Abstract:The effect of Cu content on GFA, crystallization behavior, and soft magnetic properties in high P Fe84+xB6P6C3Cu1−x (x = 0, 0.2, 0.4, 0.6, and 1.0 at. %) alloy ribbons were systematically investigated to balance the relationship between glass forming ability (GFA), heat treatment window, and soft magnetic properties of high saturation magnetic flux density (Bs) Fe-based nanocrystalline alloys. It was discovered that lowering Cu promotes the formation of an amorphous structure. The GFA of alloys rises from 23 μm for Fe84B6P6C3Cu1 to 29 μm for Fe84.4B6P6C3Cu0.6. Analysis of thermal physical properties shows that when Cu content is between 1.0 at. % and 0.6 at. %, reducing Cu in the alloys does not affect the onset temperature of the first crystallization peak (Tx1), the second one (Tx2), and ΔT (ΔT = Tx2 − Tx1), whereas when Cu content is less than 0.6 at. %, reducing Cu leads to an increase in Tx1 and a decrease in Tx2 and ΔT, which is not conducive to obtaining a wide temperature range of precipitation of a single α-Fe phase. The alloys have a wide range of crystallization annealing temperature (693–753 K) and annealing time (60–6 min) to obtain a low coercivity (Hc) of about 8.0 A/m, high Bs of about 1.80 T, and high effective magnetic permeability (μe) of about 10000 when Cu is between 1.0 at. % and 0.6 at. %. The Bs, Hc, and μe of Fe84.4B6P6C3Cu0.6 alloy annealed at 723 K for 30 min are 1.82 T, 8.1 A/m, and 10820, respectively.

Phase transformation, thermal behavior, and magnetic study of new (FeSiBP)100-XCuX glassy alloys obtained by melt-spinning in air

Fabrication and Soft Magnetic Properties of Fe–B–Si–Zr/Hf–Cu Nanocrystalline Alloys with High Glass-Forming Ability

Effect of Co Substitution on Crystallization and Magnetic Behavior of Fe85.45-xCoxCu0.55B14 Metallic Glass

Investigation of glass forming ability, crystallization behavior, and soft magnetic properties of Fe–B–P–C–Cu alloy ribbons

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Effect of Cu addition on the GFA, structure and properties of Fe-Co-based alloy

Novel Tin-Containing Fe-Base Glassy Alloys

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

Effects of Cu Additions on Mechanical and Soft-Magnetic Properties of CoFeBSiNb Bulk Metallic Glasses

Crystallization behavior, soft magnetic properties and good bending ductility of high Fe content FeSiBCuPC alloys induced by composition design

Evolution from antiferromagnetic order to spin-glass state in Fe1.05 − xCuxTe system

Influence of Cu Content on Structure and Magnetic Properties in Fe86-xCuxB14 Alloys

Effect of partial substitution of Cr with Co on glass forming ability, mechanical and magnetic properties in Fe48Mo14Cr15-xCoxB6P8Si7Y2 bulk metallic glasses

The role of Cu content on structure and magnetic properties of Fe–Si–B–P–Cu nanocrystalline alloys

Mechanically-Induced Solid-State Reaction for Fabrication of Soft Magnetic (Co75Ti25)100-xBx (x: 2, 5, 10, 15, 20, 25 at%) Metallic Glassy Nanopowders

Optimization of Crystallization Behavior and Soft Magnetic Properties of the Si-free Fe-B-P-C-Cu Nanocrystalline Alloys by Cu Content Tuning

Local Structure, Nucleation Sites and Crystallization Behavior and Their Effects on Magnetic Properties of Fe81Si X B10P8−xCu1 (x = 0~8)

Effect of Si/B ratio on glass-forming ability, phase transitions and magnetic properties in (Fe40Ni40SixByCu1)0.97Nb0.03 alloys

Magnetic Properties and Glass-Forming Ability of Modified Fe–P–Si–B Bulk Amorphous Alloys

Roles of Cu in Fe-based Soft Magnetic Nanocrystalline Alloys with High Fe Content

Excellent Soft Magnetic Properties and Enhanced Glass Forming Ability of Fe-Si-B-C-Cu Nanocrystalline Alloys