Abstract:The aim of this study is to enhance the plasticity and strength of M2 high-speed steel through electron beam melting (EBM) technology. Therefore, by controlling different melting times to change the energy input, a gradient distribution of grain size and uniform distribution of carbides can be achieved. During the deformation process, the gradient structure causes geometrically necessary dislocations (GND) to accumulate near the boundary of regions in the soft zone, resulting in compressive stress in the soft zone and tensile stress in the hard zone, ultimately achieving heterogeneity-induced (HDI) work hardening. This study is to EBM technology for the design and fabrication of three types of M2 high-speed steel samples, denoted as SS-1, SS-2, and SS-3, utilizing three distinct scanning strategies: single melting, double melting, and a combination thereof. The microstructure and phase evolution of these samples were comprehensively characterized using optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electron backscatter diffraction (EBSD) techniques. The findings demonstrate that when sample SS-3 was subjected to the combined scanning strategy involving both single melting and double melting approaches, its crystal structure exhibited a gradient distribution along with the presence of back stress during tensile testing. Sample SS-3 achieved an average tensile strength of 1479 MPa with an average elongation rate of 1.8%. This represents an enhancement in average tensile strength by approximately 8.6% compared to sample SS-1 (∼1362 MPa) and a significant increase in average elongation rate by around 20% compared to SS-1 (∼1.44%). The gradient grain structure materials show the microstructure transformation from fine grain to coarse-grain in the same material, thus reducing the stress concentration caused by the change of mechanical properties in each region. The SS-3 sample can maintain significant ductility while improving tensile strength. Consequently, this represents a pivotal direction for the advancement of high-performance structural materials. The conducted experimental studies have demonstrated that geometrically necessary dislocations (GNDs) and their associated strain hardening play a crucial role in enhancing the strength of grain structure materials. Additionally, these are essential to achieve an exceptional synergy between strength and toughness in these materials.

Microstructural evolution and tribological properties of M2 high-speed steel fabricated under various selective electron beam melting processing parameters

Development of Powder Metallurgy High Speed Steel

Microstructure and mechanical properties of M2 high speed steel produced by electron beam melting

Improvement of mechanical property of M2 high-speed steel with hetero-microstructure tailored via electron beam melting

A modified M2 high-speed steel enhanced by in-situ synthesized core-shell MC carbides

Mechanical and tribological assessments of high-vanadium high-speed steel by the conventional powder metallurgy process

Microstructure, Properties and Crack Suppression Mechanism of High-speed Steel Fabricated by Selective Laser Melting at Different Process Parameters

Microstructure evolution and mechanical properties of H13 steel produced by Selective Electron Beam Melting

Rapid Solidification Microstructure and Carbide Precipitation Behavior in Electron Beam Melted High-Speed Steel

Friction And Wear Characteristics Of M2 High Speed Steel At High Speed Dry Sliding Condition

Microstructure Evolution and Precipitation Strengthening Behaviour of Additively Manufactured High-speed Steels

Microstructural changes in as-cast M2 grade high speed steel during high temperature treatment

Effect of Tempering Conditions on Secondary Hardening of Carbides and Retained Austenite in Spray-Formed M42 High-Speed Steel

Hardening of Selective Laser Melted M2 Steel

Effect of Microstructural Evolution on Mechanical Properties of Secondary Hardening Low‐carbon High‐alloy Bearing Steel

Microstructure mechanical properties and tribological properties of high entropy M 2 AlC-MC (M = Ti, V, Zr, Hf, Ta) composites prepared via spark plasma sintering

Effect of Tungsten Carbide Additions on the Microstructure, Mechanical, and Tribological Properties of M2 High-Speed Steel Matrix Composites

Microstructural Evolution, Behavior of Precipitates, and Mechanical Properties of Powder Metallurgical High-Speed Steel S390 During Tempering

Homogenization Treatment and Plastic Deformation Improve the Carbide Homogeneity of M42 High-Speed Steel

Superior Mechanical Properties of M35 High-Speed Steel Obtained by Controlling Carbide Precipitation and Distribution Via Electropulsing Treatment

Evolutions of Microstructure by Cerium Treatment in As‐Cast M2 High‐Speed Steel