Abstract:Phosphate and nitrate enrichment largely impair aquatic ecosystem functions and services, thus comprising an emerging problem of environmental concern. The problem pertains to developing countries where their discharge to surface water is on the rise due to a rapid growth in population. Herein, these pollutants (phosphate and ammonia) were removed from real municipal wastewater using a simple, fast, and cost-effective process. Raw cryptocrystalline magnesite, a mineral abundant in South Africa, was simply milled and calcined (mechano-thermo processing) in order to produce the activated magnesite (feed). The feed was then used in batch processing for pollutants adsorption and precipitation from real wastewater. The process was optimised by varying the treatment or contact time, feed dosage, concentration, pH, and temperature. The feed and product mineral (produced sludge) were characterised using X-ray Diffraction (XRD), field emission scanning electron microscopy (FESEM) compatible with energy dispersive spectroscopy (EDS), and Fourier Transform Infrared Spectrometer (FTIR). It was identified that the optimal conditions differed for each pollutant, highlighting the importance of tailoring the process to fit the local wastewater characteristics and as part of a treatment train system. Specifically, maximum P removal was achieved after 5 min of mixing, using 1 g L-1 of feed, 123 mg L-1 initial phosphate concentration, pH 8 - 10, and was not affected by temperature variations; whereas, for ammonia removal, optimal conditions were 180 min, 16 g L-1 feed dosage, 80 mg L-1 initial concentration, pH 10 and temperature > 45 °C. The optimal conditions for the removal of both pollutants from real wastewater were 30 min, 6 g L-1 dosage, and ambient temperature and pH. Furthermore, Mg and Ca concentration was found to influence the process. Reduction in total dissolved solids (TDS) and electrical conductivity (EC) suggest an attenuation of chemical species. Characterisation revealed that the product mineral obtained under the optimal conditions for pollutants removal is rich in quartz, periclase, brucite, calcite, magnesite, and struvite. This was further supported by the FTIR results, which indicated the presence of Mg-O, PO43-, N-H and OH stretches. In addition, the EDS verified the presence of Mg, Ca and P in product mineral. Results are suggestive of the high efficiency of the mechano-thermo activated magnesite treatment process for phosphate and ammonia removal and struvite crystallization. Thus, this technology could valorise municipal wastewater effluents and open new horizons for the effective and sustainable management of wastewater effluents, since struvite can replace the mined phosphate fertilizers, which are rapidly depleting, in the agriculture industry.

Wastewater Treatment by Improving the Local Clay Capacity with Chemical and Thermal Activation

Elaboration and Characterization of Porous Materials from Moroccan Natural Resources: Application to Industrial Wastewater Treatment

Removal of phosphate from synthetic wastewater: A comparative study between both activated clays using an experimental design methodology

Study of the permeability of tubular mineral membranes: application to wastewater treatment

Removal of Organic Matter from Tunisian Industrial Phosphoric Acid by Adsorption onto Purified Natural Illite/Kaolinite Clay: Kinetics, Isothermal and Thermodynamic Studies

Coagulation-flocculation technique for domestic wastewater treatment in the city of Ain Aouda, Rabat, Morocco

Enhanced Pollutant Removal and Antifouling in an Aerobic Ceramic Membrane Bioreactor with Bentonite for Pharmaceutical Wastewater Treatment

Evaluation and improvement of the WWTP performance of an agricultural cooperative by adsorption on inert biomaterial: case of orthophosphate, nitrate and sulfate ions

Effective removal of nitrate ions from aqueous solution using new clays: Tamazert kaolin treated under microwave irradiation

Effect of acid leaching on the microstructure and adsorption properties of ground montmorillonite powder

High efficiency of treated-phengite clay by sodium hydroxide for the Congo red dye adsorption: Optimization, cost estimation, and mechanism study

Detailed study of Safranin-O adsorption on sepiolite clay: Kinetics, thermodynamics, isotherms and theoretical calculations for optimal water treatment efficiency

Adsorption, Modeling, Thermodynamic, and Kinetic Studies of Methyl Red Removal from Textile-Polluted Water Using Natural and Purified Organic Matter Rich Clays as Low-Cost Adsorbent

Characterizing and optimizing adsorption for olive mill wastewater processing in Loukkos, Morocco

Treatment of textile wastewater using monolayered ultrafiltation ceramic membrane fabricated from natural kaolin clay

Development of clayey ceramic membranes prepared with bio-based additives: Application in water and textile wastewater treatment

Contribution to the Treatment of Urban Wastewater in the City of Fez by Coagulation and Flocculation Using a Biodegradable Reagent

Wastewater treatment valorisation by simultaneously removing and recovering phosphate and ammonia from municipal effluents using a mechano-thermo activated magnesite technology

Effect of adding biochar from prickly pear skin to aluminium sulphate to improve the coagulation-flocculation process during the elimination of humic substances present in the Laghrous drainage canal Water, Zab El-gharbi region (SE Algeria)

Treating polluted water with modern technologies

organo acid-activated clays for water treatment as removal agent of Eosin-Y: Properties, regeneration, and single batch design absorber