Experimental and numerical assessments of thermal transport in phase change material embedding additively manufactured triply periodic minimal surfaces: A comparative evaluation
Zhe Yang,Tao Zhang,Wenfeng Li,Yunteng Zhou,Xudong Li,Fei Liu
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122850
IF: 6.4
2024-03-09
Applied Thermal Engineering
Abstract:Phase change materials (PCMs), due to their inherent low conductivity, are presently restricted in their potential applications for thermal energy storage (TES) systems. Extensive effort has been made over the past few years to investigate the potential of porous materials, such as metal foams, as effective thermal conductivity enhancers (TCEs) for PCMs. Porous materials have superior specific surface area over conventional honeycomb structures and fins, providing great potential in thermal storage systems. In this study, taking advantage of the implicit function of triply periodic minimal surface (TPMS), new varieties of lattices with continuous surface structures were developed and then manufactured by using AlSi10Mg powder via selective laser melting (SLM). A three-dimensional transient phase-change heat storage model of TPMS (Primitive and I-WP) structure-paraffin composite PCMs was adopted to study both the phase-change heat transfer performance and heat storage capability of TPMS-PCMs during the phase transition. Meanwhile, the evolution of the solid–liquid interface and temperature–time history were investigated by utilizing the visualized thermal storage experiments. The findings revealed that embedding TPMS lattice decreased the natural convection effect, resulting in a maximum flow velocity of liquid paraffin wax (PX) within TPMS-PCMs that was only 0.1 times that of pure PX. The melting onset time of TPMS-PCMs was advanced by 82.2 %-91.1 %, and the duration of phase change was shortened by 68.3 %-75.9 %, respectively. In addition, the total heat storage of TPMS-PCMs fell from 4464.0 J to 4217.2 J compared to pure PX, but their average heat storage rate rose from 1.04 to 4.58 J/s. Primitive rod (PS)-type TPMS-PCM was the most potential among the three types of TPMS lattices as the TCE for PCM because it achieved the highest heat storage rate with the most negligible overall heat storage loss.
energy & fuels,engineering, mechanical,thermodynamics,mechanics