Abstract:Clay minerals have large surface areas that contribute to their high adsorption capacity. Pure clays were often used. However, their prices remain expensive. However, the natural clay minerals that are locally available can have economic and environmental benefits for textile wastewater treatment. The tested natural clays had given low removal yields. Therefore, we wanted to test particular rich organic matter clay for adsorbing azo dye, which is a very toxic molecule. In order to make the use of this clay type have a better efficiency for removal of this dye from the polluted waters, the optimal conditions had been specified. The results indicated that advised conditions were as follows: 5 min was the contact time of dye-clay; the better adsorbent masses were 0.25 g and 0.5 g per 100 ml solution for raw (ANb) and purified clays (ANp), respectively; the initial dye concentrations were 1 gL −1 for raw clay and 50 mgL −1 for purified clay; pH solution had any effect on the yield of dye removal only when raw clay was used; however, acid environment was advised when purified clay was the adsorbent and for the two tested clays about 20–30°C was the better solution temperature. X-Ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) analysis confirmed that functional groups of clay adsorbed the dye. Langmuir maximum adsorption capacities of ANb and ANp were found to be 397 mgg −1 and 132.3 mgg −1 at pH 7 and 5, respectively. Raw and chemically activated samples gave similar results. Adsorption of ANb and ANp data showed better agreement with the pseudo-second-order kinetic model. Thermodynamic parameters of the two adsorbents confirmed that the adsorption was endothermic (ΔH > 0) and spontaneous (ΔG 0 < 0). Energy level was high when purified clay was used; however, it was significantly lower when the adsorbent was raw clay. Therefore, it was likely that adsorption by carbonates and organic matter involved small energy amounts. Comparing between these and other previous results, Jebel Louka natural clay type is better recommended for MR removal from textile wastewater, since the removal yield was about 98%. Hence, this tested clay type could provide an alternative low-cost material that could be used in treatment of the textile wastewater rich in MR and the obtained adsorption model and desorption tests provided a background for pilot and industrial scale applications.

Use of a novel low-cost adsorbent PANI@Clay composite to effectively remove OG dye from wastewater: Insights from isotherm kinetic and thermodynamic modeling, investigation using density functional theory DFT/MC/MD

Eco-friendly engineering of micro composite-based hydroxyapatite bio crystal and polyaniline for high removal of OG dye from wastewater: Adsorption mechanism and RSM@BBD optimization

Application of calcium alginate-PANI@sawdust wood hydrogel bio-beads for the removal of orange G dye from aqueous solution

Engineering of Calcium Alginate- PANI@Sawdust Wood hydrogel Bio-beads for the Removal of the Sulfonate Groups-Containing Orange G dye from Aqueous Solution

Polyaniline coated tungsten trioxide as an effective adsorbent for the removal of orange G dye from aqueous media

Adsorption, Modeling, Thermodynamic, and Kinetic Studies of Methyl Red Removal from Textile-Polluted Water Using Natural and Purified Organic Matter Rich Clays as Low-Cost Adsorbent

Adsorption of anionic acid red G dye on polyaniline nanofibers synthesized by FeCl 3 oxidant: Unravelling the role of synthetic conditions

Polyaniline doping induced abundant active sites in orange peel as an efficient adsorbent material for water treatment

Highly Reusable Nano Adsorbent Based on Clay-Incorporated Hydrogel Nanocomposite for Cationic Dye Adsorption

A nanocomposite based on polyaniline, nickel and manganese oxides for dye removal from aqueous solutions

Revealing the interface chemistry of polyaniline grafted biomass via statistical modeling of multi-component dye systems: optimization, kinetics, thermodynamics, and adsorption mechanism

Anionic Dye Removal with a Thin Cationic Polyaniline Coating on Cellulosic Biomaterial

Sequestration of hazardous alizarin Red S dye from water using mesoporous sponge-PANI composite

Efficient Removal of Cationic Dye from Wastewater using Novel Low-Cost Adsorbent, Cellulose-Clay Composite: Insights from Isotherm, Kinetic, Thermodynamic, and Molecular Dynamics Simulation Studies

Adsorption of anionic and cationic azo dyes from wastewater using novel and effective multicomponent adsorbent

Adsorbent Biomaterials Based on Natural Clays and Orange Peel Waste for the Removal of Anionic Dyes from Water

Polyelectrolyte electrostatically self-assembled modified porous polyacrylonitrile nanofibers as adsorbents for anionic dye removal

Protonated polyaniline and its derivatives as potential adsorbents for simultaneous reclamation of textile dyes and oil/water separation

Stable organicinorganic hybrid of polyaniline/α-zirconium phosphate for efficient removal of organic pollutants in water environment

Enhanced adsorption of cationic and anionic dyes from aqueous solutions by polyacid doped polyaniline

Synthesis, characterization and environmental application of an original adsorbent: polyaniline-coated luffa cylindrica