Vortex Finder

Numerical simulation of gas-solid flow in a cyclone separator with additional inlet

Performance experiments and pressure drop prediction modelling of an energy-saving cyclone separator

Numerical study of gas-solid flow in a radial-inlet structure cyclone separator

Parametric analysis and optimization of gas-particle flow through axial cyclone separator: A numerical study

Multi-objective optimization of a novel vortex finder for performance improvement of cyclone separator

Performance Analysis of Gas-Liquid Cylindrical Cyclone （GLCC） Separator with an Inclined and Perforated Wall

Numerical Performance Investigation of a Side‐outlet Cyclone for Particulate Matter and Polymer Powder Separation

Effect of inlet periodic velocity on the performance of standard cyclone separators

A study on gas flow in spiral inlet cyclone separator

CFD study on the performance of reducing pressure drop holes in cyclone separator

Effect of Internally Mounted Helical Fins on the Separation Performance of a Cylindrical Gas-Solid Cyclone Separator

Determination of an axial gas cyclone separator cut-off point by CFD numerical modeling

Investigation of Velocity of Square Cyclone with Accelerating Inlet

Numerical simulation of the particle-wall collision strength and swirling effect on the performance of the axial flow cyclone separator