Abstract:Printed electronics has advanced during the recent decades in applications such as organic photovoltaic cells and biosensors. However, the main limiting factors preventing the more widespread use of printing in flexible electronics manufacturing are (i) the poor attainable linewidths via conventional printing methods (≫10 μm), (ii) the limited availability of printable materials (e.g., low work function metals), and (iii) the inferior performance of many printed materials when compared to vacuum-processed materials (e.g., printed vs sputtered ITO). Here, we report a printing-based, low-temperature, low-cost, and scalable patterning method that can be used to fabricate high-resolution, high-performance patterned layers with linewidths down to ∼1 μm from various materials. The method is based on sequential steps of reverse-offset printing (ROP) of a sacrificial polymer resist, vacuum deposition, and lift-off. The sharp vertical sidewalls of the ROP resist layer allow the patterning of evaporated metals (Al) and dielectrics (SiO) as well as sputtered conductive oxides (ITO), where the list is expandable also to other vacuum-deposited materials. The resulting patterned layers have sharp sidewalls, low line-edge roughness, and uniform thickness and are free from imperfections such as edge ears occurring with other printed lift-off methods. The applicability of the method is demonstrated with highly conductive Al (∼5 × 10-8 Ωm resistivity) utilized as transparent metal mesh conductors with ∼35 Ω□ at 85% transparent area percentage and source/drain electrodes for solution-processed metal-oxide (In2O3) thin-film transistors with ∼1 cm2/(Vs) mobility. Moreover, the method is expected to be compatible with other printing methods and applicable in other flexible electronics applications, such as biosensors, resistive random access memories, touch screens, displays, photonics, and metamaterials, where the selection of current printable materials falls short.

Roll‐to‐Roll Patterning of Indium‐Tin‐Oxide Electrodes Using a Low‐Cost Laser‐Marking Machine

High-Resolution Rapid Prototyping of Liquid Metal Electronics by Direct Writing on Highly Prestretched Substrates

Fabrication of ITO microelectrodes and electrode arrays using a low-cost CO2 laser plotter

Nanomaterials/Polymer-Integrated Flexible Sensors: A Full-laser-processing Approach for Real-Time Analyte Monitoring

Cleanroom‐Free Direct Laser Micropatterning of Polymers for Organic Electrochemical Transistors in Logic Circuits and Glucose Biosensors

Highly Flexible and Sensitive Pressure Sensor: Fabrication of Porous PDMS/Graphene Composite via Laser Thermoforming

Femtosecond-Laser-Assisted Fishbone-Inspired Patterning of Selective Liquid Metal Dewetted Electrodes for Flexible Electronics

Electrochemical Replication and Transfer for Low-Cost, Sub-100 Nm Patterning of Materials on Flexible Substrates.

Splashing‐Assisted Femtosecond Laser‐Activated Metal Deposition for Mold‐ and Mask‐Free Fabrication of Robust Microstructured Electrodes for Flexible Pressure Sensors (Small 24/2023)

Development of highly sensitive and stable patterned PDMS flexible strain sensors for motion monitoring via laser direct writing

Laser Direct Activation of Polyimide for Selective Electroless Plating of Flexible Conductive Patterns

Cost-Effective Methods to Nanopattern Thermally Stable Platforms on Kapton HN Flexible Films Using Inkjet Printing Technology to Produce Printable Nitrate Sensors, Mercury Aptasensors, Protein Sensors, and Organic Thin Film Transistors

Reverse-Offset Printing of Polymer Resist Ink for Micrometer-Level Patterning of Metal and Metal-Oxide Layers

Direct laser patterning of organic semiconductors for high performance OFET-based gas sensors

Implementation of high‐performance, freestanding flexible film masks through photosensitive polyimide for arbitrary surface micropatterns creation

Flexible Metal Electrodes by Femtosecond Laser-Activated Deposition for Human–Machine Interfaces

Precise Micropatterning of a Porous Poly(Ionic Liquid) via Maskless Photolithography for High-Performance Non-Enzymatic H2O2 Sensing

Beyond Conventional Patterns: New Electrochemical Lithography with High Precision for Patterned Film Materials and Wearable Sensors.

Targeting new ways for large-scale, high-speed surface functionalization using Direct Laser Interference Patterning in a roll-to-roll process

Highly flexible liquid metal/photocurable polymer electrodes via direct laser patterning

A Rapid and Straightforward Liquid Metal Patterning Technique on Paper Using Laser Printer for Soft Electronics