Abstract:The shape memory behavior of smart materials is widely used for stimulation or shape-shifting purposes. Shape memory polymers (SMPs) can shape and force recoveries accompanied by attractive attributes such as biocompatibility, biodegradability, and universality. In this paper, a thermoplastic elastomer (TPE) is used as a complementary material for 4D printed polylactic acid (PLA) structures to enhance their shape and force recovery properties and lower the stimulation temperature for more practical implementations. Two approaches are followed to provide SMP composites (SMPCs): multi-layered and multi-material lattices. In multi-layered lattices, specimens are comprised of separate layers and different ratios of SMP and TPE materials. For comparison, PLA-TPE filaments with the same ratios of multi-layered lattices are produced and used to fabricate multi-material lattices. Dynamic mechanical thermal analysis tests showed a reduction in the glass transition temperature of the manufactured PLA-TPE filament. X-ray diffraction test was conducted to prove that the crystallinity of the developed PLA-TPE material increases which explains the better shape memory effect in the multi-material specimens. Phase separation occurred in low ratios of TPE in PLA, discernible in field emission scanning electron microscope (FESEM) images, resultting in low quality in one of the developed PLA-TPE filaments. FESEM images also showed proper miscibility of TPE in PLA in higher ratios. Thermomechanical tests were done on printed specimens to examine and compare the shape and force recovery of the produced SMPCs. While the shape recovery of multi-material samples was not as good as multi-layered samples, both approaches have better shape recovery results than the PLA sample. Due to a lower glass transition temperature in multi-material lattices, their shape recovery process started at lower temperatures widening their potential practical applications. Force recovery of multi-material samples revealed a significant improvement which was due to more oriented crystalline polymer structures.

Investigating the impact of infill patterns on shape memory effect in material extrusion

Recent Progress in Shape Memory Polymer: New Behavior, Enabling Materials, and Mechanistic Understanding

Digital Laser Direct Writing of Internal Stress in Shape Memory Polymer for Anticounterfeiting and 4D Printing.

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

Recent Advances in Polymer Shape Memory

Shape Memory Epoxy: Composition, Structure, Properties and Shape Memory Performances

Influence of Infill Patterns on the Shape Memory Effect of Cold-Programmed Additively Manufactured PLA

Modeling the Thermo-Mechanical Behavior and Constrained Recovery Performance of Cold-Programmed Amorphous Shape-Memory Polymers

High-Performance Multifunctional Shape Memory Epoxy with Hybrid Graphene Oxide and Carbon Nanotube Reinforcement

Unique Recovery Behavior in Amorphous Shape‐Memory Polymer Networks

3D Printed Shape Memory Polymers Produced via Direct Pellet Extrusion

AI-Driven Data Analysis of Quantifying Environmental Impact and Efficiency of Shape Memory Polymers

Enhancing shape memory properties of multi-layered and multi-material polymer composites in 4D printing

Shape-morphing composites with designed micro-architectures

Advanced Infill Designs for 3D Printed Shape-Memory Components

Evaluation of Shape Recovery Performance of Shape Memory Polymers with Carbon-Based Fillers

Analysis of Shape Memory Behavior and Mechanical Properties of Shape Memory Polymer Composites Using Thermal Conductive Fillers

Characterization of 4D printed shape memory and conventional polymer blends for thermal responsive applications

Shape Memory Polymers: A Potential Material for Future’s Changing Shape

4D Printing of Recyclable Lightweight Architectures Using High Recovery Stress Shape Memory Polymer

Mechanical behaviors and applications of shape memory polymer and its composites