An Approach to Effectively Improve the Properties of Recycled Concrete Aggregate and Recycled Brick Aggregate by Micro-Nano Particle Reconstruction

Tao Meng,Zhejie Lai,Xiufen Yang,Dawang Dai,Yizhou Jia,Haiying Yu

DOI: https://doi.org/10.1016/j.conbuildmat.2024.135669

IF: 7.4

2024-01-01

Construction and Building Materials

Abstract:The utilization of construction and demolition waste (CDW) to produce recycled aggregate (RA) is a viable so-lution to address the dwindling natural aggregate reserves. Nonetheless, inherent flaws make it challenging to use these RA effectively, highlighting the need to enhance their properties. One promising approach is the surface reconstruction of mixed recycled aggregate (MRA). Using micro-nano materials for surface strengthening notably improves aggregate fundamental properties. This paper investigates the properties of recycled brick aggregate (RBA) and recycled concrete aggregate (RCA) before and after reconstruction. Five different micro- nano slurries in varying ratios were employed to reconstruct the RA particles and the physical, mechanical, and structural attributes of the aggregate were assessed. The findings indicate that slurry, combined with mineral admixtures and nano-calcium carbonate, optimally strengthens the RCA. The water absorption rate of RCA decreased from 12% to 9%, the crushing index decreased from 25% to 21%, the apparent density increased by 10 kg/m3 and the porosity decreased by 3%. For RBA, each slurry formulation incorporating nano-calcium carbonate proved effective. The water absorption rate, crushing index decreased from 20% to 14% and 35-32% separately. The apparent density increased by 45 kg/m3 and the porosity decreased by 32.4%. These nanomaterials maximize their filling and nucleation effects, consolidating the interface structure, and thereby enhancing performance. It yields a compact interfacial transition zone (ITZ) and reduces the aggregate's overall porosity. These findings hold significant implications for the reuse of MRA