Abstract:Due to the low price and good comprehensive properties, FRP composite material has become a new type of civil application material in recent years. In this paper, Araldite® 2012 adhesive was used to bond basalt-fiber-reinforced polymer (BFRP), and the durability of its bonded joints was investigated. Experiments were carried out at 80 °C/DI water (deionized water), 80 °C/3.5% NaCl solution (3.5% SS), and 80 °C/5.0% NaCl solution (5.0% SS) at 0- (unaged), 10-, 20-, and 30-day aging. The specimen and BFRP in the environment of 80 °C/DI water, 80 °C/3.5% SS, and 80 °C/5.0% SS found salt solution under the condition of all sample water absorption decreases, and the activity of salt solution chemistry was weaker compared with deionized water. The load-displacement curve of the joint failure was obtained through quasi-static tensile experiments, and it was found that the adhesive would undergo a post-curing reaction that had a positive impact on the stiffness of the joint in a high-temperature environment. At the same time, it was found that the joint failure strength decreased less in the salt solution environment, and deionized water was more destructive than the salt solution. Referring to the change in water absorption, it was found that the change in the mechanical properties of the joint was mainly related to the permeation effect of the polymer. The change in the Tg of adhesive was measured by differential scanning calorimetry (DSC). It was found that Tg would decrease after aging, and the change in Tg was mainly related to the mobility of the molecular chain. Thermogravimetric analysis (TGA) was used to analyze the thermal behavior of the epoxy resin and some organic matter, and the main weight loss stage was 340-450 °C, which was the complete degradation of epoxy resin and some organic matter. Macro visual and microscopic scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDX) were used to analyze the failure section, and it can be concluded that the failure mode of joint tear failure transitioned to cohesion in the late-mixed interface failure, at the visible interface between the fiber and the resin matrix.

Corrosion Behavior and Simulation Analysis of Silicate Adhesive under High Temperature and Abrasion-Acid Environment

A Systematic Study on the Failure Behaviors of Aluminum Alloy/composite Bonded Joints Exposed to Various Typical Aging Environments for Automobiles

Durability of Structural Adhesive Exposed to Marine Environment

Research on the Aging Effects of Adhesive and Composites on the Degradation Mechanism of Composite Adhesive Joints in Thermal-Humidity-Cycles for Automobiles

Finite Element Analysis of Adhesive Failure of Solid Composite Propellant Multi-material Structure for Underwater Intelligent Equipment

Experimental Investigation on Microstructure and Surface Morphology Deterioration of Limestone Exposed on Acidic Environment

Degradation of an Underwater Epoxy Adhesive and Its Bonding to Steel Subjected to Water or Seawater Immersion

Insights on the adhesive properties and debonding mechanism of CFRP/concrete interface under sulfate environment: From experiments to molecular dynamics

Effects of water and ions on bonding behavior between epoxy and hydrated calcium silicate: a molecular dynamics simulation study

Influence Mechanism of the Interfacial Water Content on Adhesive Behavior in Calcium Silicate Hydrate−Silicon Dioxide Systems: Molecular Dynamics Simulations

Analytical investigation of hygrothermal effects on failure mechanisms of adhesively bonded corrugated sandwich structures under three-point bending

Study on the Effect of Salt Solution on Durability of Basalt-Fiber-Reinforced Polymer Joints in High-Temperature Environment

Effect of Corrosive Aging Environments on the Flexural Properties of Silane-Coupling-Agent-Modified Basalt-Fiber-Reinforced Composites

Effect of Silane Coupling Agents on the Underfill Adhesion undergoing Heat Aging Test

The Durability of Adhesive/carbon–carbon Composites Joints in Salt Water

Adhesion behaviors and kinetics at silicone foam/metal interfaces

Influence of Chemical Corrosion on Pore Structure and Mechanical Properties of Sandstone

Experimental Study of Effect of Chemical Corrosion on Strength and Deformation of Hard Brittle Limestone

Monitoring of the curing process and thermal failure of Adhesive-Bonded Structures based on damping measurement using quantitative electromechanical impedance

Effects of Hydrolytic Aging on Constitutive Behavior of Silicone Adhesives in Seawater and Distilled Water

The impact of water and oxygen contents on the corrosion performance of yttrium silicate modified SiC f /SiC composites under high temperature conditions