Abstract:The use of micro selective laser melting (μ-SLM) enables product miniaturization, which is one of the megatrends in the metal processing industry and increasingly find its applications in biomedical and electronics industries. Among these, NiTi shape memory alloy (SMA) shows a great promise in functional micro-scaled components such as stent. There are inevitably some imperfections in SLM, but the imperfection formation in μ-SLM may not be the same as that in the conventional SLM. This work studies the imperfections in μ-SLM produced NiTi samples, with focus on defects, microstructure and thermal/mechanical behaviors. The effects of substrate material, laser-related process parameter and scanning strategy on defects such as porosity and cracks were analyzed, and a process window for "Scanning speed – Hatch spacing" was determined. Transformation peak was hardly detected in thermal behavior of as-printed and post heat-treated μ-SLM NiTi, resulting from microstructure inhomogeneity, Ti-rich impurity phases TiC1−xNx/Ti4Ni2Ox and precipitate Ti2Ni, which were introduced by powder preparation, μ-SLM or post heat treatment. The as-printed NiTi shows higher compressive strength and fracture strain than the post heat-treated samples, reaching 2796.57 MPa and 27.80% on average, respectively, but the plateau stress-strain stage is indistinguishable due to inhomogeneous and localized stress-induced martensite transformation. The brittle Ti2Ni phase was introduced in post heat treatment, leading to inhomogeneous microstructure and lower ductility. The underlying mechanisms revealed in these imperfections could serve as a guideline for defect control, process optimization, as well as post heat treatment methods for μ-SLM of NiTi alloy.

Analysis of microstructure, mechanical properties, wear characteristics and corrosion behavior of SLM-NiTi under different process parameters

Corrosion Behavior of NiTi Alloys Fabricate by Selective Laser Melting Subjected to Femtosecond Laser Shock Peening

Study on corrosion behavior of the selective laser melted NiTi alloy with superior tensile property and shape memory effect

Effect of heat treatment on the microstructure and in-situ corrosion behavior of SLM-NiTi alloys

Study on phase transformation behavior and mechanical properties of equiatomic ratio NiTi alloy formed by selective laser melting

Exploring the Friction and Wear Mechanisms of Nickel Titanium Alloy Fabricated by Laser Powder and Wire-Based Directed Energy Deposition

Microstructure and Corrosion Behavior of Ti-Nb Coatings on NiTi Substrate Fabricated by Laser Cladding

Microstructure and performance optimization of laser cladding nano-TiC modified nickel-based alloy coatings

Thermal effects on wear behavior of additively manufactured NiTi shape memory alloys

Micro selective laser melting of NiTi shape memory alloy: Defects, microstructures and thermal/mechanical properties

Microstructure and corrosion behavior of laser processed NiTi alloy

Effect of laser printing mode on surface topography, microstructure and corrosion property of additive manufactured NiTi alloy

Microstructure and Tribocorrosion Properties of NiTi/AlNi2Ti Ternary Intermetallic Alloy

Revealing the wear mechanism of NiTi alloy coatings with biomimetic sandwich structures by laser cladding

Characterization of microstructure, grain distribution, and tribocorrosion properties of NiTi-based alloy

Construction and parameter optimization of LPBF-NiTi alloy bionic superhydrophobic surface based on laser processing

Corrosion Behavior of TiNi Alloy Fabricated by Selective Laser Melting in Simulated Saliva

Optimizing laser parameters and exploring building direction dependence of corrosion behavior in NiTi alloys fabricated by laser powder bed fusion

Enhancing the surface finish and corrosion resistance of laser powder bed fusion NiTi surfaces through chemical polishing

Preparation of Self-Lubricating NiTi Alloy and Its Self-Adaptive Behavior

Microstructural Analysis, Tribological, and Corrosion Behavior of Nix-Tiy Alloys Deposited Using μ-Plasma Additive Manufacturing Process