Abstract:With the rapid progress of science and technology, many applications of hard and brittle materials require advanced and suitable machining-techniques. One technique in particular, ultrasonic vibration-assisted polishing (UVAP), has been studied intensively by researchers worldwide. These studies indicate that UVAP has the capability to improve the surface quality as well as the machining efficiency. However, few studies focus on the deterministic material-removal of UVAP. The difference between generated and theoretical surface profiles determines the surface accuracy. Therefore, this paper focuses on predicting the generated local surface profile and providing a theoretical basis to reduce this error by controlling the polishing parameters. In addition to the axial ultrasonic vibration of polishing tool, ultrasonic atomization was adopted to provide uniformly distributed polishing slurry. To ensure sufficient surface-accuracy, it is necessary to predict the generated surface profile for a fixed spot as a basis research. This means, to enable accurate predictions the following improvements are realized: (i) A novel model for the elastic spherical contact-deformation of the polishing tool is used to calculate both the polishing force and contact radius. It takes into account the nonlinear elasticity of the polishing tool and the lateral extension of the contact area, which makes it more consistent with the actual deformation. (ii) A novel model for the material-removal distribution function for UVAP is proposed, based on the Preston equation. It considers the periodic changes of polishing force and contact radius caused by ultrasonic vibration. (iii) A series of fixed-spot polishing experiments on BK7 glass are carried out to verify the proposed models. The results show that the Preston coefficient is affected by axial ultrasonic amplitude, and large ultrasonic amplitude improves the polishing ability. In addition, the generated local surface profile, the maximum contact radius, as well as the material-removal depth and material-removal rate (MRR) can be predicted well. The new models not only provide a possibility to realize deterministic material removal but also enables in-depth-understanding of UVAP. It also represents a basic theoretical foundation for future, flat or free-form surface-polishing.

Material removal rate prediction and surface quality study for ultrasonic vibration polishing of monocrystalline silicon

Effect of ultrasonic vibration on polishing monocrystalline silicon: surface quality and material removal rate

Surface profile prediction modeling of spiral toolpath for axial ultrasonic vibration-assisted polishing

Multiscale model of material removal for ultrasonic assisted polishing of cylindrical surfaces

Material removal mechanism of non-resonant vibration-assisted magnetorheological finishing of silicon carbide ceramics

Surface Morphology Evolution during Chemical Mechanical Polishing Based on Microscale Material Removal Modeling for Monocrystalline Silicon

Modeling and prediction of generated local surface profile for ultrasonic vibration-assisted polishing of optical glass BK7

Profile prediction for ultrasonic vibration polishing of alumina ceramics

Material removal profile prediction and experimental validation for obliquely axial ultrasonic vibration-assisted polishing of K9 optical glass

Novel model of material removal rate on ultrasonic-assisted chemical mechanical polishing for sapphire

Prediction and verification of wafer surface morphology in ultrasonic vibration assisted wire saw (UAWS) slicing single crystal silicon based on mixed material removal mode

Study on machining BK7 optical glass by ultrasonic vibration-assisted polishing considering the micro-contact state of the abrasive particles with the workpiece

Theoretical Modeling and Surface Roughness Prediction of Microtextured Surfaces in Ultrasonic Vibration-Assisted Milling

Modeling and analysis for material removal and surface roughness in fluid jet polishing of optical glass

Experimental and simulation studies of abrasive particles impacting monocrystalline silicon in suspension thin film flow field of ultrasonic polishing

Cutting Speed Dependence of Material Removal Mechanism for Monocrystal Silicon

Parameter optimization of ultrasonic vibration polishing K9 optical glass based on ultrasonic atomization

Modeling of Material Removal Rate for the Fixed-Abrasive Double-Sided Planetary Grinding of a Sapphire Substrate

Roughness model of an optical surface in ultrasonic assisted diamond turning

Material removal rate model for chemical–mechanical polishing of single-crystal SiC substrates using agglomerated diamond abrasive

Experiment and theoretical prediction for surface roughness of PV polycrystalline silicon wafer in electroplated diamond wire sawing