Abstract:The use of micro selective laser melting (μ-SLM) enables product miniaturization, which is one of the megatrends in the metal processing industry and increasingly find its applications in biomedical and electronics industries. Among these, NiTi shape memory alloy (SMA) shows a great promise in functional micro-scaled components such as stent. There are inevitably some imperfections in SLM, but the imperfection formation in μ-SLM may not be the same as that in the conventional SLM. This work studies the imperfections in μ-SLM produced NiTi samples, with focus on defects, microstructure and thermal/mechanical behaviors. The effects of substrate material, laser-related process parameter and scanning strategy on defects such as porosity and cracks were analyzed, and a process window for "Scanning speed – Hatch spacing" was determined. Transformation peak was hardly detected in thermal behavior of as-printed and post heat-treated μ-SLM NiTi, resulting from microstructure inhomogeneity, Ti-rich impurity phases TiC1−xNx/Ti4Ni2Ox and precipitate Ti2Ni, which were introduced by powder preparation, μ-SLM or post heat treatment. The as-printed NiTi shows higher compressive strength and fracture strain than the post heat-treated samples, reaching 2796.57 MPa and 27.80% on average, respectively, but the plateau stress-strain stage is indistinguishable due to inhomogeneous and localized stress-induced martensite transformation. The brittle Ti2Ni phase was introduced in post heat treatment, leading to inhomogeneous microstructure and lower ductility. The underlying mechanisms revealed in these imperfections could serve as a guideline for defect control, process optimization, as well as post heat treatment methods for μ-SLM of NiTi alloy.

Study on corrosion behavior of the selective laser melted NiTi alloy with superior tensile property and shape memory effect

Effect of heat treatment on the microstructure and in-situ corrosion behavior of SLM-NiTi alloys

Corrosion Behavior of NiTi Alloys Fabricate by Selective Laser Melting Subjected to Femtosecond Laser Shock Peening

Analysis of microstructure, mechanical properties, wear characteristics and corrosion behavior of SLM-NiTi under different process parameters

Microstructure, Mechanical Properties and Corrosion Performance of Laser-Welded NiTi Shape Memory Alloy in Simulated Body Fluid

Study on phase transformation behavior and mechanical properties of equiatomic ratio NiTi alloy formed by selective laser melting

Corrosion Behavior of TiNi Alloy Fabricated by Selective Laser Melting in Simulated Saliva

Micro selective laser melting of NiTi shape memory alloy: Defects, microstructures and thermal/mechanical properties

The corrosion resistance and biomineralization of the DCPD-PCL coating on the surface of the additively manufactured NiTi alloy

In vitro evaluation of the biocompatibility and bioactivity of a SLM-fabricated NiTi alloy with superior tensile property

Microstructure and electrochemical corrosion behavior of selective laser melted Ti−6Al−4V alloy in simulated artificial saliva

In vitro corrosion behavior of nano-multilayered TiN/Ti coated NiTi alloy

Effect of heat treatment on the corrosion resistance behavior of selective laser melted Ti6Al4V ELI

Corrosion fatigue behavior of porous Cu-bearing Ti alloy fabricated by selective laser melting

Design and Characterization of Selective Laser‐melted Ti6Al4V–5Cu Alloy for Dental Implants

Study on the junction zone of NiTi shape memory alloy produced by selective laser melting via a stripe scanning strategy

Optimizing laser parameters and exploring building direction dependence of corrosion behavior in NiTi alloys fabricated by laser powder bed fusion

Microstructural evolution and corrosion behavior of Ti–6Al–4V alloy fabricated by laser metal deposition for dental applications

Mechanical Evaluation of Selective Laser Melted Ni-Rich NiTi: Compression, Tension, and Torsion

Factors Influencing the Corrosion Behavior of Direct Metal Laser Sintered Ti-6Al-4V for Biomedical Applications

Influence of Milling–Electrochemical Polishing on Corrosion Resistance of NiTi Shape Memory Alloy