Abstract:Dyes used in textiles, foods, cosmetics, and chemicals have become a major environmental pollution issue around the world. To address this issue, a number of technologies have been created to remove these pollutants from the environment. Due to their superior properties at nanoscale, numerous nanomaterials have been applied to remove dyes from polluted waters. This research presents the findings of the development of bentonite nano zero-valent iron (B-nZVI) for the treatment of synthetic cationic dyes. This study has three objectives: (i) to produce bentonite nano zero-valence iron (B-nZVI), (ii) to characterize its adsorbents (B-nZVI), (iii) to characterize its adsorption capacity. Four main tests were used for this purpose: (i) a physical test (Brunauer–Emmett–Teller (BET) surface area), (ii) a chemical test (cation exchange capacity (CEC) and X-ray fluorescence (XRF)), (iii) morphology (field emission scanning electron microscopy (FESEM) and (iv) mineralogy (Fourier transform infrared spectroscopy (FTIR). The five factors for the batch equilibrium test are adsorbent dose, concentration, kinetic, pH, and temperature. The batch test showed that the optimum dose for all adsorbents is 0.5 g. For the concentration factor, B-nZVI exhibits larger adsorption capacity (KL = 30,314.0536 L/g; R2 = 1) compared to bentonite (Kd = 0.0219 L/g; R2 = 0.8892). The kinetic factor showed that the adsorption capacity by pseudo-second-order model was the best for both adsorbents (qe = 1.2038 mg/g, R2 = 0.9993 for bentonite and qe = 6.9979 mg/g, R2 = 1 for B-nZVI). For B-nZVI, the interparticle diffusion model (Kf = 0.8645 m2 g−1 min L−1; R2 = 0.9) and intraparticle diffusion model (Kd = 2.3829 m2 g−1 min L−1; R2 = 0.9189) showed a good correlation with the adsorption data, while bentonite showed a lower correlation with the interparticle diffusion model (Kf = 0.0002 m2 g−1 min L−1; R2 = 0.6253) and intraparticle diffusion model (Kd = 0.2886 m2 g−1 min L−1; R2 = 0.6026), respectively. The pH factor showed that the adsorption capacity of bentonite (qe = 0.5674 mg/g) and B-nZVI (qe = 5.3284 mg/g) was highest in acidic conditions (pH 2). As for the temperature factor, there was no significant effect on bentonite and B-nZVI. Therefore, tests can be conducted at room temperature, saving energy. It was also concluded that B-nZVI is the best material for removing MB compared to bentonite and can be considered for the treatment materials of contaminated water.

Adsorption of methylene blue dye onto bentonite clay: Characterization, adsorption isotherms, and thermodynamics s tudy by using UV-Vis technique

Methylene Blue removal using polyamide-vermiculite nanocomposites: Kinetics, equilibrium and thermodynamic study

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Optimized Bentonite Clay Adsorbents for Methylene Blue Removal

Adsorption of Methylene Blue Dye and Analysis of Two Clays: A Study of Kinetics, Thermodynamics, and Modeling with DFT, MD, and MC Simulations

Adsorption of methyl orange and methylene blue from aqueous solutions on pure bentonite: statistical physical modeling provides an analytical interpretation

Methylene blue dye adsorption on Ghana's activated clay from Teleku Bukazo

Adsorption isotherm modeling for methylene blue removal onto magnetic kaolinite clay: a comparison of two-parameter isotherms

Adsorption of Methylene Blue by Bentonite Supported Nano Zero Valent Iron (B-nZVI)

The Adsorption of Dyes from Aqueous Solution Using Diatomite

Isotherms, kinetics and thermodynamic mechanism of methylene blue dye adsorption on synthesized activated carbon

Adsorption characteristics, isotherm, kinetics, and diffusion of modified natural bentonite for removing diazo dye

The adsorption behaviors of industrial dyes by natural mordenite: isotherm, kinetic, thermodynamic, and Box–Behnken design study

Advanced nano modification of ecofriendly glauconite clay for high efficiency methylene blue dye adsorption

Muscovite clay for methylene blue removal: advanced optimization and Al-guided breakthroughs-an independent application from prior antibiotic removal investigation

Substantial increase in adsorption efficiency of local clay-alginate beads toward methylene blue impregnated with SDS

Efficient wastewater decontamination using magnetic bentonite-alginate beads: A comprehensive study of adsorption dynamics, regeneration, and molecular interactions

Statistical Analysis of Phenol Removal Using Modified Iraqi Bentonite from Wastewater by Adsorption Process

The Use of an Organo-Kaolinite Sorbent in a Permeable Reactive Barrier for Remediating Groundwater Contaminated with Methylene Blue Dye: Experimental and Theoretical Investigation

Comparison of kinetic study of the adsorption of bromothymol blue on activated Attapulgite clay and commercial activated carbon

Artificial Neural Network Modeling of the Removal of Methylene Blue Dye Using Magnetic Clays: An Environmentally Friendly Approach