Abstract:Recent decades have witnessed the increasing usage of deep cement mixing (DCM) mixers in the field of marine infrastructure construction. The mixing performance, including the torque history, can be helpful for structural safety evaluation, design, and the optimization of agitators, which is of engineering significance. However, to the best of the authors’ knowledge, there are no related publications that have reported the mixing behaviors of deep cement mixing agitators. In light of this, the present work conducts experimental and numerical investigations of the mixing behaviors of a DCM ship mixing agitator. To achieve this end, a model test device is established, and mixing experiments using two- and three-blade mixers are respectively conducted. Silt and clay soils are considered in the experiments with a three-blade mixer, while clay soils are used for those with a two-blade mixer. In addition, this work designs a torque transducer placed inside the rotating rod to accurately measure the torque history of the agitator during model test experiments. The experimental results show that, when mixing clay using agitators with different blades, the average torque value required for a two-blade agitator is slightly larger than that for a three-blade one. This study also presents a computational framework based on the arbitrary Lagrangian–Eulerian (ALE) method for an efficient and accurate modeling of the soil-mixing behaviors of the agitator. The numerical results are found to be in good agreement with the experimental data from model tests in terms of torque history, which demonstrates the effectiveness and capacity of our presented computational framework. The numerical results show that the average torque value is smaller at a higher rotational speed during the mixing of clay using a two-bladed agitator, but the effect of rotational speed on the torque history is small. The experimental and numerical methods introduced in the present work can act as a useful tool for investigations of mixing behaviors of DCM agitators.

Quantitative Assessment of Agitator Performance in an Anchor-Stirred Tank: Investigating the Impact of Geometry, Eccentricity, and Rheological Characteristics

Computational Fluid Dynamics Simulation of Hydrodynamics in an Uncovered Unbaffled Tank Agitated by Pitched Blade Turbines

MEASUREMENT AND NUMERICAL SIMULATION OF FLOW FIELD IN STIRRED TANK WITH MULTIPLE IMPELLERS

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Study on the Numerical Model of Gas-Liquid Dispersion Driven by a Coaxial Mixer

Experimental and Numerical Studies of the Flow Field in a Stirred Tank Equipped with Multiple Side‐Entering Agitators

Numerical Simulation of Hydrodynamics Characteristics in a Tank with an Up-down Reciprocating Agitator

Experimental Characterisation and Modelling of Homogeneous Solid Suspension in an Industrial Stirred Tank

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

Experimental and Numerical Investigations of Mixing Performance of Mixing Agitators of Deep Cement Mixing Ships

Experimental Study of Influence of the Impeller Spacing on Flow Behaviour of Double‐Impeller Stirred Tank

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Numerical Simulation of Gas-Liquid Two-Phase Flow in Agitator Tank of Autoclave

Kinematic Properties of a Twisted Double Planetary Chaotic Mixer: A Three-dimensional Numerical Investigation

Mitigation of vibration and free-surface instabilities by using anti-vortex baffles in an industrial stirred vessel

Numerical Simulation of Solid-Liquid Mixing Characteristics in a Stirred Tank with Fractal Impellers

Numerical simulation of mixing process in a stirred tank agitated by side-entering agitators

Incompressible Smoothed Particle Hydrodynamics Modeling and Investigation of Fluid Mixing in a Rectangular Stirred Tank with Free Surface

The transition to aeration in two-phase mixing in stirred vessels

Turbulent CFD Simulation of Two Rotor-Stator Agitators for High Homogeneity and Liquid Level Stability in Stirred Tank