Abstract:Additive manufacturing high-strength steel has a unique manufacturing process and has broad application prospects in military equipment, aerospace, and other fields, but it is often threatened by dynamic loads such as explosion and high-speed impact during use, which has attracted wide attention. In this paper, the dynamic impact of additive manufacturing high-strength steel LMD-BK and wrought high-strength steel BK was carried out at strain rates of 1000 s −1 –5000 s −1 by the Split-Hopkinson pressure bar (SHPB) test, respectively, and the differences in the dynamic mechanical properties of the two were investigated under the impact of different strain rates. Using scanning electron microscope (SEM) and electron backscatter diffraction (EBSD) micro-observation techniques, the microstructure morphologies of LMD-BK and BK before and after dynamic impact were characterized, and the microstructure evolution mechanism of the two was investigated. The results show that both LMD-BK and BK are strain rate sensitive, and the dynamic compressive strength increases and then decreases with the increase of strain rate, with a maximum at 2000 s −1 and a minimum at 1000 s −1 . The maximum and minimum values of dynamic compressive strength for LMD-BK are 1978 MPa and 1757 MPa, respectively; for BK, the maximum and minimum values of dynamic compressive strength are 1389 MPa and 1329 MPa, respectively. The final strain of the material increases as the strain rate increases. At the same strain rate, the final strain of BK is always larger than that of LMD-BK. With the increase in strain rate, the impact work absorbed by the material increases, and at the same strain rate, LMD-BK can absorb more impact work than BK. Microscopic observations show that after dynamic impact, LMD-BK undergoes fragmentation of the columnar structure and compression of the cellular structure to form a deformation localization zone. These results are of great significance for the study of dynamic mechanical properties and microstructure evolution mechanism of high-strength steel made by additive manufacturing under extreme environments such as explosion and high-speed impact.

Synergistic Effect of Energy Absorption and Adiabatic Temperature on the Microstructural Evolution and Mechanical Properties During High-Speed Impacts

Unveiling the Initiation and Evolution Mechanisms of Adiabatic Shear Band in Extruded 7003 Aluminum Alloy under High-Speed Impact Load

The Deformation Mechanism and Adiabatic Shearing Behavior of Extruded Mg-8.0Al-0.1Mn Alloy in Different Heat Treated States under High-Speed Impact Load

Dynamic response and microstructure evolution of titanium alloy plates under low-velocity impact

Microstructure Evolution of Adiabatic Shear Band in AZ31 Alloy under Dynamic Compression

Study of the impact properties and microstructure evolution in a high-strength low-alloy heavy steel

Subsurface Microstructure Evolution of Hadfield Steel under High Impact Energy

Characterization of Adiabatic Shear Bands in AM60B Magnesium Alloy under Ballistic Impact

Favorable Impact Toughness of High Heat Input Coarse-Grained HAZ in an Ultra-Low Carbon High-Strength Microalloyed Steel

Study on the effect of grain size on the microstructure evolution of Q345 steel plate under high-speed impact

Deformed Microstructure Evolution in AM60B Mg Alloy under Hypervelocity Impact at a Velocity of 5 Km S−1

Effect of Microstructure Evolution on Impact Toughness in Advanced Ultra-High Strength Steel

Insights into microstructural evolution and deformation behaviors of a gradient textured AZ31B Mg alloy plate under hypervelocity impact

Significant influence of heat input on microstructure evolution and mechanical properties of the simulated CGHAZ in a 1000 MPa grade ultra-high strength steel

Adiabatic shearing mechanism on Al-4.2%Cu alloy bars subjected to electromagnetic loading

Numerical Investigation of the Damage Effect on the Evolution of Adiabatic Shear Banding and Its Transition to Fracture during High-Speed Blanking of 304 Stainless Steel Sheets

Comparative study on dynamic mechanical properties of additive manufacturing high strength steel and wrought high strength steel under high strain rate

Thickness Dependence of Toughness in Ultra-Heavy Low-Alloyed Steel Plate after Quenching and Tempering

Characterization of the Deformed Microstructure in 1cr18niti Stainless Steel under Ballistic Impact

Dynamic shear behavior of forged CrMnFeCoNi high entropy alloy using hat-shaped specimens over a wide range of temperatures and strain rates

Temperature increases and thermoplastic microstructural evolution in adiabatic shear bands in a high-strength and high-toughness 10 wt.% Ni steel