Abstract:The gas-solid flows in a two-dimensional downer of 10 m in height and 0.10 m in width were simulated using a CFD-DEM method, where the motion of particles was modeled by discrete element method (DEM) and the gas flow was described by Navier-Stokes equations. The simulations revealed a rich variety of developing flow structures in the downer under different operating conditions. The two-phase flow development can be clearly characterized by the micro-scale particle distributions in the downer. Near the inlet, the particle distribution is dominated by the distributor design. Then, the particles disperse in the column, forming a homogeneous transit region. After that clusters start to form and modulate the gas-solid flow field till the fully-developed state. The particle-scale simulation disclosed that the clusters are composed of loosely collected particles, and these particles have the same flow direction as the bulk flow so that no particle backmixing can be observed. As the particles in the downer have the tendency to maintain the inertia, the capability of lateral transfer of particles is relatively weak, which was illustrated by tracking the movement of the single particles and clusters. The simulations of the inlet effect on the hydrodynamics in the downer showed that the gas-solid flow structure and the mixing behavior are sensitive to the inlet design. An inappropriate design or operation would probably cause the undesired flow phenomena such as the wide distribution of residence times. The time-averaged hydrodynamics based on the transient simulations showed good agreement with the experimental findings in the literature. The simulation based on the CFD-DEM coupled approach provides a theoretical way to comprehensively understand the physics at micro- to macro-scales in the co-currently downward gas-solid flows. (c) 2009 Elsevier B.V. All rights reserved.

Numerical Simulation of Hydrodynamics Characteristics in a Tank with an Up-down Reciprocating Agitator

Computational Fluid Dynamics Simulation of Hydrodynamics in an Uncovered Unbaffled Tank Agitated by Pitched Blade Turbines

MEASUREMENT AND NUMERICAL SIMULATION OF FLOW FIELD IN STIRRED TANK WITH MULTIPLE IMPELLERS

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

Computational Fluid Dynamics Simulation of Bubble Size and Local Gas Holdup in Stirred Vessel

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Numerical Simulation of Turbulent Flow Field in Industrial-Scale Side-Entering Stirred Tank

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Numerical Simulation of Three-dimensional Flow Field in Settling Tank with Mechanical Agitation

Numerical simulation of mixing process in a stirred tank agitated by side-entering agitators

Numerical Simulation of Three-dimensional Flow Fields in a Vertical-shaft Mechanical Mixing Tank

Numerical Simulation of Turbulent Vortex Induced Vibration of a Circular Cylinder Adopted ALE Domain Decomposition Method

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

Experimental and Numerical Studies of the Flow Field in a Stirred Tank Equipped with Multiple Side‐Entering Agitators

Numerical Simulation of Rotor-stator Mixer with Viscous Fluids

Numerical Simulation of Gas-Liquid Two-Phase Flow in Agitator Tank of Autoclave

Quantitative Assessment of Agitator Performance in an Anchor-Stirred Tank: Investigating the Impact of Geometry, Eccentricity, and Rheological Characteristics

CFD Simulation of Average and Local Gas–Liquid Flow Properties in Stirred Tank Reactors with Multiple Rushton Impellers

Numerical Simulation of Flow Field and Configuration Optimization of a Reciprocating Baffled Flocculation Tank

Numerical Analysis of the Unsteady Rotor/Stator Interaction Flow in an Agitator

Numerical Simulation of Mixing Processes for Pseudoplastic Fluids in Industrial Scale Stirred Tank Agitated by Two Types of Impellers