Abstract:Clay minerals have large surface areas that contribute to their high adsorption capacity. Pure clays were often used. However, their prices remain expensive. However, the natural clay minerals that are locally available can have economic and environmental benefits for textile wastewater treatment. The tested natural clays had given low removal yields. Therefore, we wanted to test particular rich organic matter clay for adsorbing azo dye, which is a very toxic molecule. In order to make the use of this clay type have a better efficiency for removal of this dye from the polluted waters, the optimal conditions had been specified. The results indicated that advised conditions were as follows: 5 min was the contact time of dye-clay; the better adsorbent masses were 0.25 g and 0.5 g per 100 ml solution for raw (ANb) and purified clays (ANp), respectively; the initial dye concentrations were 1 gL −1 for raw clay and 50 mgL −1 for purified clay; pH solution had any effect on the yield of dye removal only when raw clay was used; however, acid environment was advised when purified clay was the adsorbent and for the two tested clays about 20–30°C was the better solution temperature. X-Ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) analysis confirmed that functional groups of clay adsorbed the dye. Langmuir maximum adsorption capacities of ANb and ANp were found to be 397 mgg −1 and 132.3 mgg −1 at pH 7 and 5, respectively. Raw and chemically activated samples gave similar results. Adsorption of ANb and ANp data showed better agreement with the pseudo-second-order kinetic model. Thermodynamic parameters of the two adsorbents confirmed that the adsorption was endothermic (ΔH > 0) and spontaneous (ΔG 0 < 0). Energy level was high when purified clay was used; however, it was significantly lower when the adsorbent was raw clay. Therefore, it was likely that adsorption by carbonates and organic matter involved small energy amounts. Comparing between these and other previous results, Jebel Louka natural clay type is better recommended for MR removal from textile wastewater, since the removal yield was about 98%. Hence, this tested clay type could provide an alternative low-cost material that could be used in treatment of the textile wastewater rich in MR and the obtained adsorption model and desorption tests provided a background for pilot and industrial scale applications.

Effective removal of nitrate ions from aqueous solution using new clays: Tamazert kaolin treated under microwave irradiation

Synthesis of New Kaolin Molecular Sieves from Kaolin and Its Adsorption of Nh4+

Removal of phosphate from synthetic wastewater: A comparative study between both activated clays using an experimental design methodology

Adsorption, Modeling, Thermodynamic, and Kinetic Studies of Methyl Red Removal from Textile-Polluted Water Using Natural and Purified Organic Matter Rich Clays as Low-Cost Adsorbent

Removal of the Amoxicillin antibiotic from aqueous matrices by means of an adsorption process using Kaolinite clay

Comparing Adsorption Properties of Algerian Kaolinite Towards Phosphate with Those of Activated Carbon: Adsorption Experiments, Molecular Modeling and an Initiative Toward Hydroponic Wastewaters Remediation

Highly Selective Removal of Nitrate and Perchlorate by Organoclay

Optimized Bentonite Clay Adsorbents for Methylene Blue Removal

Wastewater Treatment by Improving the Local Clay Capacity with Chemical and Thermal Activation

High efficiency of treated-phengite clay by sodium hydroxide for the Congo red dye adsorption: Optimization, cost estimation, and mechanism study

Adsorption separation of oxytetracycline hydrochloride using natural and nanostructured clay mineral of silica in synthetic solution: Integration to white and green chemistry metrics

Tetracycline adsorption/desorption by raw and activated Tunisian clays

Muscovite clay for methylene blue removal: advanced optimization and Al-guided breakthroughs-an independent application from prior antibiotic removal investigation

Removal of chloride ion from drinking water using Ag NPs-Modified bentonite: Characterization and optimization of effective parameters by response surface methodology-central composite design

Removal of Organic Matter from Tunisian Industrial Phosphoric Acid by Adsorption onto Purified Natural Illite/Kaolinite Clay: Kinetics, Isothermal and Thermodynamic Studies

The effect of kaolin particles on the behavior of nitrifying activated sludge units

Adsorption of Cr(VI) and Phosphate on Mg–Al Hydrotalcite Supported Kaolin Clay Prepared by Ultrasound-Assisted Coprecipitation Method Using Batch and Fixed-Bed Systems

Optimizing ciprofloxacin antibiotic adsorption on Algerian mineral clay for water remediation: a Box-Behnken design approach

Removal of an organophosphate insecticide from aqueous media using phyllosilicate clay: multivariable optimization, nonlinear kinetic modelling and thermodynamic study

Simple and Rapid Synthesis of Organically Modified Natural Acid Clay for the Adsorption of Anionic and Cationic Dyes

Adsorption of phosphate on iron oxide doped halloysite nanotubes