Abstract:NbMoTaW and VCrTaW high-entropy alloys (HEA) coatings with near-equal atomic ratios were deposited onto the T91 substrate by magnetron sputtering. The two HEA coatings and the T91 substrate were irradiated to the peak damage 50 displacements per atom (dpa) and 100 dpa using 2.7 MeV Si2+ at 550 °C. X-ray diffraction (XRD), Scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and nanoindentation techniques were used to study the changes in grain morphology, microstructure, element distribution and hardness before and after irradiation. The results showed that the grain structure was stable and the coatings were closely bonded to the substrate after irradiation. The elements (Ta and W) near the grain boundary in NbMoTaW coating were depleted before irradiation, but they became homogenized after irradiation. A large number of dislocation loops were observed in both the T91 substrate and HEA coatings after irradiation, the HEA coatings significantly increased the doses required for the full evolution of the dislocation loops. With the increase of damage doses, the dislocation loops size of HEA coatings increased and the number density decreased. The size of the dislocation loops of the two coatings was similar, while the number density of the dislocation loops of NbMoTaW coating was lower than that of VCrTaW coating. Both HEA coatings were significantly hardened after irradiation and the hardening rate of NbMoTaW coating was lower than that of VCrTaW coating. Interestingly, the hardening rate of 50 dpa was higher than 100 dpa for both HEA coatings, which was determined by softening factor and hardening factor in the irradiation process. Based on the defects and hardening rate caused by irradiation, it was preliminarily concluded that NbMoTaW coating had better irradiation resistance, and the above results provide an important reference for the subsequent optimization of lead-based fast reactors structural materials.

Unique dislocation loops distribution of AlCrFeNiTix eutectic high-entropy alloys under high-temperature ion irradiation

Atomic scale structure dominated FCC and B2 responses to He ion irradiation in eutectic high-entropy alloy AlCoCrFeNi2.1

Irradiation damage versus lattice distortion in AlNbTiVCrx (x = 0, 0.5, 1) high-entropy alloys from first-principles calculations and irradiation experiments

Hot deformation characteristics and microstructure evolution of Al20Co36Cr4Fe4Ni36 eutectic high entropy alloy

Microstructure investigations of Fe50Mn30Co10Cr10 dual–phase high–entropy alloy under Fe ions irradiation

Structural Damage and Phase Stability of Al0.3CoCrFeNi High Entropy Alloy under High Temperature Ion Irradiation

Irradiation damage and swelling of carbon-doped Fe38Mn40Ni11Al4Cr7 high-entropy alloys under heavy ion irradiation at elevated temperature

Irradiation damage behavior of the non-equal atomic AlNbMoZrB high-entropy alloy

Dislocation loops and hardening induced by Au ion irradiation in FeCrAl alloys with three solute concentrations

Precipitation behavior of AlxCoCrFeNi high entropy alloys under ion irradiation

A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures

Excellent strength-ductility in Ti-alloyed Fe35Ni35Cr20Mn10 high-entropy alloy

Dislocation loops, segregation and hardening induced by high-dose ion irradiation of NbMoTaW and VCrTaW high-entropy alloy coatings on the T91 substrate

Irradiation Effects on Al0.3CoCrFeNi and CoCrMnFeNi High-Entropy Alloys, and 316H Stainless Steel at 500 °C

Precipitation behavior of Al x CoCrFeNi high entropy alloys under ion irradiation

Effect of Carbon on Dislocation Loops Formation during Self-Ion Irradiation in Fe-Cr Alloys at High Temperatures

Microstructure and mechanical properties of CrFeNi high-entropy alloy reinforced by Al and Ti elements

Effects of vacuum heat treatment on novel Co-free Al0·9Cr0·8FeMn0·8Ni2.0 eutectic high entropy alloy: Microstructure evolution and mechanical properties

Balanced mechanical properties of Al0.3CoCrFeNiTix high-entropy alloys by tailoring Ti content and heat treatment

He-ion Irradiation Effects on the Microstructures and Mechanical Properties of the Ti-Zr-Hf-V-Ta Low-Activation High-Entropy Alloys

Microstructure and micromechanical responses of bulk nanostructured high entropy alloy after heavy-ion irradiation at 500°C