Abstract:Plastic injection molding is widely used in many industrial applications. Plastic products are mostly used as disposable parts or as portable parts for fast replacements in many devices and machines. However, mass production is always adopted as an ideal method to cover the huge demands and customers’ needs. The problems of warpage due to thermal stresses, non-uniform pressure distribution around cavities, shrinkage, sticking and overall products quality are some of the important challenges. The main objective of this work is to analyze the stress distribution around the cavities during the molding and demolding to avoid their effects on the product quality. Moreover, diagnosing the critical pressure points around and overall the cavity projection area, which is subjected to high pressure will help to determine the optimum pressure distribution and ensure filling all cavities at the same time, which is another significant objective. Computer-aided design (CAD) and CATIA V5R20 are adopted for design and modeling procedures. The computer-aided engineering (CAE) commercial software ABAQUS 6141 has been dedicated as finite element simulation packages for the analysis of this process. Simulation results show that stress distribution over the cavities depends on both pressure and temperature gradient over the contact surfaces and can be considered as the main affecting factor. The acceptable ranges of the cavity stresses were determined according to the following values: the cavity and core region temperature of 55–65 °C, filling time of 10–20 s, ejection pressure 0.85 % of injection pressure, and holding time of 10–15 s. Also, theoretical results reveal that the uniform pressure and temperature distribution can be controlled by adjusting the cavities layout, runner, and gate size. Moreover, the simulation process shows that it is possible to facilitate and identify many difficulties during the process and modify the prototype to evaluate the overall manufacturability before further investing in tooling. Furthermore, it is also concluded that tooling iterations will be minimized according to the design of the selected process

Optimization of precharge placement in sheet molding compound process

Quantification of the Influence of Charge Variations on the Flow Behavior of Sheet Molding Compounds

Optimization of the Compression (Injection/Compression) Molding Process Using Numerical Simulation

Non-isothermal direct bundle simulation of SMC compression molding with a non-Newtonian compressible matrix

Comprehensive Assessment and Multiple-Response Optimization of Serpentine Channel Pouring Process for Achieving High-Quality Semi-Solid Slurry

Numerical investigation of the effects of chopped carbon fiber bundle dimensions on properties of sheet molding compound

Rheological In-Mold Measurements and Characterizations of Sheet-Molding-Compound (SMC) Formulations with Different Constitution Properties by Using a Compressible Shell Model

Optimizing Epoxy Molding Compound Processing: A Multi-Sensor Approach to Enhance Material Characterization and Process Reliability

Optimization of the cycle time in resin transfer molding process by numerical simulation

Numerical Simulation and Process Optimization of a 3D Thin-Walled Polymeric Part Using Injection Compression Molding

Optimizing the Gating System for Rapid Investment Casting of Shape Memory Alloys: Computational Numerical Analysis for Defect Minimization in a Simple-Cubic Cell Structure

Improving Cooling Performance of Injection Molding Tool with Conformal Cooling Channel by Adding Hybrid Fillers

Analysis of the main factors affecting mass production in the plastic molding process by using the finite element method

Coupling of injection molding process to mechanical properties of short fiber composites: A through process modeling approach

Analysis and Optimization of the Silicone Molding Process Based on Numerical Simulations and Experiments

Numerical simulation with experimental validation of the structural reaction injection moulding of 3D continuous fibre reinforced polyurethane foam

Numerical Simulation of Mold Filling of Polymeric Materials with Friction Effect during Hot Embossing Process at Micro Scale

An adaptive matrix material extrusion optimization model for in situ impregnated continuous fiber-reinforced 3D printing

Investigating the impact of infill patterns on shape memory effect in material extrusion

Full‐field effect of flow‐induced fiber orientation during compression molding of carbon fiber sheet molding compounds

A probabilistic virtual process chain to quantify process-induced uncertainties in Sheet Molding Compounds