Abstract:The recycling of construction and demolition waste (CDW) for the extraction of recycled concrete aggregates (RCAs) to be used to produce recycled aggregate concrete (RAC) is widely acknowledged internationally. However, CDW not only contains concrete debris but may also contain burnt clay bricks. The recycling of such CDW without the segregation of different components would result in recycled aggregates having different proportions of concrete and brick aggregates. The utilization of these aggregates in concrete requires a detailed investigation of their mechanical and durability properties. In this regard, the present study focused on investigating the mechanical and durability properties of hybrid recycled aggregate concrete (HRAC) made by the 100% replacing of natural aggregates with recycled brick (RBAs) and RCA in hybrid form. The partial replacement of cement with fly ash was also considered to reduce the corban footprint of concrete. An extensive experimental program was designed and carried out in two phases. In the first phase, a total of 48 concrete mixes containing coarse RBA and RCA in mono and hybrid forms were prepared and tested for their compressive strength. The test results indicated that the compressive strength of HRAC is greatly affected by the proportion of coarse RBA and RCA. In the second phase, based on the results of the first phase, eight concrete mixes with the most critical proportions of RBA and RCA in hybrid form were selected to evaluate their mechanical and durability performance. In addition, four mixes with natural aggregates were also prepared for comparison purposes. To evaluate the mechanical properties of the concrete mixes, compressive strength and modulus of rupture (MOR) tests were performed, while for the evaluation of durability properties, water absorption and behavior after exposure to aggressive conditions of acidic and brine solutions were studied. The results revealed that a 20% replacement of cement with fly ash resulted in acceptable mechanical and durability properties of HRAC intended to be used for making concrete bricks or pavers.

Fresh and hardened properties of concrete made with recycled brick aggregate

Behavior of FRP-Confined Recycled Brick Aggregate Concrete under Monotonic Compression

Characterizations and Quantification of Freeze-Thaw Behaviors of Recycled Brick Aggregate Concrete

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

Enhancement Strategies for Recycled Brick Aggregate Concrete Using MICP and EICP Treatments

Mechanical and Durability Characterization of Hybrid Recycled Aggregate Concrete

Mechanical properties of recycled concrete with demolished waste concrete aggregate and clay brick aggregate

Mechanical properties of recycled aggregate concrete containing brick particles

Properties of Concrete Containing Strengthened Crushed Brick Aggregate by Pozzolan Slurry

Sustainable Concrete: Exploring Fresh, Mechanical, Durability, and Microstructural Properties with Recycled Fine Aggregates

Mechanical Damage and Freeze‒Thaw Damage of Concrete with Recycled Brick Coarse Aggregate

An Approach to Effectively Improve the Properties of Recycled Concrete Aggregate and Recycled Brick Aggregate by Micro-Nano Particle Reconstruction

Structural aspects of concrete incorporating recycled coarse aggregates from construction and demolished waste

Influence of bio-deposited recycled aggregate on the concrete properties

Study of the Relationship Between the Water Binder Ratio and Strength of Mixed Recycled Aggregate Concrete Based on Brick Content

Study on Mechanical Properties and Microscopic Mechanism of PVA-Modified Recycled Brick Aggregate Concrete

Combined Freeze-Thaw and Chloride Attack Resistance of Concrete Made with Recycled Brick-Concrete Aggregate

Effects of brick-concrete aggregates on the mechanical properties of basalt fiber reinforced recycled waste concrete

Effect of brick aggregate on failure process of mixed recycled aggregate concrete via X-CT

Eco-friendly concrete with chemically treated end-of-life tires: Mechanical strength, shrinkage, and flexural performance of RC beams