Abstract:Clay minerals have large surface areas that contribute to their high adsorption capacity. Pure clays were often used. However, their prices remain expensive. However, the natural clay minerals that are locally available can have economic and environmental benefits for textile wastewater treatment. The tested natural clays had given low removal yields. Therefore, we wanted to test particular rich organic matter clay for adsorbing azo dye, which is a very toxic molecule. In order to make the use of this clay type have a better efficiency for removal of this dye from the polluted waters, the optimal conditions had been specified. The results indicated that advised conditions were as follows: 5 min was the contact time of dye-clay; the better adsorbent masses were 0.25 g and 0.5 g per 100 ml solution for raw (ANb) and purified clays (ANp), respectively; the initial dye concentrations were 1 gL −1 for raw clay and 50 mgL −1 for purified clay; pH solution had any effect on the yield of dye removal only when raw clay was used; however, acid environment was advised when purified clay was the adsorbent and for the two tested clays about 20–30°C was the better solution temperature. X-Ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) analysis confirmed that functional groups of clay adsorbed the dye. Langmuir maximum adsorption capacities of ANb and ANp were found to be 397 mgg −1 and 132.3 mgg −1 at pH 7 and 5, respectively. Raw and chemically activated samples gave similar results. Adsorption of ANb and ANp data showed better agreement with the pseudo-second-order kinetic model. Thermodynamic parameters of the two adsorbents confirmed that the adsorption was endothermic (ΔH > 0) and spontaneous (ΔG 0 < 0). Energy level was high when purified clay was used; however, it was significantly lower when the adsorbent was raw clay. Therefore, it was likely that adsorption by carbonates and organic matter involved small energy amounts. Comparing between these and other previous results, Jebel Louka natural clay type is better recommended for MR removal from textile wastewater, since the removal yield was about 98%. Hence, this tested clay type could provide an alternative low-cost material that could be used in treatment of the textile wastewater rich in MR and the obtained adsorption model and desorption tests provided a background for pilot and industrial scale applications.

Adsorbent Biomaterials Based on Natural Clays and Orange Peel Waste for the Removal of Anionic Dyes from Water

Sustainable use of low-cost adsorbents prepared from waste fruit peels for the removal of selected reactive and basic dyes found in wastewaters

Adsorption, Modeling, Thermodynamic, and Kinetic Studies of Methyl Red Removal from Textile-Polluted Water Using Natural and Purified Organic Matter Rich Clays as Low-Cost Adsorbent

Basic-dye adsorption in albedo residue: Effect of pH, contact time, temperature, dye concentration, biomass dosage, rotation and ionic strength

Sustainable and Circular Adsorption of Anionic Dye from Textile Wastewater Using Economical Adsorbent

Pomegranate peel-derived biochar as ecofriendly adsorbent of aniline-based dyes removal from wastewater

Water purification from cationic organic dyes using kaolin-based ceramic materials

Activated Ailanthus altissima Sawdust as Adsorbent for Removal of Acid Yellow 29 from Wastewater: Kinetics Approach

Efficient Removal of Cationic Dye from Wastewater using Novel Low-Cost Adsorbent, Cellulose-Clay Composite: Insights from Isotherm, Kinetic, Thermodynamic, and Molecular Dynamics Simulation Studies

Removal of Anionic Dyes from Aqueous Solutions by Cellulose-Based Adsorbents: Equilibrium, Kinetics, and Thermodynamics

Mechanism of acridine orange removal from water by low-charge swelling clays

Eco-friendly synthesis of clay-chitosan composite for efficient removal of alizarin red S dye from wastewater: A comprehensive experimental and theoretical investigation

Efficient Adsorption of Bulky Reactive Dyes from Water Using Sustainably-Derived Mesoporous Carbons.

Kinetic and thermodynamic analysis of alizarin Red S biosorption by Alhagi maurorum: a sustainable approach for water treatment

Alternative Utilization of Skin Wastes: Preparation of A Fe(Iii)-Loaded Adsorbent for Anionic Dyes in Aqueous Solution

Adsorption of anionic and cationic azo dyes from wastewater using novel and effective multicomponent adsorbent

Use of a novel low-cost adsorbent PANI@Clay composite to effectively remove OG dye from wastewater: Insights from isotherm kinetic and thermodynamic modeling, investigation using density functional theory DFT/MC/MD

Removal of Azo and Anthraquinone Dye by Plant Biomass as Adsorbent – A Review

Application of montmorillonite/octadecylamine nanoparticles in the removal of textile dye from aqueous solutions: Modeling, kinetic, and equilibrium studies

The Oxygen-Rich Pentaerythritol Modified Multi-Walled Carbon Nanotube As an Efficient Adsorbent for Aqueous Removal of Alizarin Yellow R and Alizarin Red S

Acridine Orange and Its Removal from Aqueous Solutions by Adsorption