Abstract:An experimental and computational investigation directed at understanding the role of buoyancy-driven convection during constrained melting of phase change materials (PCM) inside a spherical capsule is reported. The computations are based on an iterative, finite-volume numerical procedure that incorporates a single-domain enthalpy formulation for simulation of the phase change phenomenon. A Darcy’s Law-type porous media treatment links the effect of phase change on convection. Paraffin wax n-octadecane was constrained during melting inside a transparent glass sphere through the use of thermocouples installed inside the sphere. The melting phase front and melting fraction of the PCM are analyzed and compared with numerical solution obtained from the CFD code Fluent. Following a short period of symmetric melting due to prominence of diffusion, expedited phase change in the top region of the sphere and a wavy surface at the bottom of the PCM are observed. The computational predictions point to the strong thermal stratification in the upper half of the sphere that results from rising of the molten liquid along the inner surface of the sphere thus displacing the colder fluid. The waviness and excessive melting of the bottom of the PCM is shown to be underestimated by the experimental observation. This discrepancy is linked to the use of a support structure to hold the sphere. Measured temperature data and computational results near the bottom indicate the establishment of an unstable fluid layer that promotes chaotic fluctuations and is responsible for waviness of the bottom of the PCM. On the other hand, the comparison between the measured and computed temperatures in the top half of the sphere show the stable nature of the molten liquid layer. The computational results start to deviate from the thermocouple readings as one moves lower from the top of the sphere. This delay in predicting the melting instant is linked to the thermal stratification within the “constant temperature bath” that encloses the capsule.

Melting of A Phase Change Material Filled in A Metal Foam: A Visualized Study at the Pore-Scale Using Infrared Imaging

Local Thermal Nonequilibrium During Melting of a Paraffin Filled in an Open-Cell Copper Foam: A Visualized Study at the Pore-Scale

A Pore-Scale Visualized Study of Melting Heat Transfer of a Paraffin Wax Saturated in a Copper Foam: Effects of the Pore Size

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

A Novel Indirect Visualization Method for Studying the Melting Heat Transfer of Nano-Enhanced Phase Change Materials Using Thermochromic Liquid Crystal Thermography

An Experimental Investigation of Constrained Melting Heat Transfer of Nano-Enhanced Phase Change Materials in a Horizontal Cylindrical Capsule Using Thermochromic Liquid Crystal Thermography

Transient Performance of a Thermal Energy Storage-Based Heat Sink Using a Liquid Metal As the Phase Change Material

A volume-shrinkage-based method for quantifying the inward solidification heat transfer of a phase change material filled in spherical capsules

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Effect of filling configurations on melting heat transfer characteristic of phase change materials partially filled with metal foam

Pore-scale investigation on the heat-storage characteristics of phase change material in graded copper foam

Effect of enhancement in metal foam pore density on heat transfer of phase-change materials

Experimental investigation on the melting behavior of phase change materials in open-cell metal foams in an inclined rectangular enclosure

Melting of Phase Change Materials with Volume Change in Metal Foams

Experimental and simulation study on the heat transfer mechanism and heat storage performance of copper metal foam composite paraffin wax during melting process

Experimental and numerical investigations of enhanced thermal energy storage performance for foam/paraffin composite under different heating conditions

Melting behaviors of PCM in porous metal foam characterized by fractal geometry

Experimental investigation of the effect of copper foam pore structure on the thermal performance of phase change material in different centrifugal force fields

Thermal effect of nanoparticles on the metal foam composite phase change material: A pore-scale study

Pore-scale study on Rayleigh-Bénard convection formed in the melting process of metal foam composite phase change material

Numerical simulation on thermal behavior of partially filled metal foam composite phase change materials