Abstract:In the concrete preparation 70–80 % occupying natural aggregates like crushed rock and river sand, the most commonly used coarse and fine aggregate is likely become scarcer the it is today. Now construction people need the alternatives to natural aggregates. Therefore, finding alternatives to naturally available materials is important to sustaining construction industry. On other hand a large quantity of waste materials are being produced by various industries and the governments are seeking ways to reduce the problem of disposal and to control the health hazard from the accumulation of waste materials. Some of the waste materials, such as coal fly ash, bottom ash, glass granules, plastic granules, copper slag, and crushed rock dust were used in the concrete. So in such waste materials are used to modify the mechanical and durability properties of concrete so as to make it suitable for any situation, this would also additional benefits in terms of reduction in cost, energy savings, promoting ecological balance and conservation of natural resources. In this study, the production of concrete was obtained by partially replacing the fine aggregate with Crumb rubber. The main advantages of crumb rubber utilization in concrete to give the lower density, higher impact and toughness resistance, enhanced ductility, and better sound insulation etc. Crumb rubber is made by shredding waste tires. In the shredding process the steel wires are removed from the discard tires. The crumb rubber particle size ranging from 0.075 mm to not exceeding 4.75 mm, similar to the fine aggregates. Experimental investigations were carried out to study the behaviour of concrete with and without Crumb rubber. The replacement of crumb rubber contents varying 5–25 % of river sand by volume. The test results indicated that the addition of waste tire crumb rubber substitution increases, the density, Compressive strength and Static modulus of elasticity was decreased. At the same time the Flexural strength was increased up to 15 % of crumb rubber replacement. The relationship between Static modulus of elasticity and Flexural strength with Compressive strength of concrete with and without Crumb rubber was analyzed and compared the experimental results with the empirically calculated values by using design codes.

Eco-friendly concrete with chemically treated end-of-life tires: Mechanical strength, shrinkage, and flexural performance of RC beams

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

Characterizations and Quantification of Freeze-Thaw Behaviors of Recycled Brick Aggregate Concrete

Bending Performance of Reinforced Concrete Beams with Rubber as Form of Fiber from Waste Tires

Flexural Behavior of Reinforced Rubberized Reactive Powder Concrete Beams under Repeated Loads

Mechanical and microstructural characterization of sustainable concrete containing recycled concrete and waste rubber tire fiber

Carbonation Depth and Chloride Ion Penetration Properties of Rubberised Concrete Incorporated Ground Blast Furnace Slag

Improved strength performance of rubberized Concrete: Role of ground blast furnace slag and waste glass bottle nanoparticles amalgamation

Recycled Untreated Rubber Waste for Controlling the Alkali–Silica Reaction in Concrete

Strength, durability and shrinkage behaviours of steel fiber reinforced rubberized concrete

Investigation of the Behaviour of Concrete Containing Waste Tire Crumb Rubber

Effect of recycled rubber aggregate size on fracture and other mechanical properties of structural concrete

Improving the mechanical properties and durability of steam-cured concrete by incorporating recycled clay bricks aggregates from C&D waste

Mechanical Properties of Rubberised Geopolymer Concrete

Fresh and hardened properties of concrete made with recycled brick aggregate

Concrete with a High Content of End-of-Life Tire Materials for Flexural Strengthening of Reinforced Concrete Structures

Performance analysis and engineering application of waste rubber crumbs in concrete

Investigation on Improvement in Shear Performance of Reinforced-Concrete Beams Produced with Recycled Steel Wires from Waste Tires

Effect Of Pozzolan Slurries On Recycled Aggregate Concrete: Mechanical And Durability Performance

Influence of ceramic waste powder on shear performance of environmentally friendly reinforced concrete beams

Mechanical behavior in terms of shear and bending performance of reinforced concrete beam using waste fire clay as replacement of aggregate