Thermodynamics and kinetics analysis of hydrogen absorption in large-scale metal hydride reactor coupled to phase change material-metal foam-based latent heat storage system
Atef Chibani,Slimane Merouani,Noureddine Gherraf,Yacine Benguerba
DOI: https://doi.org/10.1016/j.ijhydene.2022.06.079
IF: 7.2
2022-07-11
International Journal of Hydrogen Energy
Abstract:Phase change materials (PCMs) have recently been coupled with metal hydride storage tanks (MHSTs) to store adsorption heat and subsequently deliver it for hydrogen desorption through melting and solidification cycles. This method might reduce process costs by eliminating the use of HTF (i.e. heat transfer fluid). However, thermodynamics and kinetic data are scarce for large-scale MH-PCM applications, particularly when PCM is loaded in metal foams (MFs) to promote heat transfer. The current work aimed to develop a 2D model for simulating H 2 -absorption in a LaNi 5 -metal bed integrating a PCM-MF unit in a large-scale tube-and-shell heat exchanger. The constructed model (via Fluent 15.0 CFD-platform) was first-validated using referenced experimental data. The resulting heat transfer was analyzed for different MFs [aluminum, copper, nickel and titanium] of different porosities (0.1–1.0). Excellent outcomes were retrieved. By trapping the H 2 -absorption heat, the MF-PCM unit improved the LaNi 5 hydriding. The LaNi 5 charging was achieved after ∼500 s, independently of the MF type and porosity. The PCM melting rate depends on tube position, porosity and the MF type. It increased with MFs incorporation (order of enhancement: Cu > Al > Ni > Ti) and MF-porosity decrease (from ε = 100% to 10%). Besides, the PCM tube above the H 2 -feeding pipe melts more quickly than the other tubes, presumably to the gravitational-force effect. Longer times (i.e. 9 000 s to >16 000 s, depending on tube position) were recorded for complete melting of the PCM when ε MF = 100%; however, when ε MF is less than 80%, the required time for total melting was tremendously reduced to less than 500 s. Nevertheless, the MFs porosity could not be decreased considerably to avoid a huge loss of material storage (PCM), thereby diminishing the thermal storage performance of the PCM matrix.
energy & fuels,electrochemistry,chemistry, physical