Abstract:This present study focused on the synthesis of BTHAAlg and BTHAGel hybrid composites using bentonite (BT), hydroxyapatite (HA), alginate (Alg) and gelatin (Gel) materials by in situ method. The developed BTHAAlg and BTHAGel bio‐clay‐ceramic hybrid composites were utilized for methylene blue (MB) adsorption. The developed BTHAAlg and BTHAGel hybrid composites can be reusable upto five cycles. Dyeing industries release their hazardous dyeing effluents into the environment which affects the human health and ecosystem. Hence, the removal of dye from waste‐water is mandatory one. In this present study, focus on the fabrication of bio‐clay‐ceramic hybrid composites by dispersing bentonite (BT) clay and ceramic hydroxyapatite (HA) into alginate (Alg) and gelatin (Gel) polymeric matrixes by in‐situ method which gives BTHAAlg and BTHAGel hybrid composites for methylene blue (MB) removal. The various adsorption influencing parameters such as shaking time, adsorbent dosage, pH and initial MB concentration were optimized under batch method. The highest MB adsorption capacities of BTHAAlg and BTHAGel composites were found to be 43.70 and 47.50 mg/g respectively with optimized conditions of 100 mg/L of initial MB concentration, 40 min shaking time and 0.1 g dosages. In pH studies, the high MB adsorption capacity of bio‐clay‐ceramic composites were noticed at pH 11. The characterization techniques like FTIR, SEM and EDAX analysis were performed to find the physico‐chemical properties of bio‐clay‐ceramic composites. The equilibrium data of hybrid composites towards MB adsorption was well fitted with Langmuir isotherm model than D‐R and Fruendlich models because of higher r and low sd values. The negative values of ▵Go at three different temperatures (303, 313 and 323 K) indicate that the spontaneous nature of MB adsorption, while positive values of ΔHo and ΔSo revealed that the MB adsorption onto hybrid composites was endothermic in nature and more randomness occurred at solid/liquid interfaces. In kinetic studies, the MB adsorption onto hybrid composites was well fitted with pseudo‐second‐order and intra‐particle diffusion models. The electrostatic attraction and hydrogen bonding plays a dominant role in MB adsorption onto BTHAAlg and BTHAGel bio‐clay‐ceramic composites. The regeneration studies proposed that the hybrid composites can be reusable upto five cycles. Hence, the developed bio‐clay‐ceramic hybrid composites were act as best adsorbents for MB removal.

Highly Reusable Nano Adsorbent Based on Clay-Incorporated Hydrogel Nanocomposite for Cationic Dye Adsorption

Highly selective and reusable nanoadsorbent based on expansive clay-incorporated polymeric nanofibers for cationic dye adsorption in single and binary systems

Decontamination of Congo red dye from aqueous solution using nanoclay/chitosan-graft-gelatin nanocomposite hydrogel

Optimizing malachite green dye removal with nano-silica clay in fixed-bed reactors

Bentonite clay reinforced alginate grafted composite hydrogel with remarkable sorptive performance toward removal of methylene green

Novel high-efficient adsorbent based on modified gelatin/montmorillonite nanocomposite for removal of malachite green dye

Green Electrospun Membranes Based on Chitosan/Amino-Functionalized Nanoclay Composite Fibers for Cationic Dye Removal: Synthesis and Kinetic Studies

Advanced nano modification of ecofriendly glauconite clay for high efficiency methylene blue dye adsorption

Efficient Removal of Cationic Dye from Wastewater using Novel Low-Cost Adsorbent, Cellulose-Clay Composite: Insights from Isotherm, Kinetic, Thermodynamic, and Molecular Dynamics Simulation Studies

Studying removal of anionic dye by prepared highly adsorbent surface hydrogel nanocomposite as an applicable for aqueous solution

Cationic and Anionic Dyes Adsorption from Wastewater by Clay-Chitosan Composite: an Integrated Experimental and Modeling Study

Elimination performance of Nile blue from wastewater using by carboxymethyl cellulose-graft-poly(methacrylic acid-co-acrylamide)/kaolin nanocomposite hydrogel

Alginate-Based Hydrogel Bead Reinforced with Montmorillonite Clay and Bacterial Cellulose-Activated Carbon as an Effective Adsorbent for Removing Dye from Aqueous Solution

Effect of bis[2-(methacryloyloxy)ethyl] phosphate as a crosslinker on poly(AAm-co-AMPS)/Na-MMT hydrogel nanocomposite as potential adsorbent for dyes: kinetic, isotherm and thermodynamic study

Cellulose-based hydrogel for adsorptive removal of cationic dyes from aqueous solution: isotherms and kinetics

Highly efficient and selective removal of anionic dyes from aqueous solutions using polyacrylamide/peach gum polysaccharide/attapulgite composite hydrogels with positively charged hybrid network

Synergistic sorption performance of karaya gum crosslink poly(acrylamide-co-acrylonitrile) @ metal nanoparticle for organic pollutants

Facile Fabrication of Hydroxyapatite and Bentonite Encapsulated Biopolymeric Hybrid Composites for Selective Removal of Methylene Blue

Ecofriendly k-Carrageenan-Based Hydrogel with Strong Adsorption and Higher Abilities to Remove Crystal Violet from Aqueous Solution: Thermodynamic, Isotherm and Kinetic Investigation

Collagen-Based Hydrogel Nanocomposite as Adsorbent for Methylene Blue and Crystal Violet Removal from Aqueous Solution: Isotherm, Kinetic, and Thermodynamic Studies

Biogenic Synthesis of Cr‐Doped NiO/Clay Composite for Improved Dye Removal and CO2 Capture Studies