Femtosecond-Laser-Assisted Fishbone-Inspired Patterning of Selective Liquid Metal Dewetted Electrodes for Flexible Electronics

Chaerin Yu,Hyunmin Cho,Won-Sup Lee,Junhee Jo,Hyesu Kim,Won Seok Chang

DOI: https://doi.org/10.1021/acsaelm.3c01500

IF: 4.494

2024-01-05

ACS Applied Electronic Materials

Abstract:Femtosecond-laser-induced selective fishbone-inspired and trapezoidal structures provide low surface energies for liquid metal (LM) and LM-phobic surfaces. This laser-based technique is suitable for processing heat-vulnerable flexible substrates and minimizing changes in their physical properties, which can be analyzed by Fourier-transform infrared spectroscopy. In this study, we developed a femtosecond-laser-assisted fishbone-inspired patterning process for a selective LM wettable surface on a flexible substrate. Because the ribs of the fishbone-inspired structure were developed between laser-ablated lines, the entire LM-phobic pattern was covered without processing the entire surface area. In the fishbone-inspired pattern, the region directly exposed to the femtosecond laser served as the “spines”, while the burrs, which were a byproduct of laser processing, acted as the “ribs”. A minimum line width of ∼40 μm was realized using this structural mechanism. The patterned LM-phobic surface exhibited low surface energy with a 156° contact angle for the LM material. The patterned LM on a flexible poly­(dimethylsiloxane) substrate maintained a stable electrical connection with minimal deviations, even under bending, twisting, and stretching conditions. These processes and structures can be used to fabricate flexible, stretchable, and wearable electronic devices.

materials science, multidisciplinary,engineering, electrical & electronic