Abstract:Clay minerals have large surface areas that contribute to their high adsorption capacity. Pure clays were often used. However, their prices remain expensive. However, the natural clay minerals that are locally available can have economic and environmental benefits for textile wastewater treatment. The tested natural clays had given low removal yields. Therefore, we wanted to test particular rich organic matter clay for adsorbing azo dye, which is a very toxic molecule. In order to make the use of this clay type have a better efficiency for removal of this dye from the polluted waters, the optimal conditions had been specified. The results indicated that advised conditions were as follows: 5 min was the contact time of dye-clay; the better adsorbent masses were 0.25 g and 0.5 g per 100 ml solution for raw (ANb) and purified clays (ANp), respectively; the initial dye concentrations were 1 gL −1 for raw clay and 50 mgL −1 for purified clay; pH solution had any effect on the yield of dye removal only when raw clay was used; however, acid environment was advised when purified clay was the adsorbent and for the two tested clays about 20–30°C was the better solution temperature. X-Ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) analysis confirmed that functional groups of clay adsorbed the dye. Langmuir maximum adsorption capacities of ANb and ANp were found to be 397 mgg −1 and 132.3 mgg −1 at pH 7 and 5, respectively. Raw and chemically activated samples gave similar results. Adsorption of ANb and ANp data showed better agreement with the pseudo-second-order kinetic model. Thermodynamic parameters of the two adsorbents confirmed that the adsorption was endothermic (ΔH > 0) and spontaneous (ΔG 0 < 0). Energy level was high when purified clay was used; however, it was significantly lower when the adsorbent was raw clay. Therefore, it was likely that adsorption by carbonates and organic matter involved small energy amounts. Comparing between these and other previous results, Jebel Louka natural clay type is better recommended for MR removal from textile wastewater, since the removal yield was about 98%. Hence, this tested clay type could provide an alternative low-cost material that could be used in treatment of the textile wastewater rich in MR and the obtained adsorption model and desorption tests provided a background for pilot and industrial scale applications.

Removal of Aniline from Aqueous Solution by Adsorption on a Modified Montmorillonite Clay Kinetic and Thermodynamic Studies

Adsorption, Modeling, Thermodynamic, and Kinetic Studies of Methyl Red Removal from Textile-Polluted Water Using Natural and Purified Organic Matter Rich Clays as Low-Cost Adsorbent

Adsorption characteristics, isotherm, kinetics, and diffusion of modified natural bentonite for removing diazo dye

Removal of the Amoxicillin antibiotic from aqueous matrices by means of an adsorption process using Kaolinite clay

Comparison of kinetic study of the adsorption of bromothymol blue on activated Attapulgite clay and commercial activated carbon

ADSORPTION OF ANILINE AND TOLUIDINES ON MONTMORILLONITE

Effective removal of nitrate ions from aqueous solution using new clays: Tamazert kaolin treated under microwave irradiation

organo acid-activated clays for water treatment as removal agent of Eosin-Y: Properties, regeneration, and single batch design absorber

Equilibrium, Kinetic and Thermodynamic Studies on the Adsorption of 2-Nitroaniline Onto Activated Carbon Prepared from Cotton Stalk Fibre.

Removal of Organic Matter from Tunisian Industrial Phosphoric Acid by Adsorption onto Purified Natural Illite/Kaolinite Clay: Kinetics, Isothermal and Thermodynamic Studies

Adsorption of Cationic and Anionic Dyes on Montmorillonite in Single and Mixed Wastewater

Efficient Removal of Cationic Dye from Wastewater using Novel Low-Cost Adsorbent, Cellulose-Clay Composite: Insights from Isotherm, Kinetic, Thermodynamic, and Molecular Dynamics Simulation Studies

Removal of Methyl Violet from Aqueous Solution by Adsorption onto Halloysite Nanoclay: Experiment and Theory

Kinetics and equilibrium studies on the adsorptive removal of Nile red dye from aqueous solution using serpentine clay

Optimization of arsenite removal by adsorption onto organically modified montmorillonite clay: Experimental & theoretical approaches

Use of a novel low-cost adsorbent PANI@Clay composite to effectively remove OG dye from wastewater: Insights from isotherm kinetic and thermodynamic modeling, investigation using density functional theory DFT/MC/MD

Adsorption of methylene blue dye onto bentonite clay: Characterization, adsorption isotherms, and thermodynamics s tudy by using UV-Vis technique

RSM optimization studies for cadmium ions adsorption onto pristine and acid-modified kaolinite clay

Adsorption of Naphthalene on Clay Minerals: A Molecular Dynamics Simulation Study

Detailed study of Safranin-O adsorption on sepiolite clay: Kinetics, thermodynamics, isotherms and theoretical calculations for optimal water treatment efficiency