Abstract:The integration of a composite of porous medium with phase change material (PCM) offers significant advantages in thermal management systems, enhancing heat transfer efficiency and addressing various thermal regulation challenges. This approach utilizes the PCM's latent heat absorption and the enhanced thermal conductivity provided by the porous medium, resulting in optimized system performance. Its applicability spans across electronics cooling and building insulation systems. However, predicting the thermal behavior of this composite material is challenging, necessitating computational tools to anticipate its response under different conditions and evaluate its influence on cooling strategies. The objective of this study is to create a computational tool specifically tailored to evaluate constitutive parameters of this composite material, thereby providing a comprehensive description of its thermal behavior. To achieve this goal, the multiscale homogenization principle is employed to assess the composite's effective thermophysical material properties using the representative volume element approach. The repeating unit cell of the aluminum lattice is incorporated into the PCM to define a representative volume element. The finite element method (FEM) is utilized to solve the three-dimensional homogenization problem, yielding an orthotropic effective thermal conductivity due to the inherent symmetry of the repeating material cell. Moreover, the study leverages the apparent heat capacity method to effectively manage the phase transitions within the PCM domain, utilizing smooth and temperature-dependent functions to accurately describe the thermophysical properties of the PCM. Integrating the composite into battery pack thermal management, this study thoroughly examines thermal dynamics by comparing outcomes with and without PCM integration. The transient thermal problem is accurately tackled using the FEM, employing the evaluated effective constitutive parameters of the homogenized composite to minimize computational effort. The results indicate a notable decline in the highest temperatures of the battery pack, leading to a reduction of about 14 °C at the specific moment when the phase change material fully transitions into its liquid form. The obtained results emphasize the effectiveness and practical feasibility of the proposed thermal management strategy. The modeling approach presented provides a robust tool with significant efficiency in reducing computational time for analyzing the thermal behavior of large models, as the utilization of the homogenization technique notably decreases the computational time.

Non-invasive measurement of the temperature field of a phase change material (PCM) using thermal imaging

Melting of A Phase Change Material Filled in A Metal Foam: A Visualized Study at the Pore-Scale Using Infrared Imaging

A Novel Indirect Visualization Method for Studying the Melting Heat Transfer of Nano-Enhanced Phase Change Materials Using Thermochromic Liquid Crystal Thermography

Local Thermal Nonequilibrium During Melting of a Paraffin Filled in an Open-Cell Copper Foam: A Visualized Study at the Pore-Scale

Combined measurement and calibration method for the thermal conductivity of phase change materials

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

RESEARCH ON THE THERMAL-DEFORMATION CONTROL BY USING CONSTANT TEMPERATURE CONSTRUCTION OF PHASE CHANGE MATERIAL

Experimental Investigation on the Characteristics of Melting Process of Phase Change Material in Horizontal Annulus

Imaging of phase change materials below a capping layer using correlative infrared near-field microscopy and electron microscopy

Thermal modeling of porous medium integrated in PCM and its application in passive thermal management of electric vehicle battery pack

Time-resolved temperature mapping leveraging the strong thermo-optic effect in phase-change devices

Non-invasive thermal assessment of tissue phantoms using an active near field microwave imaging technique

Metrology based on transient heat transfer theory for evaluating phase change materials with differential scanning calorimetry

Calibration of differential scanning calorimeter (DSC) for thermal properties analysis of phase change material

Dynamics of PCM Melting Driven by Spatially Varying Heat Load

Depth Thermography: Noninvasive 3D Temperature Profiling Using Infrared Thermal Emission

Determination on the thermal conductivity and thermal contact resistance of thin composite phase change films as a thermal interfacial material

A Novel Method for Determining the Melting Point, Fusion Latent Heat, Specific Heat Capacity and Thermal Conductivity of Phase Change Materials

Infrared thermotransmittance-based temperature field measurements in semitransparent media

Transient Determination on the Bulk Thermal Conductivity of Sub-Millimeter Thin Films of Composite Phase Change Thermal Interfacial Materials

Depth thermography: non-invasive 3D temperature profiling using infrared thermal emission